Conductivity sensors - Import export

Calibration software for the conductivity sensor of 36XiW-CTD level probes.

Conductive level monitor for the detection of conductive media. With this sensor, the resistance between two electrodes is measured. If a medium shorts both electrodes, the resistance decreases and a switching signal is generated. Buildup is no problem for this sensor.

The IST AG LFS1505 conductivity sensor offers a typical cell constant of 0.68 cm-1 and a conductivity measuring range from 100 μS/cm to 200 mS/cm (extended range from 10 μS/cm to 200 mS/cm possible with cell-constant correction) within an operating temperature range of -30 °C to +100 °C. However, it easily withstands temperatures over 130 °C enabling processes like sterilization by autoclaving. Further advantages of the LFS1505 thin-film conductivity sensor include: — Wide conductivity and temperature range — Fast response time — Optimal accuracy — Resistance to various chemicals1) — Excellent long-term stability — Integrated RTD for temperature compensation — Four-electrode measurement2) — Customer-specific sensor available upon request The IST AG LFS1107 conductivity sensor is available with either Pt/Ni-wires or Cu/Ag-wires with PTFE-insulation (AWG 30) as standard wires.

The IST AG LFS1710 conductivity sensor offers a typical cell constant of 0.44 cm-1 and a conductivity measuring range from 0.2 mS/cm to 200 mS/cm within an operating temperature range of -30 °C to +100 °C. However, it easily withstands temperatures over 130 °C enabling processes like sterilization by autoclaving. Further advantages of the LFS1710 thin film conductivity sensor include: — Wide conductivity and temperature range — Fast response time — Optimal accuracy — Resistance to various chemicals1) — Excellent long-term stability — Integrated RTD for temperature compensation — Four-electrode measurement2) — Customer-specific sensor available upon request The IST AG LFS1107 conductivity sensor is available with either Pt/Ni-wires or Cu/Ag-wires with PTFE-insulation (AWG 30) as standard wires.

The IST AG LFS1305 conductivity sensor offers a typical cell constant of 0.86 cm-1 and a conductivity measuring range from 100 μS/cm to 200 mS/cm within an operating temperature range of -30 °C to +100 °C. However, it easily withstands temperatures over 130 °C enabling processes like sterilization by autoclaving. Further advantages of the LFS1305 thin-film conductivity sensor include: — Wide conductivity and temperature range — Fast response time — Optimal accuracy — Resistance to various chemicals1) — Excellent long-term stability — Integrated RTD for temperature compensation — Four-electrode measurement2) — Customer-specific sensor available upon request

This mounting adapter from Therma was developed to match the friction thermocouple MST-20347. Mounting helps conduct the friction sensor securely and with uniform pressure on the brake disc, facilitating the most precise measurement results. The mounting adapter for MST-20347 is M12x1 and becomes delivered with locknut.

The Conformable TactArray is a ~1mm thick flexible sensor constructed from soft, conductive cloth and captures pressure distribution between two objects in direct physical contact. The Conformable TactArray can accommodate varying degrees of curvature and can output accurate, repeatable data even while wrapped around irregular shapes. Key Features and Benefits: Maintain high-resolution and capture quality data even around complex shapes High resolution, sensitivity, and repeatability allow for consistent capture of accurate data The sensors can capture a minimum sensing pressure of 10 Pascal Save time and improve results through repeatable accuracy and less recalibration time needed Available in a wide range of size configurations, pressure ranges, and resolutions Comes standard with the powerful Chameleon Visualization Software

Conductive plastic and Hall rotary sensors and encoders to determine an angular position. Our potentiometers and membrane sensors are also custom-made to your requirements.

RM2M offers a range of level sensors for liquids and solids. Rotary level sensors for solids: For high temperature, food processing, corrosive, or ATEX environments. Capacitive level sensors for solids: With power supply of 115-230VAC, 24-48VAC, or 24VDC. Membrane level sensors for solids: Operate with the pressure of the material on the membrane. Doesn't require a power supply. Pendular level sensors for solids: Simple and reliable sensor for powders forming a cone in the silo. Does not require a power supply. Conductive level sensors for liquids: Level sensor capable of controlling up to two levels. Available with the following power supplies: 115-230VAC, 24-48VAC, 24VDC. Floating level sensors for liquids: These models do not require an electrical power supply. Versions for agressive environments and food processing.

EGE capacitive sensors for use down to -230°C reliably detect deep-frozen liquid gases or granulates for cryogenic grinding, for example. The sensors are based on the proven capacitive principle. The measuring element of the sensor designed as a cylindrical capacitor. The medium to be detected functions as dielectric. The medium in touch with the sensor generates a capacity change. This is converted into a switching signal or an analogue 4...20 mA output signal. This applies both to conductive and on-conductive media. The sensors reliably record super-cooled liquid gases or granulate, for example for cryogenic milling. With their compact design the sensors of this series are well suited for installation in tight spaces.

The LMP 308i is designed for continuous fill level and level measurement of water and liquid mediums. The signal processing of sensor signal is done by digital electronics with 16-bit analog digital converter. Consequently it is possible to conduct an active compensation of sensor intrinsic deviations from normal condions like nonlinearity and thermal error. In order to facilitate stock-keeping and maintenance the transmitter body is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure: 0 ...4 mH2O up to 0...200 mH2O — accuracy: 0.1 % FSO — diameter 35 mm — cable and sensor section separable — thermal error in compensated range -20...70°C: 0.2 FSO TC 0.02% FSO/10K 0,02 % FSO / 10K — high accuracy — communication connection — turn-down 1:10 Optional Features: — IS-version — mounting accessories as cable gland and terminal clamp in stainless steel

Conductivity sensor for water Analysis The conductivity sensors of the OPTISENS COND 1200 series have a standardized robust design and a long lifespan. The conductive measurement principle is characterized by high sensitivity, especially at low conductivity values. For this reason, the COND 1200 sensors are perfect for low-contaminated, noncorrosive media such as pure water, steam and cooling water.

Inductive conductivity sensor for water Analysis The inductive conductivity sensors of the OPTISENS IND 1000 feature a compact and extremely rugged design as well as a wide measuring range. In combination with the MAC 100 signal converter it is possible to create an extremely reliable and low-cost measurement system, which is suitable for a wide range of water analysis measurement tasks. These systems are very well suited for conductivity measurements in severely contaminated, aggressive media in the water and wastewater industries. - Compact design for pipelines with small diameters - Wide measuring range (0.5…2000 mS/cm) - Corrosion-resistant and dirtrepellent material PP or PVDF - Completely enclosed measuring cell with two inner, ring-shaped measuring coils - Integrated temperature sensor

The thermal conductivity measuring insert is intended for measurement of the thermal conductivity coefficient temperature dependencies in constant magnetic field using stationary method. The inner sample holder is equipped with the resistive heaters, resistive temperature sensors and Hall sensor. The thermal conductivity measuring insert characteristics: - relative measurement accuracy of thermal conductivity coefficient: 3 %; - sample dimensions: a rectangular plate 22×4×2 mm; - temperature interval – from 80 to 370 K; - magnetic field interval – from 0.02 to 2 T.

The DJY and DJM series boiler drum electrode sensor is matched with our company’s UDZ double color digital display intelligent liquid level controller. It can be widely used in large and medium-sized boilers of power generation, dyeing and weaving, chemical industry and other industrial and mining enterprises. It can be used to monitor the water level of boiler drum, high-pressure heater, generator, evaporator, condenser, Start-up Separator of once through boiler, water tank of double water-cooled generator, and liquid level measurement of other conductive liquids. Screw Type Electrode Sensor This electrode sensor mainly used on boiler and to measure the boiler drum water level.

Liquisys CLM223 is a standard transmitter for all analog conductivity sensors. It improves your operational safety thanks to continuous plausibility, process and sensor checks. Select from numerous hardware and software modules, such as relays or fieldbus communication, to adapt it exactly to your measuring task. This modularity also allows you to upgrade the transmitter at any time. A simple menu and calibration make configuration and operation fast and easy.

Condumax CLS21D is a robust conductivity sensor for all process and environmental applications. It provides you with precise and reliable measuring values for an optimum process and product quality monitoring. Better still, the sensor features high chemical, thermal and mechanical stability and high durability. Thanks to Memosens digital technology, CLS21D combines maximum process and data integrity with simple operation. It resists corrosion and moisture and facilitates predictive maintenance.

The Indumax CLS54D inductive conductivity sensor protects all of your products and processes that must meet the strictest hygienic and sterile demands. Its outstanding performance combined with a unique hygienic design ensures highest safety and quality of your products. Thanks to Memosens digital technology, Indumax CLS54D combines maximum process and data integrity with simple operation. It resists corrosion and moisture, enables lab calibration, and facilitates predictive maintenance.

Indumax CLS50D is a digital inductive conductivity sensor for standard, hazardous and high-temperature applications. Benefit from high chemical resistance and long durability thanks to robust materials (PFA, PEEK). Moreover, it is insensitive to soiling and performs reliable and repeatable even in harsh and aggressive media. Thanks to Memosens, CLS50D combines maximum process and data integrity with simple operation. It resists corrosion and moisture and facilitates predictive maintenance.

Condumax CLS12 is a robust conductivity sensor for steam/water cycles in power plants. It is optimized for low conductivities (even under high temperatures and pressures) to protect your processes from deposits and corrosion. Low maintenance and simple to commission (large connection compartment), this is the ideal sensor for tough environments.

Memosens CLS82D is a hygienic, digital sensor for applications with widely varying conductivity values, where it performs reliably, safe and fast. Numerous certificates, various process connections and a small compact design ensure the perfect fit for your process. With Memosens digital technology, CLS82D combines maximum process and data integrity with simple operation. It resists corrosion and moisture, enables lab calibration and facilitates predictive maintenance.

Ceragel CPS71D is the digital specialist for sterile and hygienic applications. Its contamination-resistant gel guarantees stable measurement even in flowing media or low conductivity. The sensor is sterilizable, autoclavable and non-toxic assuring highest safety of your products. Thanks to Memosens digital technology, CPS71D combines maximum process and data integrity with simple operation. It resists corrosion and moisture, enables lab calibration and simplifies predictive maintenance.

Liquiline CM14 is a basic transmitter that offers all that you need to run a standard measuring point. It fits in the common cabinet cut-outs and is easy to commission thanks to Memosens digital technology. The Memosens hot plug and play concept allows you to quickly install and configure your digital pH/ORP, conductivity or dissolved oxygen sensors. Liquiline CM14 is compact, easy-to-operate, and cost efficient.

The tank serves as a reservoir for demineralized water and supplies up to 11 AEM electrolysers. A conductivity sensor provides the supply of the electrolysers with <20µS. Capacity 38 L Max output water flow 3.8 l/min.

KHM 103 EXPERT Smallest unit of measure: +/- 0,5 % Temperature compensation: automatic or by way of external sensor from -50 to + 95° C by way of internal sensor from 0 to 60° C Permissible surrounding temperature: 0 to 60° C Permissible surrounding humidity: 0 to 80% (non-condensing) Electricity supply: 9 V block battery (type: JEC 6F"") included in scope of supplies battery EOL indicator: automatic, “BAT” when battery is empty KHM 103 EXPERT S91 digital moisture measuring unit with automatic temperature compensation (ATC) and M100B precision space and temperature measuring unit, batteries, measuring cable, temperature hand sensor, shock electrode with steel pins, brush probe, special board sensor, conductive paste, building material plug complete with measuring tables for wood and building materials in the carrying case.