Cold working - Import export

We offer sheet metal rolling services performed according to the highest standards of precision. With the help of high-performance rolling machines, our specialists will help you turn parts from flat to cylindrical and conical in the shortest possible time. Sheet metal rolling involves cold working of the sheet metal, through which the metal is shaped, taking on curves. The rolling process is essential when manufacturing certain complex products which combine different radii of curvatures. Our rolling services cover both sheet metal rolling and rolling operations for round pipes with a diameter of 20 mm, 40 mm or rectangular pipes of various sizes. For more information about the technical aspects of our rolling services, please contact us by filling in the online form.

So far, have you worn hats you bought randomly? They didn't fit your outfit very well, and the thermal comfort they were supposed to provide was quite poor? It's high time to change this before autumn arrives. The Monique women's winter hat is our proposition created for demanding women. The unique style of the hat will appeal to women of all ages - teenagers and mature women. The cap has characteristic folds on the body, which give it a certain rakishness. Monique is a women's hat for autumn and winter Cold mornings and the accompanying dilemma - should I wear a hat, damaging my hair, or risk catching a cold and go to work with my head uncovered? With the Monique women's hat, such dilemmas will no longer arise. The cap is designed and sewn in such a way that there is enough space under it for women's hair. Thanks to this, the hairstyle is less deformed and the hair becomes greasy much slower than when wearing classic hats.

Our collection of work jackets offers a wide range of options, from ideal fleece work jackets for professionals working in cold weather conditions to windproof jackets with removable sleeves, quilted jackets, and denim work jackets. Our anorak jackets provide maximum protection in adverse weather conditions, while our fleece work jackets keep you warm. Our jackets with removable sleeves make it easy for you to adapt to different weather conditions.

Thermal work jacket with fleece interior. Made from twill fabric that mixes cotton with polyester that provides durability and resistance and an interior with fleece fabric for greater thermal retention. Ribbed cuffs with elastic that fits comfortably. Waist with elastic on the sides for a better fit and greater comfort. Two slanted pockets at the waist and a reinforced one on the left side of the chest, all with zips, to keep everything accessible and highlight the marking. Customization methods: download Ideal as workwear and work uniform in cold climates.

Electroluminescent means “Cold Radiation” working with electrical high frequency. There is no resistance or filament directly in this technology. Electroluminescent only lights up with “High Frequency”. For this reason, Electroluminescence is called Cold Radiation. Although Electroluminescent takes the name cold radiation, Electroluminescence emits very little heat (25 degrees) outside. Electroluminescence never burns the hand that can be touched. Electroluminescent need Inverter, which is a kind of transformer, to make the light. With “high frequency” electrical energy supplied by INVERTER, it strikes the barrier between the pressures and gets stuck, FOSFOR, which cannot find a place to escape, thus emerges as LIGHT.

Whether you want to reliably keep construction zones warm, effectively heat larger halls, protect your livestock from the cold or keep your work material free of ice despite low temperatures: with 100 kW of direct heating power the IDE 100 D provides a high heating capacity for every demand with 100 % efficiency. The integrated oil burner of this heating device can be fuelled by either diesel or fuel oil. The continuous fuel supply to the stainless steel combustion chamber is regulated by means of a high-quality Danfoss® injection pump. Safe operation of the oil heater fan is ensured by an electronic flame trap and an integrated overheating protection. Among the further assets are the easily accessible, external fuel filter as well as the possibility to easily read the remaining fuel volume at the filling level indication integrated in the tank.

it meets the emission standards of exhaust r under the most severe service conditions. it was designed far modern diesel engines equipped with Diesel Particulate Filter (DPF), diesel oxidation catalysts (DOC) and exhaust gas recirculation system (EGR). it is a diesel engine oil with outstanding performance that helps to extend engine life. Superior performance formula increases the efficiency of systems that reduce exhaust gas emissions such as DPF, DOC, EGR, and extend life. Outstanding thermal and oxidation stability prevents deposits at high temperatures and maintains performance during oil change intervals. The new generation of advanced additive technology ensures excellent protection even in heavy duty engines. Excellent fluidity in cold working conditions ensures fast lubrication of engine parts during first operation and protects engine against wear

it is a synthetic motor oil formulated with high performance additive packages. it can be used in gasoline and gasoline/electric hybrid vehicles. it provides fuel economy and long service life with excellent viscosity it provides extra protection against wear due to its special additives and it does not lose its performance in all operating conditions. Low temperature fluidity makes it easy to work in the cold. High resistance to molecular cut due to high viscosity There is no loss of viscosity. it prevents

Gloves with a high content of thermofibres (minimum 50%) especially designed to work in cold environments. They are suitable for handling cold objects, like when placing chilled food into refrigerating boxes. Category 1, minimum risk, CE EN 420

If you have experienced working in a cold storage or refrigerated warehouse, you know that labels made from standard label materials do not stick to the shelves for long. Oftentimes, the adhesive freezes before you’ve even had time to apply the label, rendering the labels useless. ONE2ID has a range of materials, especially suited to these challenging conditions, so you can be assured of long-term legibility of your freezer labels.

Ems99 has a well-known background in the marking of pharmaceutical and cosmetic products, such as blisters. For their creation, steel punches are proposed, cold worked, engraved and tempered. By working only with quality material, precision and durability are guaranteed. Punches can be customized according to different aspects: -measurements and shape of the punch; - font size; -type of print (straight or reverse view);

SS 301 is an austenitic Chromium-Nickel stainless steel capable of attaining high strength with moderate cold working. The combination of high strength and good ductility makes it suitable for numerous mechanical switches as well as surgical instruments, metal stampings and electronic and computer spring components.. The alloy is readily formed in the annealed temper. Ductility decreases with increased cold rolled strength but not to the degree that would occur with SS 302. It is not recommended for deep drawing. SS 301 can be welded by all conventional processed except oxy-acetylene. The weld should not make contact with electrolytes to prevent intergranular corrosion. SS 301 is resistant to atmospheric corrosion and is additionally resistant to mildly corrosive mediums. The combination of narrow strength bands and close thickness tolerance provided by Hamilton Precision Metals is the key to repeatable response characteristic in spring and switch applications.

Alloy 209 is a fully austenitic nitrogen strengthened stainless steel, having twice the yield strength and superior corrosion resistance at room temperature when compared to 316/316L or 317/317L stainless steels. This grade does not become magnetic when cooled to sub-zero temperatures or to a cold working process and has high resistance to sulphide stress corrosion cracking in both annealed and cold worked/ cold worked & aged form up to 30 HRc hardness. Please note that we have a minimum order value of £10,000.

Ti Grade 9 is a near alpha, alpha-beta alloy, sometimes referred to as “half-6-4.” It offers 20 to 50% higher tensile strength than the commercially pure titanium at room and elevated temperatures. It is much more amenable to cold working than Ti 6AI/4V alloy and can be cold worked 75 to 85% to result in moderately high strength and good ductility The alloy can be formed from the annealed temper. Severe forming may be aided by an intermediate stress relief. Stress relieving may be appropriate after severe cold forming to remove residual stresses. Weldability and corrosion resistance is very similar to commercially pure titanium. Welding should be performed with inert gas shielded arc or spot welding.Welding with active gases, coatings, or fluxes must be avoided to prevent embrittlement.

Welded and redrawn tube manufacturing employs elements of both the welded and seamless processes. A welded and redrawn tube is welded in a conventional manner but then transferred to our seamless mill, located in the same factory. Here the product is redrawn to achieve a welded and redrawn finish. The objective of redrawing is to achieve homogenisation of the weld following annealing by cold working. This refines the structure of the weld resulting in improvements that include: Better corrosion resistance Improved fatigue life Higher mechanical integrity Please note that we have a minimum order value of £10,000.

21Cr-6Ni-9Mn is a high manganese nitrogen strengthened, austenitic stainless steel. It combines high strength in the annealed condition, excellent resistance to oxidation at high temperatures as well as good resistance to lead oxide and a high level of corrosion resistance at ambient temperatures. The alloy can be fabricated and formed much the same as type 304 and 316, and is readily wieldable. It remains nonmagnetic after severe cold work. Please note that we have a minimum order value of £10,000.

Ti 3AI/2.5V (Titanium Grade 9) alloy is a near alpha, alpha-beta alloy, sometimes referred to as “half-6-4.” It offers 20 to 50% higher tensile strength than the commercially pure titanium at room and elevated temperatures. It is much more amenable to cold working than Ti 6AI/4V alloy and can be cold worked 75 to 85% to result in moderately high strength and good ductility. Furthermore, it is weldable as the commercially pure grades and has excellent resistance to torsion and corrosion.Ti 6Al/4V is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties excluding thermal conductivity, which is about 60% lower in Grade 5 Ti than in CP Ti. Amongst its many advantages, it is heat treatable. Please note that we have a minimum order value of £10,000.

AMETEK Specialty Metal Products uses a wrought powder metallurgical process to ensure the highest purity finished products. Our main strengths lie in the processing of Nickel, Iron and Cobalt containing alloys amongst other available materials. The processing of these materials begins with the consolidation of powder through a roll compaction process and followed by a controlled atmosphere sintering. Further reduction of the material is performed solely under cold working temperatures to reduce the introduction of non-metallics and annealing is performed under controlled atmospheres. AMETEK Strip Products are produced in ranges between .002” (0.05mm) and .080” (2.03mm) thicknesses in a full range of tempers and widths to 22” (558.8mm) while maintaining special capabilities to produce materials outside of these ranges for special applications. This process lends itself to the production of small but easily reproducible lots of highly specialized alloys

L-605™ is a nonmagnetic cobalt-based chromium-tungstennickel alloy that has excellent corrosion and oxidation resistance, and high strength at both room and elevated temperatures. Through work hardening, high strength levels can be obtained. L-605™ has a minimal heat treatment response, but can be used in the cold worked and aged condition. Applications include medical implant devices, springs, valves, and engine components for the aerospace industry. As a result of its high tungsten content, L-605TM is radiopaque, which is beneficial for implant medical devices, such as stents. Because of the alloy’s high work hardening rate, only minimal reductions can be taken before solution annealing will be required. L-605TM is very resistant to oxidation and scaling at elevated temperatures, and is nonmagnetic in all conditions. L-605™ is produced by vacuum induction melting followed by electroslag remelting (VIM-ESR), and as such, has a low nonmetallic inclusion level.

Ti 6Al/4V (Titanium Grade 5) is the most widely used of all the alpha-beta titanium alloys accounting for more than 50% of total titanium usuage. It is typically used in the annealed condition, at service temperatures through 400°C (750°F). Ti 6Al/4V is welded with matching or with ELI filler wire. Ti 6Al/4V is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties excluding thermal conductivity, which is about 60% lower in Grade 5 Ti than in CP Ti. Amongst its many advantages, it is heat treatable. This grade is an excellent combination of strength, corrosion resistance, weld and fabricability. In consequence, its uses are numerous such as for military aircraft or turbines. It is also used in surgical implants. Generally, it is used in applications up to 400°C to improve ductility and toughness in cold-worked condition. Please note that we have a minimum order value of £10,000.

HPM® 625 is a nickel-chromium-molybdenum alloy with niobium which is well suited for a wide range of severe corrosive environments. The alloy composition provides a product which performs well at elevated temperatures up to 1800°F. The strength can be increased by cold working. The alloy is readily formed in the annealed temper, and can be joined by the standard welding and brazing processes. Available Sizes: HPM® 625 is available from Hamilton Precision Metals as strip product in thicknesses from 0.001” to 0.025” (0.0254 mm to 0.635 mm) in widths up to 12.0” (304.8 mm). The material conforms to ASTM B443, AMS 5599 and UNS N06625.** **Hamilton Precision Metals can also supply product to AMS 5879 (UNS N06626) for demanding fatigue applications, which incorporates double melting, and restrictive limits for Carbon and Nitrogen.

Havar® is a heat treatable Cobalt base alloy that provides very high strength. The alloy has excellent corrosion resistance and is non-magnetic. Applications have included metal diaphragms for aerospace sensors, metal diaphragms for burst discs, power springs, gap spacers in magnetic heads, and target foils in nuclear physics. Forming cold rolled Havar requires large radius (90° Bend – 8 X thickness) prior to age hardening. The joining can be accomplished using both welding and soldering techniques.The ultimate endurance life is achieved by heat treating the alloy at 1000°F after 80% cold work. The alloy will retain 75% of room temperature strength up to 950°F (Figure 1). Available Sizes: Havar® is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005” to 0.025” (0.0127 mm to 0.635 mm) and widths to 7.5” (190.5 mm). A foil product is available in thicknesses down to 0.000060” and widths of 4.0” (101.6 mm). The material corresponds to UNS R30004.

HPM® 455 is a precipitation heat treatable martensitic Stainless Steel. The composition provides a good combination of corrosion resistance and heat treated strength favorable for fatigue applications. The material is well suited for demanding spring devices The alloy has reasonably good forming characteristics in the annealed temper considering that it has a hardness of RC30. A significant radius is useful when bending is necessary in a fabrication. Cold working prior to the precipitation hardening treatment can drive finish strength up to 270,000 PSI (0.2% offset yield strength). The alloy retains a good strength through 800°F (Approx. 70% of room temperature). Resistance to stress – corrosion cracking is optimized by heat treating at 950°F. The overall corrosion resistant to normal atmospheric is equal to SS 430 with no staining. The alloy can be welded by resistance and inert gas shielded techniques. It also is suitable for brazing using a flux when possible.

S20910 stainless steel provides a combination of good corrosion resistance and strength not found in any other commercial material available in its price range. This austenitic stainless steel has corrosion resistance greater than that provided by types 316 and 316L, plus approximately twice the yield strength at room temperature in the annealed condition. In addition S20910 stainless steel has very good mechanical properties at both elevated and sub-zero temperatures a well as outstanding cryogenic properties. And, unlike many austenitic stainless steels, 22-13-5 stainless steel can be heavily cold worked to enhance its yield strength and remain non-magnetic. Please note that we have a minimum order value of £10,000.

HPM® 600 is well suited for severe corrosive environments and is oxidation resistant through 2150°F. Such as, metal diaphragms for aerospace sensors, flexible metal foil heaters and metal diaphragms for burst discs. The strength can be increased by cold working. The material has good elevated strength retention through 800°F. The alloy is readily formed in the annealed temper, and can be joined by the standard welding, brazing and soldering processes. Available Sizes: HPM® 600 is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005” to 0.050” (0.0127 mm to 1.27 mm) and width up to 12” (304.8 mm). It is also available in foil as thin as 0.000100” (0.00254 mm) in widths of 4.0” (101.6 mm) maximum. The material conforms to ASTM B168, AMS 5540, MIL N 23228 and UNS N06600.

Our ability to strategically blend alloys allows us to offer specifically blended materials such as highly alloyed Nickel-Tungsten strip (NiW) for superconducting substrates. These custom alloys are available at customer-specified chemistries and cold work. The use of Tungsten in these alloys produces a flexible strip with preferred magnetic characteristics for superconducting wire. High Temperature Superconductors Our Nickel Tungsten substrate material is used in high temperature superconductors (HTS) to carry high-density electrical currents with very little energy dissipation. This property makes high temperature superconducting wire suitable for sectors such as power generation and transmission, electric motors, and high magnetic field generation. Nickel and nickel alloys are used as substrate materials because they are flexible to the thermomechanical processing of the wire making process.

SKOR OIL PREMIUM SERIES l0W/40 SL/CF SEMI SYNTHETIC is formulated with a combination of synthetic and premium quality base oils and advanced additive which is high-quality semi-synthetic multi-grade engine oil tor use in gasoline,LPG and diesel engines of passenger cars, small commercial vehicles, light trucks and vans with or without turbocharger. Properties Effective detergent and dispersant additives prevent deposit formation and keeps engine clean. Provides fuel economy by excellent viscosity control property. it forms extra protection layer against to abrasion by bonding to surface of engines with smart molecules that contains. it makes easy to work at cold weather by its viscosity. Approvals and Specifications API SL/CF VW 501.01 / 505.00 ACEA A3/B3-10 MB Approval 229.1 AVTOVAZ LADA cars

flexible gloves | 2mm strong | palms of hand are pimpled Ascan Flex | n eoprene gloves These gloves are not watertight but still the neoprene provides a good insulation against cold temperatures for those who prefer a sensitive grip. These high quality gloves originate from accessories of kite surfing but aswell perform perfectly for working in cold and wet environment. flexible gloves 2mm strong palms of hand are pimpled

Winter comes hand in hand with an increased risk of travel and slipping. Factors such as snow and ice on access roads and car parking areas increase the chance of accidents. Before the onset of cold weather, preparatory work should be carried out to reduce the risk of accidents in your areas caused by ice, snow, slippery surfaces, and freezing temperatures. Due to its physical and chemical properties, salt is used by service providers for thawing – de-icing roads (it can be spread in the form of saline) and as a non-slip agent in combination with sand. Coloricio has quantities and prices to satisfy any demand for such products. a naturally mined product that is 95% sodium chloride available in particles of different sizes for different uses it does not compact even when stored outdoors for a long time