Results for
China
1.It is suitable for cables with cross-sections of 2.5mm2,4mm2 and 6mm2. 2.It also can be used for riveting lathing pins or stamping pins. 3.Which is for a small quantity of PV cable and terminals.
Request for a quoteGermany
Mechanical Crimping Pliers Mechanical Lever Crimping Tools Hydraulic Hand Operated Crimping Tools Hydraulic Battery Driven Crimping Tools Hydraulic Crimping Heads Cordless Multifunction Tool for Crimping and Cutting Copper and Aluminium Cables
Request for a quoteChina
NSPV solar wire crimping tool Crimping Tool used for solar panel connector installing, crimping solar MC4 connector female male metal pins, perfect connection with solar panel positive negative, convenient hand tool for solar plant, commercial solar project, PV solar system.
Request for a quoteGermany
BPP-1303-D18V - battery hydraulic crimping tool, 130 kN, CU400mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 38 mm Battery: 18V/5Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.
Request for a quoteGermany
BPP-1302-D18V - battery hydraulic crimping tool, 130 kN, CU400mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 32 mm Battery: 18V/5Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.
Request for a quoteGermany
BPP-1301-D18V - battery hydraulic crimping tool, 130 kN, CU300mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 26 mm Battery: 18V/5Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.
Request for a quoteGermany
BPE-130-D18V - battery hydraulic crimping tool, 130 kN, CU300mm² for exchangeable dies series "130-C", "22" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.
Request for a quoteGermany
BPL-062-D18V - battery hydraulic crimping tool, 62 kN, CU300mm² for exchangeable dies series "60-CK", "22" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.
Request for a quoteGermany
BPE-062-D18V - battery hydraulic crimping tool, 62 kN, CU300mm² for exchangeable dies series "60-CK", "22" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.
Request for a quoteGermany
BPL-055-D18V - battery hydraulic crimping tool, 55 kN, CU185mm²1 for exchangeable dies series "60-H", "5" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.
Request for a quoteGermany
BPE-055-D18V - battery hydraulic crimping tool, 55 kN, CU185mm² for exchangeable dies series "60-H", "5" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.
Request for a quoteGermany
BPL-035-D18V - battery hydraulic crimping tool, 35 kN, CU150mm²1 for exchangeable dies series "35", "4" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
HP-131-C38 - manual hydraulic crimping tool, 130 kN, CU400mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 38 mm Characteristics turnable crimping head automatic pressure reliefe Manual return is possible in each position working pressure: 700 bar (70 MPa) optional: transport case NEW! HP-131 with mechanical piston protection. ==> Piston will not be demaged by using without dies.
Request for a quoteGermany
HP-131-C32 - manual hydraulic crimping tool, 130 kN, CU400mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 32 mm Characteristics turnable crimping head automatic pressure reliefe Manual return is possible in each position working pressure: 700 bar (70 MPa) optional: transport case NEW! HP-131 with mechanical piston protection. ==> Piston will not be demaged by using without dies.
Request for a quoteGermany
HP-131-C26 - manual hydraulic crimping tool, 130 kN, CU300mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 26 mm Characteristics turnable crimping head automatic pressure reliefe Manual return is possible in each position working pressure: 700 bar (70 MPa) optional: transport case NEW! HP-131 with mechanical piston protection. ==> Piston will not be demaged by using without dies.
Request for a quoteGermany
HP-60-CK - manual hydraulic crimping tool, 62 kN, CU300mm² for exchangeable dies series "60-CK", "22" Two stroke hydraulic system for fast forward Characteristics turnable crimping head automatic pressure reliefe Manual return is possible in each position working pressure: 700 bar (70 MPa) optional: transport case NEW! HP-131 with mechanical piston protection. ==> Piston will not be demaged by using without dies.
Request for a quoteGermany
HP-60-H - manual hydraulic crimping tool, 55kN, CU185mm² for exchangeable dies series "60-H", "5" Two stroke hydraulic system for fast forward Characteristics turnable crimping head automatic pressure reliefe Manual return is possible in each position working pressure: 700 bar (70 MPa) optional: transport case NEW! HP-131 with mechanical piston protection. ==> Piston will not be demaged by using without dies.
Request for a quoteGermany
HP-60-HE - manual hydraulic crimping tool, 55 kN, CU185mm² for exchangeable dies series "60-H", "5" Characteristics turnable crimping head automatic pressure reliefe Manual return is possible in each position working pressure: 700 bar (70 MPa) optional: transport case NEW! HP-131 with mechanical piston protection. ==> Piston will not be demaged by using without dies.
Request for a quoteGermany
HP-35 - manual hydraulic cimping tool, 35 kN, CU150mm² for exchangeable dies series "35", "4" Characteristics turnable crimping head automatic pressure reliefe Manual return is possible in each position working pressure: 700 bar (70 MPa) optional: transport case NEW! HP-131 with mechanical piston protection. ==> Piston will not be demaged by using without dies.
Request for a quoteGermany
This crimper is designed for very high and heavy profiles. Up to 5 set of knifes per corner Heavy duty hydraulic crimer 3,0 KW, 400 V, 50 Hz, Crimping power 100 KN V-stop, crimping tools and V-blocks adjustable Descending counter support – hydraulic lock Bedienung über 2 Fußventile Profilles up to 350 mm height, max crimping height 250 mm Min. frame dimension inside 195 mm 2 vertical hydraulic clamps 2 support arms 4 pair of standard crimping knifes 1 x 3mm, 2 x 5 mm and 1 x 7 mm 3 pieces V-blocks 1x 15 mm und 2x 30 mm
Request for a quoteGermany
Technical Information The pneumatic driven crimper is specifically designed to crimp loose turned contacts. In the range of 0.08 up to 4 mm2 (AWG 28 – 12) wires and contacts can be crimped. A 4/8-indent crimp corresponding to SAE 22520 is standard. The crimping-depth can be adjusted manually in 10 µm steps. The machine is equipped with standard crimping tool kit, the crimper can be easily adapted to various contacts. Brackets for optimized infeed and centering of the wire are optionally available. Options Other crimp form: 4-indent Brackets for optimized infeed and centering of the wire
Request for a quoteGermany
Technical information The SC 03 is an electropneumatic crimp press. It is equipped with a very efficient pedal switch. The correct and fully controlled sequence is monitored by a microprocessor control. The machine is started by a foot-switch. An integrated adjusting mechanism enables a correction of the crimping depth. Crimping tools can be changed easily and are available for the processing of ferrules with a size of up to 70 mm² with different crimping lengths. On customers demand special tools with different crimping geometries can be developed and manufactured.
Request for a quoteGermany
Technical information The SC 05 universal is an electropneumatic benchtop crimper, equipped with a very efficient electropneumatic drive. The machine is operated by a foot-switch. The sequence is monitored by a microprocessor control. With the integrated quadro-crimping-tool, ferrules in the cross-section range from 0.5 mm² up to 6 mm² (AWG 20 - 10) (insulated/uninsulated) and twin ferrules with plastic collar from 2 x 0.5 mm² to 2 x 2.5 mm² (AWG 2 x 20 - 2 x 14) and crimping lengths from 6 mm up to 18 mm can be crimped. The crimper can easily be adapted to different cross-sections by turning the adjustments knob on the front cover of the machine. Other crimping forms or cross-sections are possible on request.
Request for a quoteResults for
Crimping tool - Import exportNumber of results
50 ProductsCompany type