Coated sleevings - Import export

Short work coat with long sleeves and straight cuffs. Made from cotton twill fabric with polyester for greater durability and resistance. Wide v shirt collar, comfortable and refreshing. Central closure with buttons and waistband with ribbon sewn on the back for greater comfort. Two front pockets and one on the left chest pocket keep everything accessible and highlight the brand. Personalization methods: embroidery and transfers Ideal for work clothes and uniforms.

Long-sleeved work coat with elastic cuffs. Made from cotton twill fabric with polyester for greater durability and resistance. Shirt collar with wide v-neck, comfortable and refreshing, and elastic rib cuffs that fit comfortably. Central velcro closure and waistband with ribbon sewn on the back for greater comfort. Interior pocket on the left chest to keep everything accessible. Personalization methods: embroidery and transfers Ideal for workwear and uniforms

Long-sleeved work coat with straight cuffs. Made from cotton twill fabric with polyester for greater durability and resistance. Shirt collar with wide v-neck, comfortable and refreshing. Central closure with buttons and waistband with ribbon sewn on the back for greater comfort. Two front pockets and one on the left chest like a patch to keep everything accessible and to highlight the brand. Personalization methods: Transfer Ideal for work clothes and uniforms.

secutex has developed the new “TopDrain” structure surface for lifting wet or oily components. Most of the damages at sharp or rough edges are caused by the movement of the load across the sling. In the case of loads with a “sharp edge” or with a very rough surface, a protective sleeve or fixed coating must be used to protect the textile lifting sling. If the load moves sideways, a cutting movement on the edge is the result. Similar to a knife blade, the edge can cut through the fibers of the textile sling. The new “TopDrain” surface drainage provides good adhesion of the protective sleeves and the coated lifting slings even on wet and oily materials. The liquid can drain off into the surface hollows and the load lies securely in the lifting sling. The “TopDrain” structure works like a drainage and ensures the frictional connection of the secutex coating to the load.

The secutex protective sleeve is optimally coordinated from a technical standpoint for the spanset lashing belt programme or the spanset round slings. The contact side is coated with secutex. It is extremely resistant and minimizes the buildup of wrinkles in the textile. The secutex protective sleeve with singlesided coating can be easily pushed over lifting equipment and protects against damage caused by “sharp edges” and the rough edges of the lifting equipment and the load at the same time.

In the domain of adhesive film and paper production, several techniques can be applied for primer and finish coating. Hannecard supplies rubber, as well as polyurethane roller coverings suited for both water and solvent-based coatings. Depending on the process, the pick-up, transfer or back-up roll can be elastomer coated. All qualities mentioned below are also available in antistatic versions.

Hexagon nut with locking ring DIN-EN-ISO 10511 (old standard DIN 985) Strength class 8 Material: C1035 steel Coating: galvanized Sleeve: Nylon Thread: metric, normal, accuracy class - medium (6H) The main purpose is the fastening and connection of assemblies and parts together with bolts, screws and other fasteners in mechanical engineering and construction. The plastic ring prevents the nut from unscrewing spontaneously, and also ensures the tightness of the thread.

Our coated protective sleeves will convince you with performance.

PRODUCT DETAILS -Our product is cashmere fabric. -All materials to be used in the product are of higher quality than their equivalents. -Our product's lining is satin. -Metal materials (zipper, buckle, snap) used in our product comply with ISO standards. -The fur that used in our product is Finland fox on the jacket can be removable CARE AND STORAGE CONDITIONS -Product length should be stored in a shoulder-shoulder strap. -It should not be stored in a stout way. In case of obligatory folding, the lining side of the jacket should be folded. -Our product should not be washed in a washing machine. - If the jacket is wrinkled, it can be ironed with a hand iron. It should be ironed in irons in dry cleaning shops. -If the product gets wet, it should be kept in a room and left to dry. It should never be subjected to a heat source.

KB RollerTech processes seamless metal belts (stainless steel and nickel). Compared to coated plastic belts, metal belts offer the following advantages: very high thermal conductivity very high physical stability Today, KB RollerTech processes metal belts with the following properties: Properties Nickel belts Stainless steel belts Length < 350 mm < 400 mm Diameter 15 - 50 mm 10 - 100 mm Wall thickness 30 - 500 µm 35 - 100 µm Geometry straight straight and concave Remarks 100 mm diameter only possible with seam Concerning the coatings the following combinations are possible: Nickel belts Stainless steel belts PFA sleeves PFA spray coatings or PFA sleeves Silicone and PFA sleeves Silione and PFA spray coatings or PFA sleeve

The requirements: homogenous and fine-pored cell structure tight tolerances of silicone foam density defined concave or convex surface shape non-stick top coatings (e.g. PFA sleeves) minimal odor through reduction of volatiles (VOC)

This machine technology developed for coating round steel tubes with a temporary corrosion protection convinces with its high performance. The surface quality of the solvent free coating with 100 % UV lacquer, the fast curing time of ≤ 1 second as well as an overspray recovery rate of more than 95 % are impressive features which, by their very nature, offer high economic efficiency. Additional modules individually perform either the cleaning work, dust removal or marking of tubes. This machine technology ensures perfect transport of the tubes without damage to the lacquer coat, while flexibly taking tube properties into account, such as sleeves or caps, diameters from 20-200 or from 200 to 500 mm, required throughfeed speeds of 30 - 100 m/min as well as surface temperatures from +1°C to +40°C. Whether operated as an individual machine or integrated in an adjustment line, the output parameters are characterised by minimum space requirement and low operating and maintenance costs. An alkaline cleaning station that adjusts to the individual degree of soiling of the tube surface to ensure optimum results can be optionally installed together with a drying unit upstream of the pipe coating line. Venjakob offers individual system solutions for coating tube sleeves. This includes the application of a base coat and coloured rings, as well as marking. Customised solutions for tube marking are available as an option.

Tech Bridge® Hard has an ultra high strength composite core complemented by a fiber-reinforced outer shell, which makes it suitable for high speed printing. Tech Bridge® Hard is available with a separate air connection or as air-through. This high quality Hard Coated Bridge Sleeve is suitable for all plate sleeves. More details about Tech Bridge® Hard is available on our website.