Results for
MIKROPOR
Turkey
Mikropor MDA Heatless Desiccant Air Dryers provide constant -40⁰C (-70⁰C Optional) pressure dew point.These dryers are designed to supply clean and very dry compressed air for critical applications. Pre-filters and after-filters are standard on all Mikropor Heatless Air Dryers to keep the air stream clean and maintain the integrity of the desiccant medium. A very reliable electronic controller is utilised so the dryer operates perfectly through its service life. MDA Heatless Desiccant Dryers are equipped with special valves and high quality desiccants in order to assure performance and provide the lowest pressure drops available in the market.
Request for a quoteMIKROPOR
Turkey
Cycling refrigerated dryer design helps you achieve optimal performance at a lower cost compared to a Digital Cycling design.To reduce energy consumption, the dryer refrigeration system automatically deactivates during periods of low load and features a patented heat exchanger and thermal mass circuit.MCY Series Air Dryers are highly reliable, efficient, have small space requirements and offer low cost ownership. Integration of pre / post filtration within the dryer cabinet saves labour time, installation cost and valued production space. The compact size also offers flexibility and economy during transportation.
Request for a quoteMIKROPOR
Turkey
"What Mikropor offers you with MKE SERIES: - Low pressure drop saves compressor power - Quick start and reaction time provides additional production time - Every dryer is specially designed with the right components to consume the lowest energy - Highly energy efficient and environmentally friendly R134a refrigerant across all models. - R513a refrigerant is optional. - A state-of-the-art heat exchanger design provides the highest cost saving in the industry - Best in class refrigerant compressors consume less energy against competition dryers - Pressure switches control the condenser’s fan motor for saving energy and letting the system operate at desired conditions - This is not only a dryer, but an air treatment package that delivers an air quality of class 1.4.1 as per ISO 8573:2010 due to integrated filtration"
Request for a quoteMIKROPOR
Turkey
Mikropor Compressed Air Filters have been designed to meet all requirements of the compressed air filtration world. These air filters provide more comfortable usage for end users with an increased endurance, higher efficiency at lower pressure drop and more port size options.The air filters have four efficiency ratings, removing contaminants as small 0.01 micron at up to 290 psi (20 bar)- 1/4” to 3” NPT/BSP pipe sizes. A protected auto float drain (2 mm orifice) is standard for optimal and reliable removal of liquid contaminants. These air filters have a zero-porosity aluminium and durable epoxy powder-coat finish, along with a corrosion-resistant internal coating for a long service life. Filter combinations are configured to meet specific application requirements. Filters comply with PED and perform as per related ISO 8573 standards. These filters may be equipped with differential pressure gauges for easy maintenance and energy efficiency.
Request for a quoteMIKROPOR
Turkey
With over 30 years of experience Mikropor manufactures the best performing replacement elements in the industry. Mikropor offers four layers of Superior Protection-from 1 micron to 0.01 micron. Durable element construction and an efficient drain layer ensure continued performance with optimal element change periods.Additionally, High efficiency Micro-Glass nanofiber media (80 times finer than Cellulose Fiber) delivers higher targeted efficiencies, longer service life, wide chemical and synthetic lubricant compatibility even at extreme working temperatures.Mikropor assures that the replacement elements perform equal to or better than the original elements. Replacement elements have been designed and tested in ourstate-of-the-art test laboratories.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MIKROPOR
Turkey
"The light weight modular design desiccant dryer series brings a new concept in compressed air technology, offering total installation flexibility to meet specific needs. Mikropor’s Modular Desiccant Dryers are less than half the weight and size of a traditional twin tower design, allowing even the largest models to be easily moved through a standard doorway. Mikropor’s innovative Modular Air Dryers make it easier and more affordable than ever to deliver high-quality compressed air for virtually herever it’s needed. Mikropor Modular Desiccant Dryers have cosmetic beauty and can be located in clean, pleasant environments eyesore. Offered in sizes from 5 m³/h to 400 m³/h with dew point of -40°C to -70°C (optional) these dryers are equipped with everything you need, requiring only air inlet/outlet connections."
Request for a quoteMIKROPOR
Turkey
"This design achieves a hyper-efficient 100% contact between the air and refrigerant circuits, delivering state-of-the-art performance and great cooling efficiency. The state-of-the-art 3-in-1 design features very low differential pressure delivering significant energy savings. The 3-in-1 Heat-Exchanger is compact and allows the dryer to be smaller and reduces the space required for the dryer. Mikropor offers a variety of 3-in-1 dryers equipped with the 3-in-1 Heat-Exchanger to meet a full range of capacity and power requirements."
Request for a quoteMIKROPOR
Turkey
"Mikropor is proud to announce that the new MK-DS series explicitly prevails over any other type of refrigerated air dryer by achieving everyone’s goal to lower energy costs. The MK-DS Series, with a specially designed heat exchanger and digital scroll compressor, provides unrivalled energy efficiency in a refrigerated air dryer. The challenge of maintaining a stable dewpoint and saving energy can be overcome with this latest technological development. Combining Mikropor’s expertly designed heat exchanger, leading filtration technology and digital scroll compression in Mikropor’s MK-DS dryers provides the ultimate energy efficiency solution for compressed air systems with varying levels of air demand."
Request for a quoteMIKROPOR
Turkey
"Most compressor manufacturers do not use an aftercooler on their piston type compressors. Therefore compressed air exits the compressor at about 100°C temperature. Mikropor's High Temperature Dryer has an aftercooler to reduce the inlet temperature."
Request for a quoteMIKROPOR
Turkey
A centrifugal blower and high efficiency heater eliminate the use of valuable compressed air for desiccant regeneration.The completely automatic drying system uses blower to pull ambient air and pass it through the heater. This hot air stream flows opposite to drying flow direction. Hot air above 200⁰C regenerates the moisture inside desiccant bed and strips it completely of all moisture. The advanced control system monitors the dew point and adjusts the heating/regeneration accordingly thereby providing valuable energy savings.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Pressure gauges for maintenance units, pressure regulators and control panel installation, Fastening elements, linking accessories and brackets, containers, drainage valves, control magnets, Spare parts for compressed air treatment equipment
Request for a quotePRESSTA EISELE GMBH
Germany
A double head mitre saw with disappearing blades specifically studied for the tubular steel shapes. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 45° and 135°. It is equipped with the system TS 690. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Speed of rotation of the blades, variable by means of a frequency converter (inverter). Automatic shifting of the support plates of the profile once over the cutting cycle. Dynamic protection guards for a total covering of the cutting area. Blade lubrication cooling system with electric pump. Coolant liquid vat with extractable pump for vat cleaning. Cutting deepth stop device. Intermediate workpiece support automatically operating Mobile roller conveyor with pneumatic clamp for section support Compressed air treatment unit (filter/reducer/lubricator)
Request for a quotePOPPE + POTTHOFF MASCHINENBAU GMBH
Germany
Poppe + Potthoff Maschinenbau GmbH supplies compressor units and pressure control systems of up to 400 bar for various gases. We offer ready-to-connect units to increase the existing pressure for pneumatic and hydraulic applications. In this way, the performance of existing systems can be increased flexibly and efficiently. Our compressor units are used wherever the existing system pressure is insufficient to implement specific applications. Of course, our systems are UL or CE compliant as required. In addition, we offer you service and support directly on-site.
Request for a quoteEISELE GMBH
Germany
- Made of polyamide (PA) - Color black (red, blue, green, yellow, natural, brown, orange and grey: specify when placing order; subject to extra charge) - External calibration; for use with Eisele plug connectors - Temperature range -76 to 212 °F (-60 to +100 °C) - Suitable for vacuum - Free of PWIS and halogen - Suitable for fuel - For automotive industry according to DIN 73378 - Drag chain compliant
Request for a quoteOMEGA AIR
Slovenia
AAF compressed air filters are designed for the protection of the downstream compressed air system and equipment with lower airflows against defects and other failures. They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 16 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 5 different grades of filter elements (P, R, M, S and A). Optional internal and external condensate drains should be used for efficient condensate draining from the filter housing.< /br> <b>Features</b> <ul> <li>A wider range of different models for different flow rates, including larger 2” and 3” sizes. </li> <li>Convenient design for assembly of several filters and for wall mounting</li> <li>AVELOCK antivibration element lock system<li> <li>Needle felt drainage layer instead of foam for improved thermal resistance<li> <li>X2-COAT internal anti-corrosion protection<li> </ul>
Request for a quoteResults for
Compressed air treatment - Import exportNumber of results
16 ProductsCountries
Company type