Cut trim - Import export

Balaclava made of double-layer knitted fabric sewn together with a flat seam, which has been additionally secured against ripping with a locking stitch. The product has a cutout in the face with the possibility of covering the nose and mouth. The cut is trimmed with a basic knit trim, the seam has been secured against ripping with a bolt stitch. Logo, size, maintenance stamps together with the standard are embossed on the inside at the bottom of the balaclava.

Single knit balaclava with an elongated collar, sewn with a flat seam, which has been additionally secured against ripping with a locking stitch. The product has a cutout in the face with the possibility of covering the nose and mouth. The cut is trimmed with a basic knit trim and the seam has been secured against ripping with a bolt stitch. Logo, size, maintenance stamps together with the standard are embossed on the inside at the bottom of the balaclava. A label is sewn on to the seam of the hemming of the lower cuff from the inside of the product.

The patented bag closing system “Over Tape Bag Sealer” from STATEC BINDER seals woven polypropylene (PP) bags airtight. A woven PP tape is used for a reliable and secure closure. If necessary, the bags can also be sewn. Both pillow bags and gusset bags can be securely closed. This sealing technology facilitates the handling of dusty and odour-intensive products of the food and feed industry. During operation, the filled bags are transported to and from the bag closing system via a conveyor belt. A sensor detects the position of the bag and automatically puts it into the trimming area. After cutting the top edge of the bag a woven PP tape is applied over the open edge of the bag to seal it with hot air. The hot air to seal the bag airtight and odourless is produced by a heating unit in the machine.

The smart solution: Fully-automatic defatting machine ASD 460 enables removal of fat layers from loins and cutlets in predefined strengths. Advantages Fully-automatic recognition of the fat strength using Weber camera technology, with programmable controlled movementalong longitudinal profile Continuous work process Sensor-controlled electronic spring for perfect pressure application Uniform fat layers Considerable minimisation of reworking (trimming) Back bacon instead of small trimming cuts Clearly improved product image for cooking after slicing Product-specific blade holders Combinable with pre-installed derinder Options: Special Weber transport rollers Product-specific blade holders Product-specific pressure devices for products withand without bones Fixed or adjustable guide plates for supply and output belts

Impulse sealers MG 820 series, with 820 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealers bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 820: bench sealing machine with manual closing of the bars MGMI 820: bench sealing machine with motorized bar closing and electric pedal

Impulse sealers MG 621 series, with 620 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. The MG 621 series sealing machines are available with mechanical or motorized closing bars with 3 or 5 mm sealing thickness depending on the model. Also available in stainless steel with mechanical closure of the bars and and 3 mm sealing.

MG 421 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 421 series with 420 mm sealing bar and suitable for sealing polyethylene pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. They can be equipped with special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized closing of the bars. The MG 421 series sealing machines are available with bars with mechanical or motorized closure with a sealing thickness of 3 or 5 mm depending on the model. There are also special models in stainless steel and with 2 parallel welds of 3 mm.

MG 1020 SEALING MACHINE WITH CLOSING MAGNET Pulse sealers MG 1020 series, with 1020 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 1020: bench sealing machine with manual closing of the bars MGMI 1020: bench sealing machine with motorized closing of the bars and electric pedal

MG 300 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 300 series, with 300 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Maximum weldable thickness 0.15 mm (0.30 tot). Available models: MG 300: bench sealing machine with manual closing of the bars MGM 300: bench sealing machine with motorized bar closing and electric pedal

The shoulder is a lean piece of meat trimmed in different cuts which can be steamed, roasted in the oven, boiled or pan fried. The shoulder can be marinated, but it is not recommended for grilling.

Features Extra fine and clear non-turbulent solid stream nozzles with high impact cutting force. Applications Trimming: Paper making Cutting: Timber, food Others: Cleaning of precision machine parts, injection of chemicals, deburring, foaming of beer (jet foamer)

Features Extra fine and clear non-turbulent solid stream nozzles with high impact cutting force. Applications Trimming: Paper making Cutting: Timber, food Others: Cleaning of precision machine parts, injection of chemicals, deburring, foaming of beer (jet foamer)

Features Extra fine and clear non-turbulent solid stream nozzles with high impact cutting force. Applications Trimming: Paper making, asbestos plate Cutting: Timber, food Others: Cleaning of precision machine parts, injection of chemicals, deburring, foaming of beer (jet foamer)

Siempelkamp's continuous saws are a tried-and-tested solution for plants with highest outputs. The saw throughput does not depend on the number of cuts and is therefore superior to other cutting solutions, particularly for large master boards. Continuous saws also permit in-line quality grading. This means that the combined sanding and saw line is able to deliver sorted stacks of nished boards from the master boards in a single stage of work. This allows investment and operating costs to be minimised. The cut-to-size saws may be combined in-line with a sanding machine or set up separately just as a cutting system Features and functions Continuous saws for longitudinal and horizontal cuts Scoring unit and main saw blade for top-quality edges Reliable guiding of the board using chains and/or rollers to ensure accurate cutting Trimming of the edges directly by the tool, no additional conveyors and follow-up work required

The mat trimming saw cuts the precompressed mat precisely to the width required. Two motor-adjustable saws, one each on either side of the belt, cut the bre mat to the dened width. The trimming waste is disintegrated and may be recycled to the production process. Features, function Modular design Motor-adjusted saw blades incl. distance measurement Max. trimming waste of 420 mm on either side Max. mat height ex prepress 360 mm Integrated hogger including extraction stub to remove the trimming waste Extraction stub at the saw blade

We are capable of producing a variety of blades for food processing and slaughtering machines. Offering blades in the best quality stainless steel, we are able to meet stringent requirements put in place by our customers to ensure our blades are food-safe. We recognise a lot of OEM reference codes, but we are also able to reverse engineer our blades from samples, or from your own technical drawing. Applications for these type of blades could include fish slicing, breaking meat, cutting meat, slaughtering animals, trimming meat, skinning fish, slicing meat and processing poultry all the way through the production line.

We are capable of producing a variety of blades for food processing and slaughtering machines. Offering blades in the best quality stainless steel, we are able to meet stringent requirements put in place by our customers to ensure our blades are food-safe. We recognise a lot of OEM reference codes, but we are also able to reverse engineer our blades from samples, or from your own technical drawing. Applications for these type of blades could include fish slicing, breaking meat, cutting meat, slaughtering animals, trimming meat, skinning fish, slicing meat and processing poultry all the way through the production line.

This type of disc knives is especially popular on the equipment of the Italian company Gamma Meccanica SpA. main size is D800/d100, suitable both for cutting plates and for trimming edges. The main advantage of this disc is that no abrasive dust is formed while using it.

Our Sewing Facility in Macclesfield converts both our own fabric into finished garments and fabric supplied from elsewhere. Our products include Ties, Clip on Ties, Cravats, Waistcoats, Scrunchies and Bow-Ties (both pre-tied and self tie), although our highly skilled team can adapt to most requests. We employ approx 30 people and make in the region of 10,000 units each week. ** Click for more **