Results for
SPRIMAG SPRITZMASCHINENBAU GMBH & CO. KG
Germany
coating machine with uv drying unit
Request for a quoteGSW SCHWABE AG
Germany
Special Reels are a longtime part of the GSW lineup Our Horizontal Reels (also called “Pallet Decoilers”) for instance, are helping to unwind lying coiled materials. They are best suited for thin strip which often is loaded together with the carrier pallet. GSW Tilting Reels make sense where normal coil loading is difficult or the materials don’t allow that process. Instead, the coil is loaded horizontally and uncoiled vertically afterwards. Paper Winders help to safely process paper interleaf or film coatings innovative expansion and clamping units help for quick and simple handling. Performance Data up to 3t coil weight and max approx. 2mm thickness max crosssection 300 x 2mm max winding or payoff speeds approx. 20 – 100m/min
Request for a quoteMALEKI GMBH
Germany
Versatile environmentally friendly repair mortar for concrete and masonry. For repair and coating work. Maleki-RM 500 is ideal for filling holes and cavities, especially on wall surfaces. Due to the rapid setting of the mortar, surfaces can be prepared quickly and cost-effectively for further coating work. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1416
Request for a quoteATON SERVICE
Ukraine
Filtering plant FTC-AS 6.Bd is designed for the complete set of machines for thermal metal cutting. Productivity – 6 000 m³/h. It is installed using modular panels, which provides a modular structure of the installation. The installation is made of 2 mm thick steel with subsequent powder coating. The fan unit is located in a noise-absorbing housing. Contaminated air containing waste particles obtained during production is transported to the filtering plant and the heavier particles in the settling chamber fall into the dust collection compartment of the unit, while the air containing small light particles is filtered in cartridge filters with a PTEF membrane . The installation performs fine filtering. Cartridge filters with a PTEF membrane provide fine filtration of air with a size of solid particles from 0.3 microns, the degree of air purification is 100%, which makes it possible to return purified air to the workshop.
Request for a quoteNITROXTEC ENDUSTRIYEL MAKINA BASINCLI HAVA VE GAZ COZUMLERI SANAYI TICARET LTD.STI.
Turkey
Deoxy Nitrogen purification units are devices used to separate nitrogen in the air from oxygen, carbon dioxide and other gases. The purification process is done by taking advantage of the differences between the molecular sizes and physical properties of the gases in the air. In the catalyst unit, palladium-coated alumina binds externally introduced hydrogen gas atoms. The remaining (1,000 ppm) oxygen gas molecules in the 99.9 purity nitrogen gas produced in the PSA generator combine with hydrogen gas on palladium alumina and turn into water, thus raising the nitrogen gas to an ultra-pure level. The water in ultra-pure nitrogen gas is dried with the help of a special desiccant dryer, and ultra-high purity 99.9999 (1ppm O2) nitrogen gas, purified from oxygen and moisture, is transferred to the systems. A special automation system is used to ensure the most efficient and minimal consumption of hydrogen gas used in the catalys.
Request for a quoteSOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
lead screw shaft sleeve one hole drilled in the side other hole drilled and tapped in the side, thread M6 end - outer diameter 30 mm, inner diameter 17 mm height 15 mm diameter of holes in the side: 5 mm material: carbon structural steel ASTM/AISI 1045 surface finish: black oxide coating unit weight: 50 g Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteTRELLEBORG
United Kingdom
The Dartex® Conductive range is widely used for applications where the prevention of static build-up is crucial, such as x-ray tables, medical scanners and operating theatres. The Dartex® Conductive range is designed with anti-static technology and tested for electrical resistance to BS2040/A.4.1. • Dissapates static build-up from medical diagnostic equipment, e.g. scanners and x-rays • Suitable for use in operating theatres • Maintains anti-static properties for the lifetime of the product Breathability – the moisture vapor transmission (MVT) properties of PU keeps skin cool and dry, unlike PVC which doesn’t ‘breathe’ Stretch & Recovery – essential for pressure redistribution and the prevention of avoidable pressure injuries Easily cleaned – either wipe clean or machine washable. Manufactured in the UK and USA, Trelleborg Engineered Coated Fabrics are: •PVC Free/Latex Free/Phthalate Free/Halogen Free FR •REACH & RoHS compliant
TRELLEBORG
United Kingdom
Designed for light to medium use healthcare applications, utilizing trusted Dartex® technologies for excellent barrier properties and pressure redistribution. A versatile polyurethane-coated fabric that is often used in a community setting, or for wearables such as x-ray aprons, Care provides the unique combination of Dartex® properties that are ideal for helping to minimize the risk of avoidable pressure injuries: Contact with skin requires a safe material Optimal Barrier against fluid ingress Vapour release to maintain healthy microclimate Extension prevents hammocking through sufficient stretch Reliable and designed for purpose to maximise lifetime Manufactured in the UK and USA, Trelleborg Engineered Coated Fabrics are: •PVC Free/Latex Free/Phthalate Free/Halogen Free FR •REACH & RoHS compliant •BS EN ISO 9001:2015 (FM 14842) certified •BS EN ISO 14001:2015 (SE006995) certified
TRELLEBORG
United Kingdom
Choosing a breathable, durable polyurethane-coated base ticking for your support surface is just as important as choosing a stretchy, pressure redistributing top cover. Trellelborg Engineered Coated Fabrics’ range of base ticking materials work in harmony with our top covers to provide the ultimate support surface. HIGH SLIP Low friction coating designed for ease of support surface movement. Use for: • Fall prevention • Easy transfer Designed to work with standard hospital beds to allow ease of movement between support surface and bed frame when the bed is articulating. Easy to slide mattress on and off bed frame. Manufactured in the UK and USA, Trelleborg Engineered Coated Fabrics are: •PVC Free/Latex Free/Phthalate Free/Halogen Free FR •REACH & RoHS compliant •BS EN ISO 9001:2015 (FM 14842) certified •BS EN ISO 14001:2015 (SE006995) certified
TRELLEBORG
United Kingdom
Choosing a breathable, durable polyurethane-coated base ticking for your support surface is just as important as choosing a stretchy, pressure redistributing top cover. Trellelborg Engineered Coated Fabrics’ range of base ticking materials work in harmony with our top covers to provide the ultimate support surface. LOW SLIP High friction coating designed to restrict support surface movement. Use for: • Fall prevention • Minimal patient movement Designed to work with standard hospital beds to restrict movement of mattress against bed frame when the bed is articulated. Additionally, this provides stability for the support surface on the bed frame. Manufactured in the UK and USA, Trelleborg Engineered Coated Fabrics are: •PVC Free/Latex Free/Phthalate Free/Halogen Free FR •REACH & RoHS compliant •BS EN ISO 9001:2015 (FM 14842) certified •BS EN ISO 14001:2015 (SE006995) certified
TEKNOVA PRINTING AND CHEMICAL INDUSTRY TRADE
Turkey
The Advantage is a revolution in the development of offset printing blankets for the printing industry. The characteristics of its unique construction, which is based on the cord carcass, brings outstanding advantages up to 30% saving in comparison with standard offset printing blankets in the printing process. Blankets designed with stable pre-carcass and optimum compressible layer construction for easy stripping on coating units. Also suitable for printing. PROPERTIES Gives even varnish film thickness with minimum pressure settings and optimum varnish transfer. Calibrated radial cord pre-carcass adds dimensional stability for precise register and reuse of blanket. Calibration of each blanket layer ensures deep stencil depth of min. 0,90 mm for cleaner profiles. Excellent flexibility for easier press mounting. Clean stencil cutting with sharp edges by hand or CAD. Easy peeling for quick, trouble free preparation.
Request for a quoteFORMEX MAQUINARIA
Spain
MACHINE CHARACTERISTICS: •Production line consisting of four stations: - Two automatic injectors. - One automatic dosing machine for chocolate coating. - Unit for spreading the topping on top of the coating. •A single urn keeps the injectors and the dosing machine heated, so that the product is kept at a stable temperature at which the dosing is smooth and trouble-free. •The line is no more than 5 metres long and can be operated by a single person at the start of the conveyor. •A double conveyor belt system moves the trays with the completed product to the start of the line. ADVANTAGES •High degree of automation in a small space, 5 metres. •Handled by a single operator. •Uniformity in the product.
Request for a quoteRIPPERT ANLAGENTECHNIK GMBH & CO. KG
Germany
Low investment costs combined with high flexibility. Manual powder coating booths Manual powder coating booths unite two considerable advantages: low investment costs and high flexibility. Care is taken during the design to ensure that the employees can work efficiently and ergonomically. Additional significant features are the ease of cleaning, good illumination and an optimised air budget. Rippert additionally offers the option to mount the powder coating booth on rails for long components. In this case the component does not move through the booth; instead, the booth drives along the entire length of the component together with the worker.
Request for a quoteMEDEK & SCHÖRNER GMBH
Austria
Multifiber coating and curing system for up to 12 optical fibers for inline operation Inline color coating and UV curing Coloring and UV curing up to 300 m / min Simultaneous coating of up to 12 fibersSuited for use in multifiber production lines operating at a maximum production speed of 300 m / minute and above. Coating unit with fiber entry guides, dust blower, and coating heads. Curing unit with one irradiator type M550, control electronics, cooling fan, and nitrogen flooding system including a nitrogen supply unit. FEATURES Simultaneous coating of up to 12 optical fibers. UV curing unit with one M&S designed irradiator. Suitable for production speeds of up to 300 m / min and above. Electrical heating system for coating heads. Pressure system for ink tanks.
Request for a quoteMEDEK & SCHÖRNER GMBH
Austria
Special high speed adapted ink jet printer with finely adjustable printhead support for marking bandmarks from one side on the fiber at speeds up to 1150 m/min. The usual arrangement allows bandmarking in line with the ink coating process, providing irradiator units after the ink jet printhead and the ink applicator. In case that no additional UV lamp unit and only the UV lamp of the UV curing unit CCD1-K unit is available, bandmarking has to be done in a separate process (either bandmarking or ink coating). The microprogram of the ink jet printer is specially adapted for ultra high speed bandmarking with automatic control of a constant bandwidth over the full speed range. Bandmark pitch and interband distance for multiple bandmarks (double, triple, etc.) are easily programmable on the computer screen. LD - INK LEVEL SENSOR AND INDICATOR SYSTEM FOR INK TANKS Triggers a warning signal as the ink level drops below minimum.
Request for a quoteREFRA, UAB
Lithuania
CO2 Light is perfectly suitable for small food retail stores or gas stations because of its small scale. It can provide up to 50 kW of cooling capacity, split between medium temperature and low temperature refrigeration. These rack systems are designed with reliable refrigeration technologies that are well tested and proven in the market. Assembled with maximum of 3 compressors on a welded frame, made of powder coated steel. GREEN SOLUTIONS | This unit is a part of Refra‘s environmentally friendly product group, as it is made using CO2 refrigerant. Such low GWP solutions are designed to have better efficiencies and capacities, as well as less environmental damage.
Request for a quoteREFRA, UAB
Lithuania
Wide range capacity liquid cooled condensing units, designed for commercial and industrial applications with the cooling capacity from10 kW to 40 kW. These units work on a principle of the heat rejection loop, where condenser heat is dissipated to the environment via water. Rejected heat can be used for additional needs in the same building, which gives these facilities additional economic benefits. These units provide an economical, compact alternative to traditional air-cooled condensing units. Built on an open welded frame with bent profile and powder coating, these condensing units carry a plate heat exchanger. Can be assembled with 1 to 4 reciprocating or scroll compressors with crankcase heater, a liquid receiver, refrigerant filters and a sight glass. Safety valve and pressure switches are added to increase the security of the unit.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ELTEX-ELEKTROSTATIK-GMBH
Germany
During printing and coating processes, so-called ink mist or particle mist arise in the outlet of doubleroll systems. This unwanted particle deposit results in lower product quality, high maintenance costs, increased ink consumption and the contamination of the environment. The formation of ink mist is very noticeable and annoying, particularly during coating and printing processes on substrates with non-absorbent surfaces (films, metalized substrates or composite films). A patented double-row DC plasma electrode is used to prevent this ink mist. This plasma electrode acts separately on both particle streams and ensures an optimal particle deposit. The electrode will be connected to the high voltage generator HSG61. The MISTING TACKER system is currently used for printing on metalized films and in silicone coating units (Wifag-Polytype).
Request for a quoteELTEX-ELEKTROSTATIK-GMBH
Germany
During printing and coating processes, so-called ink mist or particle mist arise in the outlet of doubleroll systems. This unwanted particle deposit results in lower product quality, high maintenance costs, increased ink consumption and the contamination of the environment. The formation of ink mist is very noticeable and annoying, particularly during coating and printing processes on substrates with non-absorbent surfaces (films, metalized substrates or composite films). A patented double-row DC plasma electrode is used to prevent this ink mist. This plasma electrode acts separately on both particle streams and ensures an optimal particle deposit. The electrode will be connected to the high voltage generator HSG61. The MISTING TACKER system is currently used for printing on metalized films and in silicone coating units (Wifag-Polytype).
Request for a quoteBRÜCKNER TEXTILE TECHNOLOGIES GMBH & CO. KG
Germany
Our ovens and line concepts for bonding and finishing of nonwovens stand for maximum production output, low energy consumption and highest precision regarding temperature distribution, air circulation and coating application. We can offer different application systems such like foam impregnation units, padders, spray cabinets, powder scattering units, coating heads and many others. In addition, we can offer complete lines like airthrough doublebelt thermofusion ovens, airthrough dryers for lightweight nonwovens, airthrough dryers for high speed spunlace lines for wipes or wetlaid nonwovens. Our customers are active in the fields of hygienics & medicine, construction & geotextiles, clothing & comfort, cleaning & care, automotive & transport, filtration and many more.
Request for a quoteOPTIMA LIFE SCIENCE GMBH
Germany
Unit to incubate the coated microplates Can be integrated with a line Stand-alone functionality First-in, first-out working principle (FIFO) Options: Incubator without climate control Incubator with climate control (temperature: 4–37°C, humidity: 40–90 % rH) Combined incubator / dryer (temperature: 4–37°C, humidity: 5–90 % rH)
ROTAKEM
Turkey
Technicial Specifications 1. Origin: Italy 2. Revision year: 2020 3.Machine cylinder quantity: 4 Pieces 4. Cylinder dimensions: 335x1000 mm 5. Bearings: Bronze 6.Cylinder on / off: Manual 7. Motor power: 45 kW 8.Cooling system: Watering, cooling from the core 9. Engine-gearbox transmission type: Direct coupled 10. Transmission between shaft transmission type: Flywheel gear 11. Arrangement of mills: L-type 12. Friction ratio: 1: 1: 1 13. Optional: - motor driver - Rubber feeding unit - Cloth feeding unit - Hooded cooler - Winder unit - Packaged nylon coating unit
Request for a quoteGERMANBELT SYSTEMS GMBH
Germany
germanBond® 4kP CFC-free Applications: Long lasting elastic adhesion with high firmness of PVC and Polyurethane for joining conveyor belts, lining reservoirs etc. By means of a one- or a two component(s) adhesive. As well as adhesion of various products made of plastic, rubber, textile, leather, wood and similar materials, together and one to another. By adding the binding material germanBond Hardener RFE, the gluing firmness, the resistance against heat, emollients and dampness and the adherence can be significantly improved. Specifications: Colour: colourless Hardness: germanBond® RFE Cleaner/Diluent: germanBond® CLP Flash-off time: approx. 2 min (at 20°C) Application quantity: ca. 150 g/m² per coat Packing units: 0.65 kg - 4.0 kg Downloads: Safety Data Sheet germanBond® 4kP - English [PDF] Safety Data Sheet Hardener germanBond® RFE - English [PDF] Application Instructions germanBond® 4kP - English [PDF]
Request for a quoteGERMANBELT SYSTEMS GMBH
Germany
germanBond® 4kR CFC-free Applications: 2 component contact adhesive free of chlorinated hydrocarbon and aromates for cold bonding of conveyor rubber belts, rubber linings, friction laggings for pulleys and rollers as well as for the permanent-elastic and high-strength bonding of rubber, fabrics, leather, polyurethane and other materials. Specifications: Colour: black Hardener: germanBond® RE Cleaner/Diluent: germanBond® CLR Flash-off time: approx. 10 min (at 20°C) Application quantity: approx. 150 g/m² per coat Packing units: 0.65 kg - 4.0 kg - 24.0 kg - 170.0 kg Downloads: Safety Data Sheet germanBond® 4kR - English [PDF] Safety Data Sheet germanBond® RE - English [PDF] Application Instructions germanBond® 4kR - English [PDF]
Request for a quoteGERMANBELT SYSTEMS GMBH
Germany
germanBond® 2kR Applications: 2 component contact adhesive non-inflammable for cold bonding of conveyor rubber belts, rubber linings, friction laggings for pulleys and rollers as well as for the permanent-elastic and high-strength bonding of rubber, fabrics, leather, polyurethane and other materials. Specifications: Colour: black Hardener: germanBond® RE Cleaner/Diluent: germanBond® CLT Flash-off time: approx. 10 min (at 20°C) Application quantity: approx. 250 g/m² per coat Packing units: 1.0 kg - 3.0 kg - 6.5 kg - 41.0 kg - 290.0kg Downloads: Safety Data Sheet germanBond® 2kR - English [PDF] Safety Data Sheet germanBond® RE - English [PDF] Application Instructions germanBond® 2kR - English [PDF]
Request for a quoteAVET GLOBAL CO.
Turkey
Flavors : Caramel And peanut / Coconut Bar -------------------------------------------------------------------- Cocoa Coated Nougat Bar With Caramel And peanut / Cocoa Coated With Coconut Bar -------------------------------------------------------------------- Unit Net Weight(g) : 50 g / Packaging : 24 x 6 / Units per shipper case : 144 / 40" Container Capacity : 3200
Request for a quoteKB BANYO SERAMIK
Turkey
Suara series by Alfiere Bagno Porcelain washbasin Porcelain coated MDF Bathroom Vanity Unit
Request for a quoteResults for
Coating unit - Import exportNumber of results
28 ProductsCountries
Company type
Category