Crimping - Import export

AMP timer series or commonly used automotive terminals crimping, flry cbles.

for octagonal crimp of 1200mm² und 1400mm² Cu Upper and under parts identical

pressings of hexagonof 6mm² Cu DIN 48083

for hexagonal crimp of Aluminium Steel Cables with Steel tube: 50/8 DIN 48083

for Hexagonal crimp of 16mm² Cu DIN 48083

for hexagonal crimp of 10mm² Cu and Aluminium-Steel Cables with Steel tube: 16/2,5; 25/4; 35/6 DIN 48083

for Oval pressing for double compression cable lugs and H-Clamps 2x50 mm² 35 mm Press width

for hexagonal crimp of 25mm² Cu DIN 48083

for hexagonal crimp of Aluminium Steel Cables with Aluminium tube: 120/20; 150/25 DIN 48083

for hexagonal crimp of Aluminium-Steel Cables with Steel tube: 120/20; 150/25 DIN 48083

for octagonal crimp of 2000mm² Cu | 1800mm² und 2000mm² Al Upper- and under base indentical

This fully automatic crimping machine stands out from the rest for the high daily productivity it achieves through short changeover times and high availability. This thoroughly tried-and-tested machine is also available with a belt drive. That means optimum force transmission and increased output for long and difficult to process conductors. A supplementary unit that is ideal for a broad processing range. The Komax Gamma 333 PC and PC-B are flexible fully automatic crimping machines offering a variety of efficient processing capabilities. Depending on requirements, these machines can apply two-ended crimp contacts and end sleeves for strands, as well as double crimp connections with three different contacts or seals and sleeves to one end of the cable. Tinning and ink-jet marking are two further options. These models can integrate customer-specific applications like MIL crimping, welding or compaction for a further diversification of production.

Consistent high productivity and flexibility with maximum precision are the requirements fully automated wire processing has to meet, both today and in the future. The Alpha 550 – the latest fully automatic wire processing machine for two-sided seal insertion – meets these requirements across the entire spectrum with revo­lutionary technology. The Alpha 550 can yield crucial competitive advantages with its unmatched unit cost performance, flexible production output and superb quality. The machine comes with an ACD automatic conductor detector as a standard feature.

The Alpha 477 fully automatic double crimping machine allows you to process two different wires simultaneously to produce your choice of double crimp or single wires. With four processing stations at the lead termination and two at the trailing end, you have a large number of possible processes at your command. The two wire drives are fitted with highly dynamic AC-servo axes and an integrated anti-slip system. With this sophisticated handling technology, two wires can be fed in parallel and their ends cut to length and terminated in a controlled process. Wires are handled gently throughout. For example, the gripping force exerted on the two wires can be programmed separately and saved for each wire. The two wires are brought together in the double gripper module, where double crimps can be produced either side by side or one above the other.

Top quality processing over a uniquely broad range of cross sections. This fully automatic crimping machine excels in simplicity of operation and flexibility. No matter what the task, from double side crimping to twisting, fluxing and tinning, the Gamma 255 carries it out with compelling process control and minimal changeover times. In spite of its compactness, this device has fully integrated quality-monitoring and feed systems as part of its standard equipment. The Komax Gamma 255 is a flexible fully automatic crimping machine for efficient wire processing. It processes cross sections in a range from 0.0123mm²/AWG36 to 2.5mm²/AWG14 in excellent quality. It is compatible with all commercially available applications. It also handles double side crimped wires as short as 20mm.

With its extra large mounting surface, the Alpha 356 has room for up to seven processing modules. This machine is ideal if you need increased flexibility or have complex processes. Along with the most frequent standard processes of crimping and seal loading, you can obtain a large variety of processing modules such as: fluxing/tinning, twisting the ends of wires, fitting with insulating sleeves and crimping modules for the widest variety of contacts types, ultrasonic or resistance welding modules. You can integrate customer-specific processing stations easily with the ultra-flexible TopWin software.

This fully automatic crimping machine stands out from the rest for the high daily productivity it achieves through short changeover times and high availability. This thoroughly tried-and-tested machine is also available with a belt drive. That means optimum force transmission and increased output for long and difficult to process conductors. A supplementary unit that is ideal for a broad processing range. The Komax Gamma 333 PC and PC-B are flexible fully automatic crimping machines offering a variety of efficient processing capabilities. Depending on requirements, these machines can apply two-ended crimp contacts and end sleeves for strands, as well as double crimp connections with three different contacts or seals and sleeves to one end of the cable. Tinning and ink-jet marking are two further options. These models can integrate customer-specific applications like MIL crimping, welding or compaction for a further diversification of production.

You can mount up to five processing modules on the Alpha 355 S. In spite of its compactness, it offers excellent accessibility. Along with the most frequent standard processes of crimping and seal loading, you can obtain a large variety of processing modules such as: fitting with insulating sleeves, ferrules and ultrasonic or resistance welding modules. You can integrate customer-specific processing stations easily with the ultra-flexible TopWin software.

Solid, reliable technology coupled with innovative solutions ensures and increases your company’s ability to add value. The Alpha 530 – the fully automatic wire processing machine for one and two-sided crimping and seal loading – meets this criteria with solid, powerful technol­ogy. In addition, double crimp, sleeve insertion, ferrule crimping, strand twisting and tinning can be processed efficiently. The fast setup and conversion times of the Alpha 530 contribute to a high level of productivity. The highest quality requirements are met with its high degree of process capability and retrofittable quality options such as ACD and SQC.

Wire Processing to the Most Exacting Standards - Great Versatility Without Conversion. The Alpha 433 fully automatic crimping machine is based on state of the art technology and is designed for processing single conductors as well as double crimp connections. The Alpha 433 models are unsurpassed in their flexibility. Seal loading on one or both wire ends, various terminals and double crimp connections of different lengths and the same wires can be processed without difficulty. Teamed up with Komax MCI peripheral devices, the Alpha 433 is a very compact system offering optimum accessibility and ultra short conversion times.

The Komax Alpha 355 is designed for one and two-sided crimping and seal loading. It even handles double-crimp connections involving varying lengths and the same wire types without any problem. The ultra-precise dual-channel blade system allows for a large range of wire sizes without blade changes.

1.It is suitable for cables with cross-sections of 2.5mm2,4mm2 and 6mm2. 2.It also can be used for riveting lathing pins or stamping pins. 3.Which is for a small quantity of PV cable and terminals.

NSPV solar wire crimping tool Crimping Tool used for solar panel connector installing, crimping solar MC4 connector female male metal pins, perfect connection with solar panel positive negative, convenient hand tool for solar plant, commercial solar project, PV solar system.

Technical Information The pneumatic driven crimper is specifically desig­ned to crimp loose turned contacts. In the range of 0.08 up to 4 mm2 (AWG 28 – 12) wires and contacts can be crimped. A 4/8-indent crimp corresponding to SAE 22520 is standard. The crimping-depth can be adjusted manually in 10 µm steps. The machine is equipped with standard crimping tool kit, the crimper can be easily adapted to various contacts. Brackets for optimized infeed and centering of the wire are optionally available. Options Other crimp form: 4-indent Brackets for optimized infeed and centering of the wire

Technical information Electropneumatic driven, easily adaptable crimpmodule for processing of loose Z+F ferrules integrated in fully automatic machines. In the range of 0.5 to 10 mm² (AWG 20 – 8) wires and ferrules can be crimped. Standard is the trapezoidal crimp corresponding to DIN 46228 part 4. The machine can optionally be adapted to other crimpforms. Adjustments, important data, functions and status will be programed and shown on the touch display. Universal use in the specified range without tool change. I/O interface enables easy integration and time-optimized function in fully automatic systems.

Technical information The electropneumatic driven, easily adaptable crimpmodule is specifically designed to process loose turned contacts and to be integrated in fully automatic machines. In the range of 0.08 up to 2.5 mm2 (AWG 28 – 14) wires and contacts can be crimped. Standard is a 4/8-indent crimp corresponding to MIL 22520. Optionally is it possible to adapt the machine for other crimpforms. The adjustment of the crimping-depth is motoric, 50 different programs can be stored. The machine can be converted for other contacts by using specific tool kits. All tools are easily replaceable. Options Crimp force monitor Other crimp forms: 4-indent, B-Crimp

Technical information The electropneumatic driven, easily adaptable crimper is specific designed to process loose turned contacts. In the range of 0.08 up to 2.5 mm2 (AWG 28 – 14) wires and contacts can be crimped. Standard is a 4/8-indent crimp corresponding to MIL 22520. Optionally is it possible to adapt the machine for other crimpforms. Manual adjustment of the crimping-depth (by option automatically by motor). The machine can be converted for other contacts by using specific tool kits. All tools are easily replaceable. The crimping process is started by a foot switch. Options Z+F crimp force monitor Adjustment of the crimping-depth by a motor Other crimp forms: 4-indent, B-Crimp

Technical information The SC 03 is an electropneumatic crimp press. It is equipped with a very efficient pedal switch. The correct and fully controlled sequence is monitored by a microprocessor control. The machine is started by a foot-switch. An integrated adjusting mechanism enables a correction of the crimping depth. Crimping tools can be changed easily and are available for the processing of ferrules with a size of up to 70 mm² with different crimping lengths. On customers demand special tools with different crimping geometries can be developed and manufactured.

Technical information The SC 05 universal is an electropneumatic benchtop crimper, equipped with a very efficient electropneumatic drive. The machine is operated by a foot-switch. The sequence is monitored by a microprocessor control. With the integrated quadro-crimping-tool, ferrules in the cross-section range from 0.5 mm² up to 6 mm² (AWG 20 - 10) (insulated/uninsulated) and twin ferrules with plastic collar from 2 x 0.5 mm² to 2 x 2.5 mm² (AWG 2 x 20 - 2 x 14) and crimping lengths from 6 mm up to 18 mm can be crimped. The crimper can easily be adapted to different cross-sections by turning the adjustments knob on the front cover of the machine. Other crimping forms or cross-sections are possible on request.