Results for
ELECTROALFA
Romania
Custom made, sheet metal control desk/console
Request for a quoteMEDEK & SCHÖRNER GMBH
Austria
The cable marker KS 42 C-FM is a high-performance marker specifically designed for high-speed gravure printing on hot plastic insulated wires and plastic jacketed cables in user selectable colors. Due to the extremely high precision of the machine’s drive system, the KS 42 C-FM ensures a non-slip operation and a reduction of the strain on the soft cable insulation to a minimum. Marking of text and numbers Single printing head Quick change of legend Print wheel drive up to and above 1200 m/min Exchangeable ink supply system Rugged, virtually maintenance-free AC drive. Incremental tachometer and reference sensor mounted on the printing disc shaft provide exceptionally accurate synchronization. Automatically synchronized stroboscope of extremely high light efficiency allows proper inspection even at slow marking speeds. Electronically synchronized printing disc drive. Integrated control electronics.
Request for a quoteELECTRO MAX
Romania
The console is powered from 230 V AC. Must be connected with a shielded cable to the controller. You can see the current status of the lighting circuits, change the brightness, check the failures, see the total consumption.
Request for a quoteCHATRON
Portugal
The Wall Flat models allow a perfect installation of the Chatron Solar lIGHT Tube on facades of buildings, with the dome and diffuser inlaid without any kind of protrusions. These models also have the possibility of integration of LEDin system, allowing efficient lighting 24/h day. During daytime periods and with sun the lighting of the space is all coming from the sun. With the cloudy days or approaching the night, the “Light Controller” console introduces power to the LEDs, in order to keep constant the desired and selected Lux level for that location.
Request for a quoteCHATRON
Portugal
What is LEDin? It is the integration of Led lighting in solar tubes, allowing efficient lighting 24 hours a day. During daylight and sunny periods the illumination of the space comes from the sun. As night approaches or the day gets darker, Chatron’s “Light Controller” console introduces power to the LEDs to keep the desired and selected Lux level constant for that location. MAXIMIZATION OF THE UTILIZATION OF NATURAL LIGHT + OPTIMIZATION OF EFFICIENCY IN LED LIGHTING During the day, SUN PIPE – SUN TUNNEL -SOLAR LIGHT TUBE transport the natural light into the interior of spaces, keeping the environment with the quality that only Chatron SUN PIPE – SUN TUNNEL -SOLAR LIGHT TUBE can accomplish. To achieve light during night periods or during cloudy periods, LED-IN Chatron system allows for each SUN PIPE – SUN TUNNEL -SOLAR LIGHT TUBE model to light spaces with the adequate power. Available options: Standard (On-Off) or Dimmable version are available.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
EDIT ELEKTRONIK SIST SAN VE TIC LTD STI
Turkey
General purpose external and internal type welded cabinets, Galvanized sheet body up to 3 mm Body reinforced with special twists High Protection class up to IP66 Strong structure produced with the latest welding technologies Epoxy-Polyester Powder Coating, Primer Painting for External Type applications, Zinc coating solutions against corrosion and oxidation PEM Driven Screw-Nut Applications Flexible cabling and Bus-Bar solutions Low voltage distribution panels in standard sizes, Wall-mounted distribution boxes External Type Device Boxes Machine control consoles Transformer Cabinets Project-based production in special sizes
Request for a quoteMEDEK & SCHÖRNER GMBH
Austria
Gravure printing machine for marking opposite sides of hot plastic insulated cables Dual head printer Marking of text and numbers Medium speed Exchangeable ink supply system STANDARD CONFIGURATION Frame with support column and height adjustment crank mechanism. Marking unit with synchronized, phase-adjustable drive for two facing printing discs. Integrated control electronics and built-in control console. 1 set of dedicated ink wipers and guide rollers matching the specified printing discs. Replaceable, compact ink supply module with ink tank, pump, cooler, filters, and ink flow fine adjustment valve. Complete tacho adjustment unit. Complete accessories kit without printing discs. Electronically synchronized printing disc drive. Mechanical phase control for staggered marking. Replaceable ink supply module for quick color change within about 2 minutes. Optional second ink supply module allows even faster color change.
Request for a quoteELECTRO MAX
Romania
The controller has a number of maximum 8 output independent circuits. These circuits can be configured in the factory on different outputs: 230 VAC for floodlight projectors for example or the wind direction indicators 48 VDC, used usually on heliports for INSET or ELEVATED lights and GUIDANCE systems. These lights are dimmable in three steps, 10, 30, and 100%. 1.4 A DC, constant current serial circuits, used usually on Airports where the circuits of lights are on long-distance and we don’t want to have a big drop of voltage and power on the cables. This type of circuit can be used even on heliports where the controller is far from the heliport. Heliport beacon output, special for heliport beacons. When a heliport beacon is present in a system, we add inside the controller a module for flashing sequence. On this output, the brightness is 3%, 10%, and 100%. This controller has different control options: From the front door buttons Remote control using a console connected with a cable
Request for a quoteALPHA LASER GMBH
Germany
This stable work table can be used with laser sources from 300 - 900 W, which are integrated in the work table. The modular design allows the use of various optics and focal lengths, so that you can optimally carry out your tasks. The system can be operated either manually - with our instantly responding joystick - and semi-automatically or automatically with the WINLaserNC software. When welding, workpieces are moved precisely on the three axes of movement of the work table. An axis of rotation is also available. The Z axis of the table lifts workpieces up to 450 kg. The laser and motion system are conveniently operated via the control console with an intuitive touchscreen. With the AL-TW you can weld without restricting the work area. This enables the processing of large workpieces. We support you with the implementation of the laser safety measures with our laser safety concept.
Request for a quoteNORIS GROUP GMBH
Germany
NORISTAR 4 - The flexible remote control system for all propulsion drives The NORISTAR 4 is our powerful remote control system (RCS) for all types of ship, whether tugboats, cargo ships, passenger ships or super yachts. It is based on our NORISYS 4 open automation platform and is suitable for all propulsion drives. The system can be configured for multiple control consoles and offers many useful functions, such as load distribution, preprogrammed control programs, "electric shaft" function, start/stop logic, DP and joystick function. Configuration and monitoring are performed in a simple and user-friendly way via an integrated touchscreen display. Optional web access makes service easier and facilitates remote maintenance and the transfer of data to fleet management.
Request for a quoteResults for
Control consoles - Import exportNumber of results
12 ProductsCompany type