Covers for welding - Import export

Customized protective covers for each type of gripper (X gripper, Z gripper, etc.). Thanks to the modular design of the protective cover, adaptation is quick and simple with cost savings due to partial replacement of the protective device. Different types of fabrics used for optimal protection of each part of the welding gripper. Highly resistant protective robot covers that are silicone-free, halogen-free, non-flammable, quickly mountable and removable, ideal for welding. Access to the gripper preserved: for maintenance operations, the cover can be removed in a flash. Integrated plastron in the cover: optimized protection on the side exposed to heavy spatter With ASP’s CMC gripper cover, you can protect all your welding grippers with a limited number of low-cost items Robot covers reduce maintenance costs for your robot welding grippers Less downtime for protected robots and longer lifespan.

The very different requirements created by diverse welding techniques mean that specific products have to be specially developed. The industrial fabrics we use have specific coatings that leave the cover flexible but resistant to spatter and weld splashes. Their para-aramid base has excellent mechanical strength. Production tooling protection is a necessity. ASP offers a wide range of protective covers for all types of welding guns, regardless of the welding technology involved (pneumatic, hydraulic or electric motor).

Customized robot protection covers tailored to your needs: Depending on the jet speed and granulometry, the covers can be made of different fabrics (TORCAL B+ or T1A polyamide fabric). The covers provide reliable protection against various surface treatment agents: steel shot, sandblasting, glass beads, steel beads, ceramic beads, etc. High flexibility and abrasion resistance for effective robot protection. Our protective robot covers are made with welded seams to prevent sand or water penetration, which also meant they are waterproof. Sealed rotating joints on different axes for enhanced seal. Balancers installed to keep the cover in position during the robot cycle. The covers are washable and repairable. Specially designed and integrated metal parts on the robot’s surface to provide protection and freedom of rotation for axes 6 and 4.

Our protective covers for foundry/forging/spot welding robots are manufactured with reinforced seams and can be quickly and easily repaired in the event of wear or damage. Ideal protection against moisture, dirt, and lubricants. Thermal protection for the robot: high resistance to extremely high temperatures in forges during the production process (200°C to 600°C, depending on the exposure time). The covers are custom-made according to the equipment fitted on the robot and its trajectories. The fabrics used are fire-rated M1. Resistant to aluminum-brass-magnesium. Oil-repellent. Water-repellent.

Laser cutting welding stainless steel 304 sheet metal cover for machinery parts

Laser cutting welding stainless steel 304 sheet metal cover for machinery parts

A full automatic packaging machine that fills in plastic containers and thermally welds them. It consists of five work stages that start with pulling the empty containers, then packing, then coverings, then welding and taking out. Suitable for medium products, with a production capacity of 1500 packages per hour.

An automatic filling and packaging machine that operates in a circular system to fill liquid or semi-liquid materials with plastic containers of different sizes and shapes on demand. It consists of five work stages that start with pulling the empty containers, then filling them, then placing the covers, then welding and taking out through the conveyor belt. It is suitable for high and medium production with a productivity of 3000 packages per hour.

an automatic filling and packaging machine that operates in a circular system to fill liquid or semi-liquid materials with plastic containers of different sizes and shapes on demand. It consists of five stages of work, starting with pulling the empty containers, then filling them, then placing the aluminum or nylon cover, then welding with cutting and taking out through the conveyor belt. It is suitable for medium production with a productivity of 1500 packages per hour.

The force to be measured must be introduced axially and perpendicularly to the entire surface of the inner and outer bands of the sensor in the opposite direction. Conversion of the acting force into an electrical output signal is performed by strain gages connected together in a full bridge circuit. To achieve optimal accuracy, the base of the sensor should rest on a smooth level surface, hardened to at least ≥ 58 HRC with sufficient dimensions. The base cover welded to the surface has a stabilizing effect on the sensor element. Lateral forces must be avoided anyway as they distort the measured results. Tension and bending relief for the sensor cable is to be carried out on the machine side. FEATURES: — Measuring ranges from 0 ... 100 N to 0 ... 200 kN — Centric throughout hole — Flat disc design — Made of stainless steel — Completely welded sensor body — Nominal characteristic value standardization possible — burster TEDS optionally available

770 Liter Hot Dip Galvanized Waste Container (Dome Lid Model)Body 1.50 mm. It is formed by bending and pressing as a single piece of sheet metal and its strength is increased. Base corners have radius. The assembly of the body sheet and side sheets is made by pressing 20.00 mm on the edges of the side sheets. It is mounted externally to the body sheet with a wide bent protrusion or lip and is completely welded, including the radii, without interruption.The body weld and other welds were welded without slag using the gas arc technique.The body mouth is completely surrounded by a pipe profile.Lift arms and cover connection 2.50 mm. It is welded onto the sheet metal apparatus and screwed onto the body.Lift arms are manufactured in accordance with EN standards. Cover arms 3.00 mm. is.Cover 1.40 mm. It is manufactured from sheet metal as a system that can be opened around its own axis.

2.5mm Galvanized sheet body Electrostatic Powder Painted Covers, Free Standing Modular Cabin, Monoblock Welded Cabin, Stainless Steel Cabinets Panels with high protection class up to IP54 Distribution board Solution with different switchgear brands Engineering support Project-based special design and production Measurement and monitoring solutions Copper busbar transport accessories Cable carrying and marking accessories

Galvanized and powder-coated steel elements. Device permanently founded in the ground, concrete foundations with minimum class: C-25/30. Structural posts protected with welded steel covers; bolts and screws protected with plastic end covers. Screw connections protected against corrosion by galvanizing

Galvanized and powder coated steel elements. The device permanently sited in the ground with concrete min. C-25/30. Structural posts protected with welded steel covers; bolts and screws protected with plastic end covers. Screw connections protected against corrosion by galvanizing.

Ming Xiao Manufacturing Custom Welded parts From all kind of carbon steels,stainless steels,aluminum,copper,Brass. We can produce weled parts from GTAW (Gas Tungsten Arc Weld),SMAW (Shielded Metal Arc Welding), MIG Welding (melt inert-gas welding),TIG Welding(Tungsten Inert Gas Welding) and laser welding for high quality required parts. Our Factory have may spot welding machines,butt welding machines, Argon shielded arc welding machine, Most welded metal parts use spot welding, the spot welding is the fastest way for small welding points, so say its spot welding. its can weld a net metal parts with many spots in consecutive. The welding services are widely use for welded brackets, welded wire frames, welded covers, welded studs on plates. Welcome contact us to discuss your welded metal parts.

Custom-designed clamping systems for pipes, tubes, hoses, cables and other components according to customer`s specifications or based on STAUFF developments, made of thermoplastics, metals and non-ferrous metals. Accessories such as weld plates, cover plates, bolts as well as rubber inserts are available on request.

Custom-designed clamping systems for pipes, tubes, hoses, cables and other components according to customer`s specifications or based on STAUFF developments, made of Polypropylene, Polyamide and other thermoplastics. Accessories such as weld plates, cover plates, bolts as well as rubber inserts are available on request.

CT Model Load Cells The TS model load cell, which is produced from two different materials as stainless steel and alloy steel are produced especially for use in vehicle scales and wagon scales. The measuring zone, which is completely covered by laser welding, is in IP68 protection class, and works successfully in harsh industrial conditions. Specifications Capacity options from 10,000 kg to 50,000 kg Stainless steel / Steel IP68 Protection class High precision OIML, CE Certificated Apps Vehicle Scales Tank-Silo weighing systems