Results for
BURRE HYDRAULIK GMBH
Germany
6-way construction With leakage control Media: hydraulic (flow line/return line), cooling liquid (flow line/return line), natural gas, oxygen
Request for a quoteBEHRINGER GMBH MASCHINENFABRIK UND EISENGIESSEREI
Germany
The longitudinal plate saw LPS-T from BEHRINGER is a true specialist in its field. It is particularly suited for sawing small, compact parts and short offcuts of the kind required in toolmaking shops. The LPS-T also makes fast, neat work of test cuts and notching operations in materials with difficult machining properties. Making all this possible is a traversable table which allows the rapid positioning, alignment and clamping of workpieces. The material table is fitted with T-slots over its entire length, allowing even awkwardly shaped workpieces to be securely held in place by the flexible use of clamping fixtures. The LPS-T is able to cut even materials with different machining properties with the utmost precision without compromising on speed. This is made possible by a durable design in combination with vibration-damping grey cast iron components. Saw feed is performed here by a ball screw with servo drive and the sensitive BEHRINGER cutting pressure control system.
Request for a quoteERO PROJEKT D.O.O.
Slovenia
Development and construction of tools in 3D environment.
Request for a quoteIGUS® GMBH
Germany
Other information Series 210 Inner height hi: 21 mm Inner widths Bi: 30 - 120 mm bending radii R: 38 - 200 mm Pitch: 30.5 mm The E4.21 series is identical to 210 series and replaces it. E4.21 - E-Chain® with crossbars at every link Series 220 Inner height hi: 28 mm Inner widths Bi: 40 - 300 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain® with crossbars at every link Series 280 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series 380 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series 400 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 600 Inner height hi: 108 mm Inner widths Bi: 200 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link Series 640 Inner height hi: 112 mm Inner widths Bi: 87 - 562 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link Series 290 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series 390 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series 410 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 601 Inner height hi: 108 mm Inner widths Bi: 200 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every other link Series R760 Inner height hi: 28 mm Inner widths Bi: 50 - 300 mm bending radii R: 63 - 250 mm Pitch: 46 mm E-Tube, swivel lid Series R770 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R780 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R880 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R608 Inner height hi: 108 mm Inner widths Bi: 200 - 500 mm bending radii R: 250 - 1000 mm Pitch: 143 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series IPA certificate: Clean room ISO class 3 (DIN 14644-1) at v = 1 m/s for Series 280.10.100.0 tested ESD classification: Electrically conductive ESD/Atex versions on request Other information Series 210 Inner height hi: 21 mm Inner widths Bi: 30 - 120 mm bending radii R: 38 - 200 mm Pitch: 30.5 mm The E4.21 series is identical to 210 series and replaces it. E4.21 - E-Chain® with crossbars at every link Series 220 Inner height hi: 28 mm Inner widths Bi: 40 - 300 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain® with crossbars at every link Series 280 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series 380 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series 400 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 600 Inner height hi: 108 mm Inner widths Bi: 200 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link Series 640 Inner height hi: 112 mm Inner widths Bi: 87 - 562 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link Series 290 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series 390 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series 410 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 601 Inner height hi: 108 mm Inner widths Bi: 200 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every other link Series R760 Inner height hi: 28 mm Inner widths Bi: 50 - 300 mm bending radii R: 63 - 250 mm Pitch: 46 mm E-Tube, swivel lid Series R770 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R780 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R880 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R608 Inner height hi: 108 mm Inner widths Bi: 200 - 500 mm bending radii R: 250 - 1000 mm Pitch: 143 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and opening of the E-Chain® and E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. System E4/00 E4/00-E-Chain® with 4-piece structure The low-noise E4 chain Further noise reduction with sound dampers (E4/101 series) Wide application range Numerous interior separation options Large accessory kits Widths up to 2000 mm through extension links Snap-open along both sides Max. travel distance: Over 200 m Typical industrial sectors and applications Robotics and handling systems Materials-Handling Technology Refrigeration engineering Construction machinery Machine tools Wood working Any type of machines Semiconductor Clean room applications cold storage houses Welding machines Maritime applications General mechanical engineering etc. IPA certificate: Clean room ISO class 3 (DIN 14644-1) at v = 1 m/s for Series 280.10.100.0 tested ESD classification: Electrically conductive ESD/Atex versions on request
Request for a quoteIGUS® GMBH
Germany
Other information Series R48 Inner height hi: 25 mm Inner widths Bi: 25 - 130 mm bending radii R: 60 - 250 mm Pitch: 30,3 mm E-Tube, snap-open along the outer radius Series R58 Inner height hi: 35 mm Inner widths Bi: 50 - 200 mm bending radii R: 75 - 250 mm Pitch: 33,3 mm E-Tube, snap-open along the outer radius Series R68 Inner height hi: 45 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 36 mm E-Tube, snap-open along the outer radius iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request Other information Series R48 Inner height hi: 25 mm Inner widths Bi: 25 - 130 mm bending radii R: 60 - 250 mm Pitch: 30,3 mm E-Tube, snap-open along the outer radius Series R58 Inner height hi: 35 mm Inner widths Bi: 50 - 200 mm bending radii R: 75 - 250 mm Pitch: 33,3 mm E-Tube, snap-open along the outer radius Series R68 Inner height hi: 45 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 36 mm E-Tube, snap-open along the outer radius E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E2 R100 and E2 R Small pitch for silent operation Protection for cables and tubes against chips (even hot chips) Rugged and tight Space-saving with good ratio of inner to outer dimensions Modular interior separation options Small pitch for low-noise, silent operation Very small radii possible through small pitch Smooth, chip-repellant exterior contour Removable lid for shortening the installation time Double stop dog system for longer unsupported lengths KMA mounting brackets with potential for "all-round" fastening Typical industrial sectors and applications Materials handling Construction machinery Machine tools Timber Processing Machines Long travels in many industrial sectors Semiconductor ESD versions Theater and entertaining industry Vehicles General mechanical engineering etc. In all areas exposed to dirt and chips iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request
Request for a quoteIGUS® GMBH
Germany
Overview for E2/000 advantages Other information Series EF2.21 Inner height hi: 21 mm Inner widths Bi: 25 - 50 mm bending radii R: 35 - 180 mm Pitch: 33.3 mm E-Chain®, snap-open along the outer radius Series 1500 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the outer radius Series 1400 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the inner radius Series 1450 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Half energy tube, snap-open along the inner radius Series 1480 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Full energy tube, snap-open along the inner radius Series 2500 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the outer radius Series 2400 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the inner radius Series 2450 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 100 - 250 mm Pitch: 46 mm Half energy tube, snap-open along the inner radius Series 2480 Inner height hi: 25 mm Inner widths Bi: 38 - 103 mm bending radii R: 100 - 250 mm Pitch: 46 mm Full energy tube, snap-open along the inner radius Series 2700 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the outer radius Series 2600 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the inner radius Series 2650 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 100 - 250 mm Pitch: 56 mm Half energy tube, snap-open along the inner radius Series 2680 Inner height hi: 35 mm Inner widths Bi: 50 - 100 mm bending radii R: 100 - 250 mm Pitch: 56 mm Full energy tube, snap-open along the inner radius Series 3500 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the outer radius Series 3400 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the inner radius Series 3450 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 150 - 300 mm Pitch: 67 mm Half energy tube, snap-open along the inner radius Series 3480 Inner height hi: 45 mm Inner widths Bi: 75 - 115 mm bending radii R: 150 - 300 mm Pitch: 67 mm Full energy tube, snap-open along the inner radius Series 255 Inner height hi: 24 mm Inner width Bi: 25 mm Bending radii R: 55 - 250 mm Pitch: 27.8 mm E-Chain®, snap-open along the outer radius CRC series. 255 Inner height hi: 24 mm Inner width Bi: 38-103 mm Bending radii R: 150 - 250 mm Pitch: 27.8 mm e-chain® Series CRC. 255 Assembly tool E"2/000 e-chains® - quick opening with assembly tools. Assembly tool Overview E2/000 bow chains Two-part - the E2 standard as clamp chain version Overview E2/000 bow chains ESD classification: Electrically conductive ESD/Atex versions on request IPA classification: ISO cleanroom class 3 (DIN 14644-1), at v=2 m/s, with standard material igumid G Series 2500.05.055.0 UL94 V0 classifications on request 46 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, e. g. Series 2600.05.075.0 iF Design Award for the E2/000 series EF2.21 Overview for E2/000 advantages Other information Series EF2.21 Inner height hi: 21 mm Inner widths Bi: 25 - 50 mm bending radii R: 35 - 180 mm Pitch: 33.3 mm E-Chain®, snap-open along the outer radius Series 1500 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the outer radius Series 1400 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the inner radius Series 1450 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Half energy tube, snap-open along the inner radius Series 1480 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Full energy tube, snap-open along the inner radius Series 2500 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the outer radius Series 2400 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the inner radius Series 2450 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 100 - 250 mm Pitch: 46 mm Half energy tube, snap-open along the inner radius Series 2480 Inner height hi: 25 mm Inner widths Bi: 38 - 103 mm bending radii R: 100 - 250 mm Pitch: 46 mm Full energy tube, snap-open along the inner radius Series 2700 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the outer radius Series 2600 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the inner radius Series 2650 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 100 - 250 mm Pitch: 56 mm Half energy tube, snap-open along the inner radius Series 2680 Inner height hi: 35 mm Inner widths Bi: 50 - 100 mm bending radii R: 100 - 250 mm Pitch: 56 mm Full energy tube, snap-open along the inner radius Series 3500 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the outer radius Series 3400 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the inner radius Series 3450 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 150 - 300 mm Pitch: 67 mm Half energy tube, snap-open along the inner radius Series 3480 Inner height hi: 45 mm Inner widths Bi: 75 - 115 mm bending radii R: 150 - 300 mm Pitch: 67 mm Full energy tube, snap-open along the inner radius Series 255 Inner height hi: 24 mm Inner width Bi: 25 mm Bending radii R: 55 - 250 mm Pitch: 27.8 mm E-Chain®, snap-open along the outer radius CRC series. 255 Inner height hi: 24 mm Inner width Bi: 38-103 mm Bending radii R: 150 - 250 mm Pitch: 27.8 mm e-chain® Series CRC. 255 Assembly tool E"2/000 e-chains® - quick opening with assembly tools. Assembly tool Overview E2/000 bow chains Two-part - the E2 standard as clamp chain version Overview E2/000 bow chains IPA Classification Report IG 1303-640-1, tested 1500.050.038.0 at v = 0,5 / 1,0 / 2,0 ISO Class 2, according to DIN EN ISO 14644-1 E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of chain links, filling of the E-Tubes. Assembly Instructions System E2/000 Recommended installation accessories Application examples Applications in various industrial sectors and in the igus® test laboratory. System E2/000 The E2 standard Quickly opened from the right or left with a screwdriver or by hand - opening mechanism accessible from above Lightning fast installation using thumb - safe seat without additional closing mechanism The separators and interior separation sit safely, even when the E-Chain® is open Excellent mechanical stability; design and material provide long service life Typical industrial sectors and applications General construction machinery Materials handling technology Construction machinery Wood machines Machine tools Glass machines Plastic machines Long travels Semiconductor Theater and entertaining industry Vehicles And much more ESD classification: Electrically conductive ESD/Atex versions on request IPA classification: ISO cleanroom class 3 (DIN 14644-1), at v=2 m/s, with standard material igumid G Series 2500.05.055.0 UL94 V0 classifications on request 46 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, e. g. Series 2600.05.075.0 iF Design Award for the E2/000 series EF2.21
Request for a quoteMOH D.O.O
Slovenia
components for making tools for Rubber injection plastic injection high pressure aluminium injection moulding low pressure injection components for making cutting tools components and construction of clamping devices housings holders
Request for a quoteMAROVT D.O.O.
Slovenia
With knowledge gained in past years we can provide you with a complete solution – from the idea to the final product. We cooperate with customers from the beginning, from the idea and this is how we contribute to faster solutions in the field of implementation of forged parts into the final system.Modern software and highly skilled employees are keys for the good-quality, fast and expert construction of complete tools and compounds.To design and program machines we use Siemens NX and Visi Vero software, which enable us to read and write data in several possible formsNX files, Solid Works files, IGES, PARASOLID, STEP, SXF, DWGBy using conversion modules, we can also open and saveCATIA, Pro / E, Inventor and STLTo achieve the shortest possible time from development to final products, we use modern software for simulating forging. We have a QForm product in use, a synonym for forging simulations.
Request for a quoteKW HYDRAULIK GMBH
Germany
Cutting and Sawing of Tubes
Request for a quoteKW HYDRAULIK GMBH
Germany
Striping and Peeling of Tube
Request for a quoteKW HYDRAULIK GMBH
Germany
Pressing Pipes Bending Pipes Striping and Peeling of Tube Brochure Tools for Pipeline Construction Drilling of Tubes Cutting and Sawing of Tubes Chamfering Tool for Plastic Tubes
Request for a quoteSHENZHEN TENKING TECHNOLOGY CO., LTD.
China
Eco-friendly powerbank with LED display
Request for a quoteSCHULZ STANZTECHNIK GMBH
Germany
Tool making & construction: The key to success We know the different industry-specific requirements for stamped parts and parts suppliers. Therefore, our day-to-day work includes very demanding tasks, which we overcome speedily and process reliably. Our spectrum of services for tool construction includes: 3D-CAD/CAM construction and programming (solid works, Peps, HSMworks) Wire-cut EDM (also contract manufacture) with workpiece sizes up to max. 600x400x350 mm Drilling erosion (start hole shooting) with workpiece sizes up to max. 250x350x300 mm Milling technology with workpiece sizes up to max. 650x500x500 mm Turning technology with workpiece sizes up to max. dm 210 x 1000 mm Flat grinding with workpiece sizes up to max. 600x300x375 mm and more…. Even complicated customer requirements are never a problem for us, but are instead a welcome challenge.
Request for a quoteKW HYDRAULIK GMBH
Germany
Chamfering Tool for Plastic Tubes
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TYROLIT - SCHLEIFMITTELWERKE SWAROVSKI AG & CO K.G
Austria
Since 1919, Tyrolit has pioneered technological advancements in construction tools, exemplified by our wall saw blades. We offer wall cutting blades in various quality lines (PREMIUM, STANDARD, TGD®), featuring diverse specifications, dimensions, and properties. Designed to meet varied customer and market needs, our wall saw blades are perfect for openings and breakthroughs in walls or ceilings, and for cutting reinforced or non-reinforced concrete up to 100 cm thick. Blades with TGD® technology ensure even load distribution and optimal cooling, extending blade life and reducing machine strain. Our SILENT design blades reduce noise by 10 dB, benefiting health and noise-sensitive areas. Tyrolit also provides wall saw blades in special dimensions and offers comprehensive application technology support.
Request for a quoteSAMSYS GMBH
Germany
Do you want to use the OnRobot grippers as double grippers? The Dual Quick Changer double gripper system allows the use of different OnRobot gripping tools in one pass. With this innovative solution, you can use two RG2 grippers or one RG6 gripper with a VG10 – it’s up to you. Switch quickly and seamlessly between our tools with the Dual Quick Changer to maximize the utilization of your robots. With the Dual Quick Changer, throughput times can be accelerated and thus the productivity of your plant increased. Not only suitable for OnRobot products. The DUAL Quick Changer can also be combined with tools from other manufacturers. It can also be used for own constructions. Another example are existing tools, which can also be equipped with the OnRobot quick-change system. The Dual Quick Changer is the alternative to the Quick Changer. This makes it easy to install two tools on one robot arm.
Request for a quoteMBS-HYDRAULIK GMBH & CO KG
Germany
MBS hydraulic cylinders of the MZR-1006 series are block-type differential cylinders for use in mold, tool and jig construction. The cylinder connection is very variable due to various mounting holes on the housing and piston rod. Connections with connection holes are available for pipe connections to BSPP ISO 1179-2. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of the types H, HL and HLP according to DIN 51525-1. If you have any questions about areas of application or other options, we are happy to answer them. Download the data sheet for detailed information
Request for a quoteKULLEN-KOTI GMBH
Germany
Interior brushes are particularly suitable for deburring recesses and holes in O-rings and for cleaning, smoothing and derusting. They are used in conjunction with drilling machines, flexible shafts and machining centres.The particular purposes of tube cleaning brushes are to derust, clean and descale the insides of tubes. They are used for manual processing and in flexible shafts and static machines. Alphahon brushes are elastic, flexible brushing tools. At the bristle tips they hold globules made from bonded abrasives. This special construction enables the tools to deburr cross-holes and also to improve adherence of lubricants. Special types with flat pressed wire can be supplied to order.
Request for a quoteFORKLIFT ENERGIE
France
Offer our expertise in the design of energy storage products and systems to meet your expectations in terms of : functionality, lead times, cost, manufacturing, safety and durability - that's our mission. For your on-board energy storage system, FORKLIFT ENERGIE, a DC specialist, will work with you to develop advanced, customised solutions based on your technical requirements and needs. Our energy storage design office puts all its industrial know-how at your service to help you build this equipment, whether it's an agricultural robot, an innovative tool for the construction industry or an AGV for the aerospace industry. Our industrial experience and our sensitivity to technological and financial choices ensure that you end up with reliable, functional and durable equipment that is perfectly suited to its users.
Request for a quotePACA GMBH
Germany
The Paca Component Cleaner is a professional, fast cleaner. Versatile and effective, it is universally usable and largely biodegradable. It removes oil and grease, hardened residues and brake fluid. It degreases glued surfaces and sealing surfaces, cleans com- ponents efficiently and safely, dries quickly and leaves no residue. CO2 propellant AOX-free Fields of application The automotive industry, construction machinery, agricultural machinery, tools, sport, hobbies, home and garden, office Usage Check the rubber and plastic parts for compatibility beforehand, as Paca Component Cleaner may cause lacquers to corrode. Spray Paca Component Cleaner at close range onto the part which needs cleaning, repeating this step if there is excessive contamination. Allow the solution to dry, then wipe over with a clean cloth. Always shake Component Cleaner well before use! Batch quantity/Packaging units Batch quantity: 150ml and 500ml spray cans Packaging units: 24 150ml cans or 12 500ml...
Request for a quoteNOVELTY STEEL
Turkey
Construction equipment attachments are specialized tools and devices designed to increase the functionality and versatility of machine enabling them to perform a wide range of tasks. They allow construction companies to get the most out of their equipment, from excavators to backhoe loaders and more. Novelty Steel is an experienced fabricator of attachments and their parts for many industries including mining, demolition, construction, quarrying. * Buckets * Grapples * Blades * Couplers * Hydraulic Breakers
Request for a quoteFÖHRENBACH GMBH
Germany
The versatile control unit for handling, assembly technology, linear robots The unipos 330 is a universal, modular CNC continuous path control for up to 3 axes (interpolating) in connection with a PLC for controlling most reliable applications for machine construction automation technology, machine tools and special applications. Depending on the design, either stepper motors or servomotors are used as axis drives. The integrated panel PC with the LINUX operating system allows convenient programming of your application and the user interface (HMI). Features Interpolating continuous path control for a maximum of 3 servo axes CNC programming using G code 1 to 3 axes / stepper motors or servomotors Processor: 32-bit microcontroller, 400 MHz, without fan 7" touch screen, resolution: 800 x 480 DPI, TFT colour
Request for a quoteANKARA BRONZ
Turkey
Mercury steels are a set of steels that are hardened with water suitable for the construction of tools such as twist and dental drills, Guides, Drift punches, Countersinks , Center drills, Rasps, Hole punches, Metal saws, Drawing punches and all sorts of staples, connecting tab and similar tools.
Request for a quoteWORLDWIDE MACHINING SPARE PARTS
Turkey
Mercury steels are a set of steels that are hardened with water suitable for the construction of tools such as twist and dental drills, Guides, Drift punches, Countersinks , Center drills, Rasps, Hole punches, Metal saws, Drawing punches and all sorts of staples, connecting tab and similar tools.
Request for a quoteQP PLC
Hungary
The Customised manufacturing is performed in a 3000 sqm area. We offer a wide range of services: we construct and machine small, medium and large size components, from 10mm till 5200x3250x2700mm and we have a giant CMM to measure the big size: DEA ALPHA, Leitz X1 - 5000x2500x1800 mm. We have more than 30 machines in this facility (milling, CNC machining centres, grinding, lathes) and 2 Quality laboratories. We have a painting, welding and heat (surface) treatment services. The strength of this division is the design and manufacturing of fixtures and dedicated machines aiding manufacturing. We can imagine, create and produce fixtures and we can assembly and test, even if this is hydraulic or pneumatic. We can perform electrical work as well.
Request for a quoteKIS ANTRIEBSTECHNIK GMBH & CO. KG
Germany
We manufacture our KIS tapered roller bearings in both single and double row designs. Since they can support both axial and radial forces, they can also withstand high loads. Due to their high precision they are suitable for shafts that are to be guided axially precisely (locating bearings) or if the bearing Tapered roller bearings are easy to adjust and disassemble, making them easy to mount and maintain. Tapered roller bearings are the perfect choice for applications where high loads or high precision are required. Our KIS tapered roller bearings are used in a wide range of applications, such as motors, compressors, construction machinery, machine tools and gearboxes. We will be happy to advise you on possible variants with different properties.
Request for a quoteResults for
Construction tools - Import exportNumber of results
59 ProductsCountries
Company type
Category