Conduits - Import export

For costumers from the steel industry, power plant construction, the chemical industry as well as other industries we manufacture specific pipelines in all sizes and fittings based upon isometric projections or customers´ measurements.

NSPV Rigid Electrical Conduit with Belled Ends MD grey and HD orange types Features: UV resistant; Australian Standard; PVC Conduit protects and allows runs of cables and conductors; For routing electrical wiring aboveground or underground.

NSPV PVC Corrugated Conduit Pipe with MD GREY and HD ORANGE types Features: UV Stabilised; Australian Standard; Suitable for residential, industrial and commercial application where wiring needs to be concealed or provided with mechanical protection.

Height of fall: 100, 200, and 300 mm, Mass of falling weight: 1 kg / 2 kg, Dimensions of base plate: 250 x 150 x 40 mm (approximately), Diameter of conduits that can be tested: 16 to 63 mm

We have a variety of pipes for different purposes. Please contact us for the sizes and types of pipes.

WDM Deutenberg produces corrosion-resistant cable conduits. We permanently guarantee to fulfill your high security standards for functional integrity in case of fire, earth quake or vandalism.

L-section for separation of gravel and substrate. Simple installation due to click-connection system. Installed on protection membrane, drainage elements or filter fleeces; connectable to water conduit systems. For roof pitches of up to 5°.

Optigrun Triangle Water Conduit WLP Plus is used as water conduit system to support the discharge of excess water from drainage and substrate layers. Profiles may be interconnected by means of simple click-locks to any desired length.

NSPV Waterproof cable gland for corrugated pipe Product material part is made of UL-approved Halogen-free PA66 (Flame calss UL94-V-2),B and D is made of EPDM weathering rubber. Features: Special clamping jaw and clamping ring design,large clamping cable range,strong tensile strength,waterproof,dustproof,salt resistant,weak acid,alcohol,oil,grease and general solvent.

NSPV M25AL Waterproof and breathable connector plain screwed adaptor Product material part is made of UL-approved nylon PA66 (Flame calss UL94-V-2),B and D is made of EPDM weathering rubber. Features: Special clamping jaw and clamping ring design,large clamping cable range,strong tensile strength,waterproof,dustproof,salt resistant,weak acid,alcohol,oil,grease and general solvent.

NSPV Plain to Screwed Thread Conduit Coupling Plain to screwed adaptors is designed with one side to fit rigid conduit and the other has an internal threaded end. Rigid conduit is inserted to the plain end and the threaded end requires a male adapter to be screwed into it.

NSPV PVC solid pipe coupling Features: AS/NZS 2053.2:2001 standard; Plain coupling for indoor and outdoor electrical installations.

NSPV PVC Junction Box 1Way Entry Features: AS/NZS 2053.2:2001 standard.

NSPV PVC Converting Adaptor C/W Lock Rings Features: AS/NZS 2053.2:2001 standard; High flow capacity; Corrosion resistant; Lightweight, easy to install.

PFLITSCH offers various hoses to provide comprehensive protection against mechanical and thermal damage to cables, for example where cables are installed in a corrosive environment or where cables run across the floor between a machine and a mobile operating enclosure. The UNI Dicht® system has suitable solutions in metal and plastic for safe connection of hoses to cable glands in these situations. Clampless variants are most suitable e.g. for the food industry, where no contamination or dirt is allowed to build up. These variants have all the advantages of the UNI Dicht® system, including a excellent seal up to IP 68, superior strain relief values, EMC and Ex-compatibility as well as great versatility of application. Also available are cable glands for Smooth hoses Spring-stiffened UL hoses Hoses with external steel braid Availability in sizes from M6 to M120 and Pg 7 to Pg 29.

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, screwing insert: PE, lamellar insert: PA 6, sealing ring: CR, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar / IP69k, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -30 °C to +75 °C, connection thread: M16 - M25

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: PA, colour: jet black (RAL 9005), protection class: IP54, range of temperature: -25 °C to +115 °C, connection thread: PG7 - PG48

LOOSE TUBE CONSTRUCTION, WATERTIGHT, RODENT PROTECTION, HALOGEN-FREE, FLAME RETARDANT Suited for indoor and outdoor use - for fixed laying in cable ducts, conduits or direct burial

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: PA, colour: jet black (RAL 9005), protection class: IP64, range of temperature: -25 °C to +100 °C, for thread: PG7-PG48

Products for industrial cable protection systems - Safety even under extreme conditions Cables are often exposed to various safety risks: Overheating Cold Humidity v.m. Adequate protection is therefore essential if you want to be sure that all connected devices and applications function smoothly. At FRÄNKISCHE you will therefore find products for high-quality industrial cable protection systems from FIPSYSTEMS. The FIPMETAL® metal conduits made of galvanized steel and with special clamping are characterized by their high flexibility and good mechanical protection and can therefore be installed in many industrial applications.

Cable protection tubes for industry with different properties: With our corrugated tubes, threaded tubes, protective hoses and connection fittings, you are well equipped for all eventualities. They easily withstand both low and high temperatures and also have excellent fire protection and flame properties. Many of our products for industrial cable protection systems are also distinguished by the following features: self-extinguishing halogen-free cadmium-free low flue gas emission weatherproof chemical permanence antistatic Accessories for your industrial cable protection: Of course FRÄNKISCHE Rohrwerke also supplies the appropriate accessories for your industrial cable protection. Mounting clips (with and without base) Mounting rails System holder (Corrugated) pipe clamps PETP - pipe edge protection v.m. Our products for industrial cable protection systems are suitable for all industrial pipe systems from our range.

The divisible corrugated conduits from FRÄNKISCHE Industrial Pipes offer the perfect solution for retrofit application of cable protection, also pre-assembled cable harnesses with already installed connectors. This divisible conduit type is suitable for applications in which cables or pipelines have to be marked separately. The suitable accessories from FRÄNKISCHE Industrial Pipes enable clean laying and fixing of pipes that are safely protected by FIPSPLIT - divisible corrugated pipes.

Cable conduits made of PE-HD with plug-in sleeve Manufactured acc. to DIN 16876 Standard design: Sleeve type: integrally moulded plug-in sleeve (SM) Sealing ring: compression lip sealing ring, type “SX” (inserted in the factory) Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black Inner surface: smooth Possible designs: Quality: DIN 16874 Length: 1 m to 6 m Coloured stripes: co-extruded Colour: on request Outer surface: coloured co-extruded or solid dyed Inner surface: inner grooves for reducing the cable pull-in forces Labelling: acc. to customer specifications

Cable conduits made of PP with plug-in sleeve Manufactured acc. to DIN 16878 or prEN 14285 Standard design: Sleeve type: integrally moulded plug-in sleeve (SM) Sealing ring: compression lip sealing ring, type “SX” (inserted in the factory) Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black Inner surface: smooth Possible designs: Length: 1 m to 6 m Coloured stripes: co-extruded Colour: on request Outer surface: coloured co-extruded or solid dyed Inner surface: inner grooves for reducing the cable pull-in forces Labelling: acc. to customer specifications

Composite cable conduit made of PE-HD with outer corrugation in coils Manufactured acc. to DIN EN 61386-24 Standard design: Type: with outer corrugation and inner pipe Typ: 450 N Sleeve type: double plug-in sleeve, sand-tight design Material: PE-HD Length: 50 m in coils, with inside cable pull-in aid Colour outer surface: black Possible designs: Sleeve type: double plug-in sleeve, water-tight design Length: on request Colour: red, yellow, blue, green or orange

The FPDR type of conduit made of specially modified Polyamide 12 provides self-extinguishing fire characteristics and excellent fatigue strength against continuous dynamic flexing movements. Especially suitable for heavy duty robotic applications. These conduits also offers good mechanical strength such as chafing resistance as well as very high chemical resistance. Therefore this product perfectly matches for most demanding application requirements. Application: Robotics

Products for industrial cable protection systems - Safety even under extreme conditions Cables are often exposed to various safety risks: Overheating Cold Humidity v.m. Adequate protection is therefore essential if you want to be sure that all connected devices and applications function smoothly. At FRÄNKISCHE you will therefore find products for high-quality industrial cable protection systems from FIPSYSTEMS. The high-temperature corrugated conduits, made of high-tech polymer materials, are suitable for cable protection applications with high continuous temperature requirements and for maximum chemical resistance.

Cable conduits made of PVC-U with adhesive sleeve Manufactured acc. to DIN 16875 Standard design: Sleeve type: adhesive sleeve Sharp end: onesided with chamfer Length: 6 m Colour: black/anthracite Possible designs: Length: 1 m to 6 m Colour: special colours are available in request Labelling: acc. to customer specifications

Composite cable conduit made of PE-HD with outer corrugation Manufactured acc. to DIN EN 61386-24 Standard design: Type: with outer corrugation and inner pipe Type: 450 N Sleeve type: double plug-in sleeve, sand-tight design Material: PE-HD Length: 6 m Colour outer surface: black Possible designs: Sleeve type: double plug-in sleeve, water-tight design Length: on request Colour: red, yellow, blue, green or orange