Cylinder pistons - Import export

Pneumatic special cylinder in tandem design with two separately controllable chambers and different strokes. Piston rods with anti-twist protection. Complete with connection elements for free suspension according to customer specifications.

Double-acting pneumatic cylinder with piston rod in a special design for use in a press-in device.s

In the serial arrangement, a vertically aligned linear drive shaft (double-acting linear cylinder) is mounted on the vertically aligned rotary drive shaft (swivel motor), i.e. the piston rod of the cylinder and the output shaft of the swivel motor are mechanically coupled via a movable shaft-hub connection. The pallet holder is lifted by the piston rod, which also serves as a bearing for the pallet holder and safely absorbs all the forces generated during asymmetrical loading. We offer customized solutions for various applications. Our qualified team will be happy to advise you.

The stopper cylinders are developed to stop or block moving parts, e.g. in an assembly line. The large dimensioned piston rod also allows use as a stand-by stop device.

The CQ series cylinders are manufactured according to ISO 15552 and have diameters between 160 and 250 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.

block cylinder piston Ø 20 mm, stroke 10 mm max. 500 bar, as per data sheet B1.711

threaded-body cylinder piston Ø 20 mm, stroke 10 mm max. 500 bar, as per data sheet B1.711

low-block clamping cylinder piston Ø 20 mm, stroke 10 mm max. 500 bar, as per data sheet B1.711

Single-acting pneumatic cylinder with two parallel working piston rods made of brass, nickel-plated or stainless steel.

Cylinder with double piston rod as anti-rotation device against linear movement of the piston rod. Design based on ISO standard. Available sizes diameter: 32, 40, 50, 63, 80, 100 mm.

Large-volume pneumatic cylinder with through-piston rod for use as a die-cushion press balancing cylinder in a mechanical press.

Cylinders with Ertalyte piston rods are particularly suitable for use in the food and chemical industries. High resistance to acids, good electrical insulating properties, wear resistance, excellent sliding properties and even resistance to gamma rays or X-rays allow it to be used under difficult conditions. For the use of pneumatic cylinders in environments with radioactive radiation, we also stock cylinders with radiation-resistant seals.

AKSOIL MARINE OIL LC SERIES high quality base oils and state-of-the-art additives Highly alkaline vessel produced with a special combination of packages engine cylinder oil. It is used in the cylinders of low speed crosshead ship engines using heavy diesel fuel (high sulfur). Thanks to the special dispersants in its formula, balanced with the additives that regulate the cleaning and acidity, it provides a superior cleaning on the cylinder liners, piston rings and the bottom of the piston.

Valve Technology Traction force range max. 1,200 N Stroke 30 mm The solution to a lack of space: If standard push type gas springs cannot be used due to a lack of space, ACES' industrial pull type gas springs come into their own. They work in the opposite way to standard push type gas springs. The piston rod is retracted when the cylinder is unloaded. The gas pressure in the cylinder draws the piston rod in. ACE pull type gas springs offer the maximum service life thanks to the solid chrome-plated piston rod and an integrated sliding bearing. The maintenance-free and ready-to-install products are available in body diameters of 15 to 40 mm as well as forces from 40 to 5,000 N and are available from stock with valve and large selection of accessories. The traction force can be subsequently adjusted using the valve.

Valve Technology Traction force range max. 300 N Stroke 30 mm The solution to a lack of space: If standard push type gas springs cannot be used due to a lack of space, ACES' industrial pull type gas springs come into their own. They work in the opposite way to standard push type gas springs. The piston rod is retracted when the cylinder is unloaded. The gas pressure in the cylinder draws the piston rod in. ACE pull type gas springs offer the maximum service life thanks to the solid chrome-plated piston rod and an integrated sliding bearing. The maintenance-free and ready-to-install products are available in body diameters of 15 to 40 mm as well as forces from 40 to 5,000 N and are available from stock with valve and large selection of accessories. The traction force can be subsequently adjusted using the valve.

Valve Technology Traction force range max. 150 N Stroke 20 mm The solution to a lack of space: If standard push type gas springs cannot be used due to a lack of space, ACES' industrial pull type gas springs come into their own. They work in the opposite way to standard push type gas springs. The piston rod is retracted when the cylinder is unloaded. The gas pressure in the cylinder draws the piston rod in. ACE pull type gas springs offer the maximum service life thanks to the solid chrome-plated piston rod and an integrated sliding bearing. The maintenance-free and ready-to-install products are available in body diameters of 15 to 40 mm as well as forces from 40 to 5,000 N and are available from stock with valve and large selection of accessories. The traction force can be subsequently adjusted using the valve.

Length of the cylinder retracted / extended / piston stroke: 390 / 1300 / 910 mm; Weight: 20,2 kg; Working/Test pressure: 16 MPa / 20 MPa; Outer diameter of the cylinder: 110 mm; Hydraulic connector: G1/2"; Volume of oil required: 3,5 L;

Length of the cylinder retracted / extended / piston stroke: 366,5 / 1166,5 / 800mm; Weight: 20,72 kg; Working/Test pressure: 16 MPa / 20 MPa; Outer diameter of the cylinder: 108 mm; Hydraulic connector: G1/2"5; Volume of oil required: 3 L;

Length of the cylinder retracted / extended / piston stroke : 396,5 / 1096 / 700mm; Weight: 18,26 kg; Working/Test pressure: 18 MPa / 22 MPa; Diameter of the cylinder: 95 mm; Output to connectors: M22x1.5; Volume of oil required: 2,5 L;

Length of the cylinder retracted / extended / piston stroke : 425 / 1010 / 585 mm; Weight: 18,76 kg; Working/Test pressure: 16 MPa / 20 MPa; Oil feed connector: M22*1.5 internal thread; External width of the cylinder: 110 mm; Required volume of oil: 3 L;

Weight: 19,69 kg; Working/Test pressure: 16 MPa / 20 MPa; Outer diameter of the cylinder: 95 mm; Hydraulic connector: M22*1,5; Required volume of oil: 2 L; Start pressure: 0,5 MPa; Piston extension/retraction speed: 0,5m/s; Permissible ambient temperature: -40 to +60℃; Permissible oil temperature: -15 to +80℃; Type of gland: threaded, screwed into the tube; Piston rod chrome-plated: 20µm; Type of fluid: mineral oil based hydraulic fluid;

Weight: 19,69 kg; Working/Test pressure: 16 MPa / 20 MPa; Outer diameter of the cylinder: 95 mm; Hydraulic connector: M22*1,5; Required volume of oil: 2 L; Start pressure: 0,5 MPa; Piston extension/retraction speed: 0,5m/s; Permissible ambient temperature: -40 to +60℃; Permissible oil temperature: -15 to +80℃; Type of gland: threaded, screwed into the tube; Piston rod chrome-plated: 20µm; Type of fluid: mineral oil based hydraulic fluid;

Length of the cylinder retracted / extended / piston stroke: 715 / 3315 / 2600 mm; Weight: 118,69 kg; Working/Test pressure: 16 MPa / 20 MPa; Diameter of the cylinder: 185 mm; Oil feed connector: G3/4" female thread;

Length of the cylinder retracted / extended / piston stroke : 685 / 2685 / 2000mm; Weight: 53,62 kg; Working/Test pressure: 16 MPa / 20 MPa; Diameter of the cylinder: 128 mm; Oil line connector: G1/2"; Required volume of oil: 11 L;

Length of the cylinder retracted / extended / piston stroke: 550 / 2400 / 1850 mm; Weight: 62,19 kg; Working/Test pressure: 16 MPa / 20 MPa; Diameter of the cylinder: 165 mm; Oil feed connector: G3/4"; Required volume of oil: 16 L;

Length of the cylinder retracted / extended / piston stroke: 581 / 2281 / 1700 mm; Weight: 62,19 kg; Working/Test pressure: 16 MPa / 20 MPa; Diameter of the cylinder: 150 mm; Oil line connector: M22*1.5 internal thread; Required volume of oil: 13 L;

Length of the cylinder retracted / extended / piston stroke : 610 / 1930 / 1320 mm; Weight: 64,38 kg; Working/Test pressure: 16 MPa / 20 MPa; Oil feed connector: M24*1,5 internal thread; External width of the cylinder: 130 mm; Required volume of oil: 8,5 l;

Length of the cylinder retracted / extended / piston stroke: 474 / 1774 / 1300 mm; Weight: 39.68 kg; Working/Test pressure: 16 MPa / 20 MPa; Diameter of the cylinder: 128 mm; Oil line connector: M22*1.5 internal thread.; Required volume of oil: 8 L;