Crane control systems - Import export

The dipping system which is one of the other methods is produced with a robot or crane controlled. The systems are equipped with the most efficient heating, ventilating and PLC control equipment. In our dipping lines manufacturing, AISI 304- AISI 316 stainless sheets of steel and polypropylene are used. The system should be selected according to the shape of the part, the area to be used and the corrosion resistance. Some chemicals which are used for surface cleaning must be applied hot. Due to this situation, our company produces cold dipping lines as well as natural gas heated, electric heated, liquid fuel heated and water heated dipping pre-treatment lines according to the energy source that is planning to be used.

The combination of crane control and wireless control concept creates the link between an operator and a crane and thus makes optimum load handling a tangible experience. Absolutely safe operation of a crane or a system of several cranes must always be guaranteed – safety for the crane operator as well as for the transported goods and surrounding infrastructure. The smart Demag SafeControl system enables independent and continuous monitoring of a crane on the basis of a largely redundant control concept to bring the system to a standstill independently if any irregularities occur. Furthermore, dangerous conditions can be identified and prevented in advance. The crane operator can concentrate fully on his/her work at all times thanks to the safety control system. A crane can be conveniently and intuitively controlled by radio, which is also very efficient. The safety control system combined with radio control can ensure gentle handling and precise positioning of loads.

Cement material supplied with big bags or bags can be transferred into cement silos by means of ELKON Big Bag/Bag Pneumatic Cement Feeding System. ELKON Big Bag/Bag Pneumatic Cement Feeding System consists of cement feeding hopper, intermediary feeding screw, pressure tank, compressor, loading crane and control panel. This feeding system, which has a capacity of 15 tons/hour, is equipped with 2 tons crane to lift the big bags and dispatch into the feeding hopper. The complete set of ELKON Big Bag/Bag Pneumatic Cement Feeding System fits into 1 unit 40’OT container and thus it can be easily transported to overseas countries.

Introducing the KEDY K25000 Aluminium Anodizing Crane: the ultimate solution for handling and transporting aluminum parts during the anodizing process. The K25000 is designed specifically for the unique requirements of anodizing, with a lifting capacity of 4 tons, allowing you to easily handle and transport even the heaviest of aluminum parts. Powering the K25000 is an energy-efficient electric motor, providing the crane with the power it needs to get the job done. The crane's control system is computerized, ensuring that you have full control over the crane's movement and speed at all times. The crane also comes with a remote control option, allowing you to operate the crane from a safe distance. Safety is a top priority at KEDY, and the K25000 is no exception. The crane is equipped with emergency stop buttons, load limiters, and anti-collision systems to ensure that accidents and injuries are prevented. Invest in the KEDY K25000 Aluminium Anodizing Crane now!

Bulk handling of any kind in sea and inland ports or storage facilities. The compact alternative to the MZG type grab for ship-to-ship, ship-to-storage/wagon/silo handling. For various types of crane with control systems designed for hydraulic motor grab systems. Technical design Designed as a discharge and ship unloading grab with retracted pivot bearings for easy grab under the ship’s gangway Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Self-locking grab suspension for crane hooks Grab drive: Horizontal electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Grab shells: Material: S355J2+N Grab connection bearing: re-greaseable, robust steel bushing bearing Small grab dimensions thanks

Handling timber, stacked wood, etc., for downstream industries, in sea and inland ports or at storage facilities. For ship-to-ship, ship-to-storage/wagon/lorry handling. For various types of crane with control systems designed for hydraulic grab systems. Technical design Designed to grip stacked wood, with two interlocking shells to grip one or several logs Optimisation of crane load capacity thanks to its lightweight design which can grip maximum amounts Slim shell design for optimal penetration Wear-resistant cutting edges The hydraulic system’s dimensions, short open and close times and high closing pressure guarantee the quick grab and secure hold of the logs Protected and easily accessible inbuilt electro-hydraulic propulsion motor Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed.

Handling general scrap, car bodies, steel chips, shredder scrap, paving stones and much more, in sea and inland ports or at storage facilities. For pier engineering and riverbed maintenance. For various types of cranes and excavators with internal or external holding cables. For various types of crane with control systems designed for hydraulic motor grab systems. Technical design Open, half-closed or closed grip design Suitable for handling scrap, stones, waste and other difficult to grab goods depending on design Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads, self-locking grab suspension for crane hooks Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Grab connection bearing:

Bulk handling of any kind in sea and inland ports or storage facilities. For ship-to-ship, ship-to-storage/wagon/silo handling. For various types of crane with control systems designed for hydraulic motor grab systems. Technical design Designed as a discharge and ship unloading grab with retracted pivot bearings for easy gripping under the ship’s gangway Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Grab connection bearing: Re-greaseable steel bushing bearing Stable, torsion-resistant design using direct cylinder linkage

Yeniada 4 Colors Flexo printing machine. 7 inches touch control panel , autamic tension control , 4 kW motor with belt drive , manuel printing arrangemenet. Pneumatic printing roller up and down system. Rubber Roller ink transfer system. Compatible with PP , OPP , CPP nylon materials. Compatible with paper printing , paper cup printing process. Durable design , well known brands used as electrical or mechanical components long lasting maintenance . 4+0, 3+1 , 2+2 printing options. 4+4 is avaible with special material turning frame. Dr. Blade Chamber System , All servo drive , edge control system, camera control system and crane or hydraulic lifting system for heavy rollers are options.

The versatile control unit for handling, assembly technology, linear robots The unipos 330 is a universal, modular CNC continuous path control for up to 3 axes (interpolating) in connection with a PLC for controlling most reliable applications for machine construction automation technology, machine tools and special applications. Depending on the design, either stepper motors or servomotors are used as axis drives. The integrated panel PC with the LINUX operating system allows convenient programming of your application and the user interface (HMI). Features Interpolating continuous path control for a maximum of 3 servo axes CNC programming using G code 1 to 3 axes / stepper motors or servomotors Processor: 32-bit microcontroller, 400 MHz, without fan 7" touch screen, resolution: 800 x 480 DPI, TFT colour

Heating systems for frost protection in cold stores and freezer rooms offer a reliable precaution against frost damages and humidity wherever the natural thermal fl ow is not suffi cient for preventing a freezing of humidity in the foundation. For controlling these heating systems, Klöpper Therm developed a new controller offering maximum safety and convenience apart from the approved precise and reliable control. The frost protection controller can easily be confi gured and monitored via web interface. The integrated wake on LAN function enables the booting up of a PC in case of failures (e.g. in a control room) and informs the operating personnel about the type and place of failures.

Our original control systems for technological processes are based on PLC controllers. In the installations designed and manufactured by us, we mainly use subassemblies from market-leading brands such as SIEMENS, Allen-Bradley or EATON. We can implement any controller offered by the manufacturers mentioned above to our systems. Our goal is to constantly develop, expand our knowledge and improve our workshop. In our projects, we strive to communicate the largest possible number of equipment used with one compatible communication protocol, thus avoiding additional electrical connections and gaining an easy possibility to diagnose problems caused in case of a potential failure. In our applications, we use SCADA and HMI systems. Each of them features a huge range of possibilities and allows to adapt particular requirements to specific solutions individually designed for a given client.

The StrongLine operating pillars are aluminum (3 mm thick) welded columns, standard powder coated anthracite (RAL 7016), have a sturdy base plate. The StrongLine pillar is availlable in heights from 1.2 and 1.5 meters for vehicles, 1.8 meters for pedestrians and 2.4 meters for trucks. These operating pillar can be equipped with 1 or more cutouts for mounting hardware modules and feature a door on the backside for accessibility of the components.

An operating column is different for every application, which is why we invested a lot of energy in the design of our SmartLine modular column. The SmartLine operating column consists of anodised corner profiles and aluminium painted side panels. Because an operating column helps determine the look of your service, we offer you the option of personalising your column. The front panel of the operating column is custom-made with specific cut-outs for the installation of your components (displays, readers, scanners, printers, payment terminals, etc.).

Gas turbine control system

We offer you not only turnstile systems, but also software systems. You can monitor your entrance and exit controls thanks to the software we designed with our own engineers.

Three-armed stainless turnstile, one of the most preferred products. It is preferred because it is both affordable and durable.