Copper sheets - Import export

Copper Strips are manufactured from highly conductive and thin thickness. They are windly used in automotive industry; radiators, cable industry, electronic and electrical industries; decorative components and Building industry: roofings.etc. Coper Strips are ideally used in applications where the salt content in the soil is very high, with a width of 5mm to 160mm, Thickness of 0,10mm to 10mm. Copper strips are produced, hot and cold rolling , by extruded OF busbars and they are accordıng with TS EN 1652, DIN EN 1652, DIN EN 13599 also EN 13601

We offer wide range of copper sheets that are made with accuracy to suit the client’s specification. We manufacture these copper sheets soft, hard and semi hard optionally for use in electrical industry, Roofing and for other applications.They are produced that Copper fluid is casting to the moulds and follows to the rolling machines, to be Copper sheets. They are according with TS EN 1652, DIN EN 13599. General Properties Material with minimum copper content 99.95%.

hemical Composition: Total concentration of all impurities ≤ 65ppm (typical value ≤ 25ppm). Copper obtained by the difference between 100% and total impurities. ELEMENT SPECIFIED TYPICAL Se < 1.0 ppm < 1.0 ppm Te < 1.0 ppm < 0.5 ppm Bi < 0.5 ppm 0.20 ppm Sb < 1.0 ppm < 1.0 ppm As < 3.0 ppm 1.2 ppm Pb < 1.0 ppm 0.3 ppm Fe < 5.0 ppm 2.8 ppm S < 10.0 ppm 4.5 ppm Ni < 5.0 ppm < 1.0 ppm Sn < 1.0 ppm < 0.5 ppm Ag < 12.0 ppm 8.0 ppm

We offer wide range of copper sheets that are made with accuracy to suit the client’s specification. We manufacture these copper sheets soft, hard and semi hard optionally for use in electrical industry, Roofing and for other applications.They are produced that Copper fluid is casting to the moulds and follows to the rolling machines, to be Copper sheets. They are according with TS EN 1652, DIN EN 13599. General Properties Material with minimum copper content 99.95%. Width : 1000 mm Length : 2000 mm Thickness : 0.40 mm to 4 mm

We provide laser cutting services for stainless steel or aluminium sheets and pipes. High precision and fast execution are ensured by high-performance equipment and the experience of the Profinox team! Our laser cutting services have a number of benefits: Versatility – the tool can be used for a wide range of materials, with Profinox providing laser cutting services for stainless steel, aluminium or copper sheets and pipes; The power used for the laser metal cutting process is lower; The laser cutting procedure involves minimal deformation; Low costs for laser cutting; No contact between the part and the tool; Enhanced surface quality; Minimal burrs: this advantage provided by the laser metal cutting process also eliminates the need for further machining; Possibility to create and obtain complex shapes. Furthermore, the laser cutting process is silent and fast, ensuring a high precision of +/- 0.1 mm. If you have materials exceeding the maximum

Product Name: Brass Strips Coil Foil for Decoration Application: Electronic, telecommunications Width: 3mm-1220mm Material: Brass Grade: Brass Coil Cu (Min): 64.0-68.0% Model Number: C2680,C2680,C2700.etc. Place of Origin:  China Processing Service: Bending, Welding, Decoiling, Cutting, Punching Shape: Strip Coil Roll Temper: O, 1/4H, 1/2H, 3/4H, H, EH, SH Alloy brand: C2680, C2600, etc Standard: JIS ASTM DIN EN ISO Surface: Mill,Polish,Bright,Hair line,Brushed,etc. Package Type: Standard export seaworthy package,or as required. Payment term: T/T,L/C etc. Port of shipment:Xiamen,China Lead time:15-30days

0.5mm-8.00mm

width 100mm thick 0.02mm

Grade: 1000-8000Series Temper: O-H112 Type: Plate, Aluminum circle Application: Reflective Sign Boards Width: 70mm~1600mm Surface Treatment: Coated Place of Origin: China Model Number: 1050,1060,1100,3003 7075 Alloy grade: 1000-8000series Thickness: 0.5mm-8.00mm Certification: ISO9001 SGS Standard: GB / T3880 ASTM B209 Supply Ability: 5000 Ton/Tons per Month Packaging Details: standard export packing Lead time:15-30days Port of shipment: Xiamen Payment term:T/T,L/C etc.

we process thin sheets, heavy plate, wear-resistant sheet and plate. aluminium sheets, stainless steel sheets, copper sheets, brass sheets and much more, with formates from 3000 to 8000 mm (118" to 315"), with thickness 1 mm – 180 mm (0,039" to 7") welded sheet metal structures, aluminium constructions, industrial profiles

DPC (Direct Plated Copper) Mainly by evaporation,magnetron sputtering and other surface deposition process to carry on the substrate surface metallization,first under the condition of vacuum sputtering,titanium,and then is copper particles,the plating thickness,then finish making line with ordinary PCB craft,and then to plating/electroless deposition way to increase the thickness of the line, the preparation of DPC way contains vacuum coating,wet deposition,Exposure development, etching and other processes. Advantages: >In terms of shape processing, DPC ceramic plate needs to be cut by laser, the traditional drilling and milling machine and punch machine can not be accurately processed, so the combination force and line width is also more fine. >The crystal performance of the metal is good >The flatness is good >The line is not easy to fall off >The line position is more accurate,the line distance is smaller, reliable and stable, can be through the hole and other advantages.

DBC ceramic substrate: Direct bonded copper (DBC) substrates are commonly used in power modules, because of their very good thermal conductivity. They are composed of a ceramic tile (commonly alumina) with a sheet of copper bonded to one or both sides by a high-temperature oxidation process (the copper and substrate are heated to a carefully controlled temperature in an atmosphere of nitrogen containing about 30 ppm of oxygen; under these conditions, a copper-oxygen eutectic forms which bonds successfully both to copper and the oxides used as substrates). The top copper layer can be preformed prior to firing or chemically etched using printed circuit board technology to form an electrical circuit, while the bottom copper layer is usually kept plain. The substrate is attached to a heat spreader by soldering the bottom copper layer to it. 1. Thickness of substrate can be thin: 0.25mm,0.28mm,0.45mm,0.5mm,0.635mm,1.0mm,1.5mm, 1.8mm,2.0mm 2.

The metal stamping service can be customized during the whole manufacturing process from the mold developing, designing to producing. Every demand from customers like metal stamping, punching, deep pumping and specific angle bending are measured and tested according to the measurement of metal materials then apply to each kind of metal. Features of our products: 1. Material: Steel, Stainless steel, Aluminum sheet, Copper etc. 2. Surface treatment: Zinc plated, Powder coating, Paint, Nickel plated etc. 3. Requirement: based on drawing and quantity. 4. Stamping equipment: 10-500T 5. Packing: we will offer you the standard package which includes plastic film, foam, carton and wooden box which is suitable for transporting 6. Delivery time: Within 20 days after receiving your 30% deposit

Allow us to briefly introduce ourselves and at the same time offer the services of our company. we precisely manufacture sheet metal parts, cabinets, covers and control cabinets made of steel, aluminum or copper sheet up to a thickness of 3 mm we treat the surface with powder paints, galvanizing we describe the screen printing method we weld or press bolts, nuts, screws onto sheet metal we have exact connector tools for 100% visual quality we make various moldings, signs (e.g. grounding) or bridges for attaching cables assembly, pre-assembly, packaging we have our own trucking company TIG, MAG and laser beam welding - we produce in small and large series

We offer a wide range of rods, which are used for electroplating, switchgear, ship building and power generating equipment, as they are high-conductivity. On the other hand, they are widely used as radiator in electrical product, as its high- thermal conduction. They are produced that copper fluid is casting to the billet moulds and follows to the extrusion press, after that annealed rods are drawn, to be copper rods, 2000 mm to 6000 mm length, 10 mm to 175 mm diameter and they are according with TSE 435, DIN EN 12163 and DIN EN 13601. General properties material with minimum copper content 99.95%

Copper Strips are manufactured from highly conductive and thin thickness. they offer great resistance to corrosion.They are widly used in automotive industry; radiators, cable industry, electronic and electrical inustries; decorative components and Building inustry: roofings.etc. Coper Strips are ideally used in applications where the salt content in the soil is very high, with a width of 10mm to 160mm, Thickness of 0,20mm to 6mm. Copper strips are produced, hot and cold rolling , by extruded busbars and they are accordıng with TS EN 1652, DIN EN 1652, DIN EN 13599

All size NAB castings for Valves. Total capacity of 15 To enables to accomodate almost any aluminium bronze project

The Phoenix fiber laser cutting machine is an all-around performer. It has the flexibility to expertly cut standard steels and non-ferrous materials in a range of thicknesses and combines high machine dynamics, intuitive machine operation, and advanced automation options to maximize productivity no matter the application. The inherent benefits of fiber laser technology make Phoenix cost effective to maintain and operate. KEY FEATURES Processes ferrous and non-ferrous materials, including copper and brass Processes different sheet thicknesses without manual intervention Advanced cutting head handles thicker materials “On the fly” cutting in light gauge material Integrated Siemens CNC control and drive system offers high reliability TOUCH-L touch screen graphical user interface control is intuitive and simple to use Automatic shuttle table maximizes uptime PERFORMANCE-ENHANCING OPTIONS CADMAN-L programming software MOVit Automation: TAS, WAS, Compact Tower

Copper sheets and plates

Sheet metal bending The two key words when it comes to sheet metal bending are accuracy and quality. FoxLaser guarantees both, thanks to the latest generation of digital, hydraulic press brakes from the Japanese company AMADA. The 7-axis control allows for a very fast process in the production of test parts and prototypes of bent sheet metal, as well as perfect repeatability of the bends in long series. FoxLaser owns nine press brakes for bending, three of which of a brand-new generation, with the option of external programming. Combined with AMADA's specialized BendCam software, they speed up and improve the prototyping process immensely. We are proud owners of a large-sized press brake machine, which allows bending of sheet metal parts up to 4000 mm and also one with a capacity of 320 t by 3000 mm. Additionally, we have manual sheet metal bending machines, press brakes and three-shaft rounds (for cylindrical and conical molding).

Any device is only as reliable as the sum of its components. With more than fifteen years of experience in manufacturing tuned and detuned filter reactors for power factor correction, we are now offering our range of line reactors for application in power electronics. Same as with our capacitors, we focus on minimized power losses and maximum durability of the reactor – optimized for your application. Made of high-class transformer sheets and copper wire or aluminium band. Vacuum-impregnated with environmentally friendly, low-styrole resin for long operating life, high voltage strength and low noise levels. Standard terminals: copper terminal lugs, optional with screw-terminal blocks or cables. Integrated reversible thermal switch for monitoring of the reactor and control of external disconnection in case of overheating. Our standard range covers 400V 50Hz up to 300A per phase. Other values are available on request.

SURVOS products are optimally suited to sheet metal forming, machining and assembly technology. Our SURVOS has also been successfully used in cutting and punching aluminium sheets, steel sheets, copper and brass sheets, in cold profiling, bending, embossing, sawing and drilling aluminium profiles for decades. SURVOS detaches from a workpiece with 100% residue-free evaporation even when the parts lie flat on top of each other. Only selected raw materials of the highest purity are used for SURVOS. One of the main components is dearomatized hydrocarbons of the highest quality. As a metal processing medium that evaporates residue-free, SURVOS combines optimum lubricity with favourable values for evaporation speed, toxicology and environmental protection. All SURVOS products are classified according to REACH (EC 1907/ 2006) and do not contain any substance that is on the list of candidates for SOVHC.

SURVOS products are optimally suited to sheet metal forming, machining and assembly technology. Our SURVOS has also been successfully used in cutting and punching aluminium sheets, steel sheets, copper and brass sheets, in cold profiling, bending, embossing, sawing and drilling aluminium profiles for decades. SURVOS Plus L meets the strict food law requirements of the FDA US regulations in acc. with 21 CFR 178.3620(b) and 178.3120. SURVOS Plus has a high lubricity and quickly evaporates 100%.* * According to the specifications of the DAB (German Pharmacopoeia), an evaporation residue of < 0.01% is considered to be residue-free. The evaporation residue of SURVOS Plus L is 0.0045% or 45 ppm.

SURVOS products are optimally suited to sheet metal forming, machining and assembly technology. Our SURVOS has also been successfully used in cutting and punching aluminium sheets, steel sheets, copper and brass sheets, in cold profiling, bending, embossing, sawing and drilling aluminium profiles for decades. SURVOS – 100% residue-free* evaporating metal processing oil. SURVOS Rapid D evaporates considerably faster than the "Standard" formulation (with a somewhat lower lubricity). SURVOS Rapid D impresses, however, with short evaporation times and is 100% residue-free*. The fluid is used in particular when operations follow each other in a short cycle sequence and no residue is allowed to remain. * According to the specifications of the DAB (German Pharmacopoeia), an evaporation residue of < 0.01% is considered to be residue-free.

Our high-performance machining oil SENTOS V-LR3 has a somewhat higher lubricity compared to our SURVOS products. This product also consists of volatile components that evaporate down to a lubrication residue of 3%. All components are approved according to USA-FDA §178.3910 as surface residues for the manufacture of food packaging. This makes our SENTOS optimally suited as a lubricant and drawing agent for punching and deep drawing (even with high contact pressures), for cutting and perforation of sheets (aluminium, steel, copper, brass, zinc-plated), including transformer and electric sheets, as well as for painted and coated sheets in particular. In addition, our SENTOS is especially well suited for cold profiling, bending and embossing, as a cooling lubricant for sawing, drilling, milling and engraving as well as a lubricant for cutting non-metallic materials.

The 20 kHz roll seam welding heads with up to 3KW power are particularly suitable for continuous welding of pipes, solar absorbers, or copper sheets. Thanks to the discshaped sonotrode, ultrasonic roll seams provide continuous welds without seam interruption.

Cutting of steel, dkp, stainless, aluminum, copper, brass and galvanized sheets are performed with plasma cutting machine. Our machines can perform plasma cutting from 1 mm to 35 mm. As Ramazan Aycan Inc., we provide plasma cutting services to cut sheet in desired sizes and thicknesses according to the demands of our customers; we provide you with guaranteed services with our expert staff.

Precision cutting of steel, dkp, stainless, aluminum, copper, brass and galvanized sheets are performed with laser cutting machine. As Ramazan Aycan Inc., we provide laser cutting services to cut sheet materials in desired sizes and thicknesses according to the demands of our customers. The ytterbium laser to be used for sheet metal cutting is produced in the laser unit. The rays produced in the modules of the laser unit can be easily carried by fiber cable to the cutting head without any loss. In this way, suitable laser beams are provided for sheet metal cutting.