Results for
ORBITEC GMBH
Germany
Gas-cooled weld head for applications with extreme narrow space requirements as e.g. in the semiconductor industry. Specially designed to weld micro-fittings. Unique construction, including specifically directed gas routing to improve gas coverage and material selection resulting in a high duty cycle even without water cooling. — Extreme narrow / compact design — Simple design allows easy to maintain — Weld Head compatible with control element (start/stop kit with status display) — Arc Machines Model 9-500 cassettes will fit too
Request for a quoteORBITEC GMBH
Germany
Our latest series of 3 gas-cooled weld heads technical optimized and in an new design covers the tube size ranges from 6mm – 114.3mm / 0.250” - 4.500”. Unique construction and material selection allows a high duty cycle even without water cooling. The weld heads are one of the narrowest on the market and have a ‘quick latch’ system for retaining the collets. For the high duty cycle applications we also offer the gas-cooled S series weld heads in a water-cooled SW-version (the overall width remains unchanged). Full water-cooling of the lower clamp housing. Also available as an upgrade for standard OSK S weld heads. Weld head type \ Field of application mm \ inch \ weight OSK 53 S + SW \ OD 6 - 53mm \ 0.250" - 2.087" \ 2.1kg OSK 76 S + SW \ OD 6 - 76.2mm \ 0.250" - 3.000" \ 2.6kg OSK 115 S + SW \ OD 9.53 - 114.3mm \ 0.375" - 4.500" \ 3.4kg OSK 170 GW \ OD 50 - 168.3mm \ 1.969" - 6.626" \ 7.5kg
Request for a quoteORBITEC GMBH
Germany
Our latest series of gas-cooled and compact weld heads. They are for smaller outside diameters with a narrow handle for tighter access conditions. Weld head type \ Field of application mm \ inch \ weight OSK 21 CS \ OD 3.17 - 21.3mm \ 0.125" - 0.839" \ 0.8kg OSK 38 CS \ OD 3.17 - 38.1mm \ 0.125" - 1.500" \ 1.2kg —-- Our new generation of compact weld heads for high duty cycle requirements have watercooled clamp housings and clamping levers. Both OSK CW weld heads are operated using a sharable handle and cable assembly. Weld head type \ Field of application mm \ inch \ weight OSK 21 CW \ OD 3.17 - 21.3mm \ 0.125" - 0.839" \ 1.0kg OSK 38 CW \ OD 3.17 - 38.1mm \ 0.125" - 1.500" \ 1.4kg Only one drive unit is needed for all C and CW weld heads. —-- OSK 21 CB gas-cooled weld head with clamping block for tube-totube connectons incl. setting gauge for pipe Weld head type \ Field of application mm \ inch \ weight OSK21 CB \ OD 3.17 - 21.3mm \ 0.125" - 0.839" \ 1.0kg
Request for a quotePAWONEX
Poland
Refined appearance and very high utility values. This is how Giorgio's hat can be summed up in a nutshell. The pompom on the hat makes it girlish and is one of the most important motivators to buy this model. Other important advantages of this winter hat are the material from which the hat was made - mohair yarn. This is the best guarantee that even during the deepest frosts we will not be bothered by the cold. Hat with a raccoon pom-pom The secrets of the presented women's hat do not end there. Returning to her characteristic pompom, it should be noted that it was made of natural raccoon dog. The use of a high cuff in the hat makes it fit perfectly around the entire head circumference, leaving no empty spaces through which the cold could penetrate under the hat and cool the head. The upper part of the hat is smooth, which allows you to combine this hat model with virtually any type of winter clothes.
Request for a quoteFESSMANN GMBH UND CO KG
Germany
The IKi3000 will always keep a cool head where efficiency and quality of your products are concerned. The cooling time reduction by up to 75% not only saves time and energy but also permits fastest passage through the critical temperature range for germ growth. It's a real improvement in hygiene and durability! Cooling times reduced by up to 75% Longer durability thanks to fastest passage through the critical temperature range for germ growth Less weight loss Less water consumption Additional steam cooking possible Optionally available with brine circuit Maximum flexibility thanks to construction kit system For processes with justintime production
Request for a quoteXIAN HUAN-TAI TECHNOLOGY & DEVELOPMENT CO., LTD.
China
design and manufacture high efficiency aluminum dross recycling equipment for many years, we work with famous American experts in aluminum industry, our main products are dross press, dross pan, cooling head and so on. We have sold our products to NANSHAN, ALBA, ALCOA,DUBAL, HYDRO, KAISER, QATALUM, RUSAL and other famous aluminum companies in the world, our products have obtained high praise from our customers. With unique design, our dross compression unit can cool down the hot dross rapidly, the oxidation and metal loss will be terminated in a very short time. In-house metal recovery could be 30-50%, much higher than any other solutions. We can customize dross press in different types based on your need and your dross amount.
Request for a quoteXIAN HUAN-TAI TECHNOLOGY & DEVELOPMENT CO., LTD.
China
Skim Pan, Skim Pots, Sow Molds, Dross Pan, Slag Pan, Cooling Head, Slag Crucible for Aluminum Recycling Unit Made of a patented material which is developed by our own, our skim pots and sow molds have a very durable quality. We innovatively re-design the skim pots and sow molds to make them have a very fast cooling speed, which results in a remarkable reduction of oxidation. In addition to our patented material, we can provide the options for materials to fit in different applications of customers. As shown in the sow mold tables below, we have many sizes of Skim pots and sow molds already available, they could cover many applications, and no pattern costs needed for them.
Request for a quoteXIAN HUAN-TAI TECHNOLOGY & DEVELOPMENT CO., LTD.
China
design and manufacture high efficiency aluminum dross recycling equipment for many years, we work with famous American experts in aluminum industry, our main products are dross press, dross pan, cooling head and so on. We have sold our products to NANSHAN, ALBA, ALCOA,DUBAL, HYDRO, KAISER, QATALUM, RUSAL and other famous aluminum companies in the world, our products have obtained high praise from our customers. With unique design, our dross compression unit can cool down the hot dross rapidly, the oxidation and metal loss will be terminated in a very short time. In-house metal recovery could be 30-50%, much higher than any other solutions. We can customize dross press in different types based on your need and your dross amount.
Request for a quoteXIAN HUAN-TAI TECHNOLOGY & DEVELOPMENT CO., LTD.
China
Xian Huan-Tai was founded in 1995. We are an ISO 9001 certificated company. We have been providing various models of sow molds to aluminum smelters in America, Australia,Canada, Germany, India, Italy and South Africa for nearly 3 decades. We gradually expanding our product line from sow molds to other castings used in aluminum recycling system, including dross pans, cooling heads, skim tools and other iron and steel castings. Responding to the customer demand, since 2010, we started to design and build dross press and other devices needed for aluminum recycling system, providing solutions for customers to maximize their aluminum recovery rates.
Request for a quoteORBITEC GMBH
Germany
The RBK 60 S is an extremely robust water-cooled weld head for a standard heat exchanger application up to an ID of 60 mm, modified to an ID of 99 mm or 120 mm. The head is pneumatically centred and is available with a rotating wire device and/ or arc voltage control (AVC) as an option. The head can also be used with a pneumatic positioner instead of a balancer. Versions: — RBK 60 S weld head with pneumatic centring, including hose package, 8m, water-cooled — RBK 60 S weld head with pneumatic centring and wire feeder incl. hose package, 8m, water-cooled — RBK 60 S weld head with pneumatic centring, wire feeder and AVC incl. hose package, 8m, water-cooled Package includes: — Weld head — Small torch incl. torch consumables and tungsten electrode Ø 2.4 mm — Water-cooled hose package, 8 m — Pull bar B — Transport case Optional: — Div. spring sleeves and pull bar sets for RBK 60 S — Torches, Balancer, Tube-to-tubesheet positioner...
Request for a quoteORBITEC GMBH
Germany
With tube-to-tubesheet weld heads, it is possible to achieve consistently high-quality, reproducible welding of tubes to tubesheets, with or without additional wire. The tubes to be welded can be flush with the tubesheet, offset, protruding or behind the tubesheet. The RBK 38 S and the RBK 60 S are our two new tube-to-tubesheet weld heads. The RBK 38 S is a small, handy water-cooled head for welding tubes to tubesheets up to an ID of 36.7 mm, without additional wire. Package includes: — Weld head — Water-cooled hose package, 6 m — Pull bar B — Gas hood ID 35 mm — 0° electrode holder — Transport case Optional: — Div. electrode holders for RBK 38 S — Div. gas hoods for RBK 38 S — Div. spring sleeves and pull bar sets for RBK 38 S
Request for a quoteOPTREL AG
Switzerland
Respiratory protection system with integrated air flow sensor and 3 level air flow adjustment. With the new PAPR system e3000X optrel guarantees: — Highest level protection (TH3) from smoke, aerosols and dust). The breathing air gets up to 500 times cleaner — Evenly distributed air inside the PAPR helmet without eye irritation — Automatic air flow control — Automatic air flow calibration — Additional cooling effect for the fore head Better work conditions for more efficiency, comfort and performance.
Request for a quoteMORMED GROUP
Turkey
We have crowned our creative production understanding and innovative approach based on innovation with Magic PRO. We offer more functional use with its portable design. It provides fast, efficient and comfortable photo hair removal with 6001200nm wavelength range. With special square pulse technology, you can achieve an effective result by channeling the energy at the right proportion to the hair root within milliseconds. With a special cooling head with 5cm² application area feel to a minimum, you can do a lot faster and more comfortable application.
Request for a quoteMEDEK & SCHÖRNER GMBH
Austria
Indent marking or embossing of cables up to 30 mm in diameter immediately after the extruder head. Indent marking or embossing Single or double-sided marking Line speeds up to 1000 m/min STANDARD CONFIGURATION Frame with support column and crank-operated height adjustment mechanism. Marking head with cooling trough. Marking wheels and guide rollers available separately.Marking machine for insulated cables. Indent marking or embossing. Single or double-sided marking. Marking wheels mounted on water-cooled shafts to prevent insulation from sticking to marking wheels and ensure perfect marking at extrusion line speeds of up to approx. 1000 m/ minute. Height of each marking wheel adjustable separately. SPECIFICATIONS Max. printing speed: 1000 m/min Product diameter: 1.5 mm to 30 mm Marking wheels: 86 mm in diameter ACCESSORIES Marking wheels Pressure rolls
Request for a quoteHERBERT WALDMANN GMBH & CO. KG
Germany
Where most lights often fail, ONE LED shows its true capabilities: restricted space and high temperatures – in some machines, you are faced with both of these problems. Thanks to its minimalist, but very robust construction, ONE LED even withstands very high temperatures, although its high-power LED display an enormous lighting power. • Maintenance-free LED technology • Strong high-power LED for maximum light • Robust die-cast housing with solid safety glass or plastic screen • High degree of protection • Ideal for high thermal stress • Quick and precise positioning • Direct connection to machine voltage • Connection via M12 plug connector or quick connector • Luminaires for daisy chaining
Request for a quoteHERBERT WALDMANN GMBH & CO. KG
Germany
The pivoting-head luminaire ROCIA.focus offers maximum flexibility. The mobility of its pivoting head allows the light beam to be directed precisely to where it is needed. The extremely precise lighting allows focused and concentrated work – also thanks to different beam angles. • Maintenance-free LED technology • Strong high-power LEDs for maximum light • With narrow- or wide-beam illumination characteristic, as desired • Robust aluminium housing with solid safety glass screen • Viton® seal for high degree of protection • Chemically resistant to many media such as oils or cooling lubricants • Exactly adjustable pivoting head • Direct connection to machine voltage
Request for a quoteLOOMKNITS (IE NOVIKOV D.V)
Russia
Ribbed beanie hat made of high quality 100% certified cotton OEKOTech 100. This material without harmful dyes and chemicals makes the product absolutely safe for your baby. The main upper part of the cap is a plain smooth texture, the bottom is made with a twotone rib. A ribbed beanie hat will keep your baby's head warm in cool weather and is the perfect complement to any Loom outfit
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
LOOMKNITS (IE NOVIKOV D.V)
Russia
Ribbed beanie hat made of high quality 100% certified cotton OEKOTech 100. This material without harmful dyes and chemicals makes the product absolutely safe for your baby. The main upper part of the cap is a plain smooth texture, the bottom is made with a twotone rib. A ribbed beanie hat will keep your baby's head warm in cool weather and is the perfect complement to any Loom outfit
Request for a quoteROTAKEM
Turkey
Technical specifications : 1. Origin: Russia 2. Renovation year: 2020 3. roll diameter: 660 mm 4. Roller length: 1500 mm 5. Front roll liner speed: 15 rpm 6. speed ratio of rolls: 1: 1,15 7. Roller opening range: 1-30 mm 8. Motor power: 160 kW 9. Engine-transmission transmission type: belt / pulley system 10. Transmission type between gearbox shaft: Direct coupling 11. Bearings: Ball Bearing 12. Lubrication: Automatic 13. Cooling system: Central cooled with water head 14. Visor: Fixed 15. Safety: - 4 emergency stop buttons - 2 emergency stop bars - 2 emergency stop pedals - Return - Engine brake 16. New chassis 17. Shafts ground 18. New electrical and control panel 19. Optional: - Stock blender - Automatic on / off - Motor drive
Request for a quoteTESLA ENGINEERING LTD - GRADIENT DIVISION
United Kingdom
The use of a head gradient coil insert together with a whole body gradient coil allows for higher gradient strength and potentially higher stimulation limits. The use of a head gradient coil insert can result in higher resolution imaging, in particular of the inner ear. (Head gradients are used in combination with Whole body gradients within MRI systems for superior imaging). Important factors in head gradient coil design are: - Design of the head gradient coil insert's magnetic field to match the whole body gradient's magnetic field, - Robust, durable and rigid construction to maintain a fixed position within the whole body magnetic field, - Efficient cooling of the head gradient. ** Click for more **
Request for a quoteResults for
Cooling head - Import exportNumber of results
21 ProductsCountries
Company type
Category