Closing systems - Import export

They are facade claddings made of solid panels that are impermeable and do not show the interior. The coating texture can be started from below the raised floor and continued up to the desired level.

Machine is made of plexi products that close around it. The machines are protected within the scope of occupational safety for security purposes. The system has the feature of stopping itself when the cover is opened by putting a cutter switch where necessary. Safety shutdown can be done for every machine It is projected according to the machine condition. Aluminum and transparent and colored plexi production can be made according to the stop. It is guaranteed for 2 years against factory faults.

The high-performance sewing machine from STATEC BINDER stands for precise and reliable bag sealing of woven PP, paper or PE bags. Two different variants can be used for sewing the bags. On the one hand there is the straight-line bag infeed, in which the bag is fed to the sewing head by means of a belt drive and then sewn at the upper end. The second variant is the bag edge folding, in which the bag is folded at the upper end when it is pulled in and then sewn. In order to change from one system to the other, it is only necessary to replace a simple device. The bag to be sewn is fed to the sewing machine via one of the two variants mentioned above. Depending on the sewing speed and performance, the stitch length is between 7 and 12 mm. A cutter at the end cuts the thread. The sewing head is driven by a motor with frequency converter. A big advantage over the drive via belt pulleys is a more precise adjustment of the speed.

The patented bag closing system “Over Tape Bag Sealer” from STATEC BINDER seals woven polypropylene (PP) bags airtight. A woven PP tape is used for a reliable and secure closure. If necessary, the bags can also be sewn. Both pillow bags and gusset bags can be securely closed. This sealing technology facilitates the handling of dusty and odour-intensive products of the food and feed industry. During operation, the filled bags are transported to and from the bag closing system via a conveyor belt. A sensor detects the position of the bag and automatically puts it into the trimming area. After cutting the top edge of the bag a woven PP tape is applied over the open edge of the bag to seal it with hot air. The hot air to seal the bag airtight and odourless is produced by a heating unit in the machine.

Telescopic actuator with a synchronized toothed belt system for effective linear movement and minimal overall dimensions. The compactness of the closed system makes it ideal for environments without much space between the machine and the ceiling. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.

» Opening possibilities Side hung of 1, 2, 3 & 4 sashes Bi-fold Slider » Closing Possibilities Fixed or adjustable louvres Opaque closing (panel sandwich) Glazed closing » Sections Frame 47 mm Sash 40 mm » Profile thickness Window 1.3 mm Door 1.5 mm » Maximum dimensions/sash Side hung Width (L) = 1600 mm Height (H) = 2500 mm » Counter-window system » Fixed or adjustable louvres » Opaque closing system (sandwich panel) » Allows for glazed closing Bi-fold Width (L) = 700 mm Height (H) = 2500 mm Slider Width (L) = 2000 mm Height (H) = 3500 mm Please consult regarding maximum weight and dimensions for other opening types » Maximum weight/sash Bifold 50 kg Side hung 65 kg Slider 120 kg » Finishes Powder coating / Anodised

One particular challenge in the refrigerator recycling process is presented by chlorofluorocarbons such as R 11, R 12 or R 141b, which were used for decades as foaming agents for insulation materials. Since these substances damage the Earth’s ozone layer when released, they must be removed and collected securely in a closed-system pre-processing plant. With ERDWICH, you are assured of the latest, technologically advanced solutions: Whether you’re handling small-scale units or complex refrigeration plant: utilise the expertise we’ve gained in processing over 30 million refrigerator units. To get an idea of what we’re capable of, please see the following Case Studies. Now it’s your turn: we look forward to receiving your project enquiry!

Several million scrap refrigerator units are disposed of every year in Germany alone. The proportion of refrigeration units recycled by volume totals about 40% and is the most significant segment after consumer electronics. One particular challenge in this recycling process is presented by chlorofluorocarbons such as R 11, R 12 or R 141b, which were used for decades as foaming agents for insulation materials. Since these substances damage the Earth’s ozone layer when released, they must be removed and collected securely in a closed-system pre-processing plant. The fact that pre-processing of legacy refrigeration units always needs to be carried out in accordance with the latest technological standards means that plant operators gain a decisive advantage when working with an innovative and experienced plant manufacturer. With ERDWICH, you are assured of the latest technologically advanced solutions – even for the most demanding and safety-conscious refrigerator recycling. The...

TABLETOP VACUUM MACHINE - 1 FRONT BAR LENGTH 450 mm Professional bench vacuum machines in stainless steel, which can be set from the panel with 10 customizable programs. Through the convenient display it is possible to view the various parameters of the vacuum. The display shows the need for oil change with a special message. An electronic sensor of last generation detects the degree of vacuum obtained inside the chamber. All FPMV models are endowed with a safety system against the risk of sealing bars overheating. Vacuum capacity is 99,9%. Available models: FPMV 45 1BF - 1 450 mm front bar - 20 mc/h vacuum pump - without gas FPMV 45 1BFG - 1 450 mm front bar - 20 mc/h vacuum pump - with gas Only when ordering is it possible to request the integrated printer for printing an adhesive label showing the packaging data.

Impulse sealer with mechanical pedal and floor support for the closure of bags in plastic material heat-sealable, impulse sealing (resistance to heat for a few seconds) and timer for adjustment. At the end of the sealing is possible to trim the bag with the cutter installed on the bar. The open structure also allows you to install a coil on the back of the machine and to obtain envelopes of the desired length using the tubular film. The sealing head can be tilted up to 45 ° to allow the closure of the envelopes containing liquids or powders. Maximum thickness of 0.15 mm sealable . (0.30 mm. Overall)

With our recooling systems we provide a closed loop system that doesnt need any fresh water, has no corrosion issues and doesnt release sewage water, all whilst keeping your induction heating system reliably at ideal working temperatures for 24/7 operation.

Balcony Closing Systems with Glasses is the most modern way to create an aesthetic and functional balcony for your home. It is a system which provides best solutions for seasonal changes since the glasses can be folded and gathered in the same place. Therefore, you can enjoy your balcony as you never close them in the warm weather conditions. It protects from the outer factors in the bad weather conditions such as windy and rainy weathers. Our company sales the folding glass systems with the most affordable prices wholesale.

It is special high performance oil that is formulated to be used in lubrication processes of closed gear systems such as industrial gear systems (reducers), and that provides operation easiness under excessive load and pressure.

Pneumatic cylinder RI with a closed oil circuit system to regulate the travel speed when retracting and/or extending. Also with skip and stop function.

In the tried-and-tested, gasketed design, the EC-series offers many benefits to the user on top of its ease of operation. Due to the internal drainage, use in even the most hygienically clean areas is possible. The press lock is performed by an automatically self-regulating pneumatic/hydraulic closing system. The automatic closing pressure maintenance ensures that the plate pack always remains closed. An adjustable pressure switch with a potential-free contact is provided for integration into the customer's control system. This prevents the feeding pump from running uncontrollably. Also, as with all AQUACHEM filter presses, the discharge manifold can be generated here at the customer's request. Due to the gasketed design, the seamless backflushing of the filter media in the filter press is possible. The filter press frame is phosphated and powder-coated, offering a high level of protection against external influences.

It is special oil that is formulated to be used in heating systems operating with oil, and requiring heat transfer such as those in nutrition, plastic, building materials and dye industries. It prevents oxidation in hot conditions and thus avoids residue formation thanks to its high thermal stability. Its evaporation loss is low. It provides operation easiness by performing easy circulation under low temperatures. Safe usage temperature: Closed systems: max 320 °C, Open systems: max 200 °C Specifications regarding applications set forth by manufacturer should be followed.

Adjustable Compression Force max. 1,800 N Stroke 50 mm High quality and long service life: The HB model of hydraulic damper can also be used as single or double acting brake. Its coated body in a slim gas spring design and the piston rods with wear-resistant surface coating are features of high quality and long service life. The maintenance free, ready-to-install and closed systems provide a constant feed rate and are adjustable, and the control segment on the piston makes adjustment at the end position child’s play. Thanks to many add-on components the assembly is easy to mount, so that the damper can be universally deployed for damping back and forth swinging masses, such as in power or free conveyors.

Adjustable Compression Force max. 180 N Stroke 10 mm High quality and long service life: The HB model of hydraulic damper can also be used as single or double acting brake. Its coated body in a slim gas spring design and the piston rods with wear-resistant surface coating are features of high quality and long service life. The maintenance free, ready-to-install and closed systems provide a constant feed rate and are adjustable, and the control segment on the piston makes adjustment at the end position child’s play. Thanks to many add-on components the assembly is easy to mount, so that the damper can be universally deployed for damping back and forth swinging masses, such as in power or free conveyors.

Recycling plastics with the Sorticanter include: ► Reduced odor because of closed system ► No influence due to the color of the solids to be sorted ► Lower thermal energy consumption, since the dewatering phase is already built into each Sorticanter. ► Minimum personnel costs, creating operating cost savings  ► Separation of mixed substances that are unsuitable for static separation (fibers) This means that no mechanical dryer (screen centrifuge) is needed. ► Processing of particles possible that are smaller than 1 mm, so no impact from fans and other interfering effects ► A low-volume circulation system reduces the consumption of fresh water, while also reducing the wastewater quantity, since contaminants are largely separated out in the Sorticanter. With a Sorticanter, it is possible to process up to 1,000 lbs or 2,500 kg of solid per hour, depending on the composition of the raw materials.

Adjustable, Without Free Travel Compression Force max. 50,000 N Stroke 100 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

Adjustable, Without Free Travel Compression Force max. 10,000 N Stroke 100 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

Adjustable, Without Free Travel Compression Force max. 6,000 N Stroke 50 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

The tempering operation includes heating and cooling stages in order to provide compression stress to the exterior surfaces and indirect tensile stress to the middle area of the glasses on the horizontal line. The full-tempered glasses are 5 times more durable than the glasses without any kind of operation. When they got broken, they scatter as partial pieces like really small ice particles not as big pieces. Those scattered pieces are expected to create less damage than the float glasses scattered completely. The tempered glasses which are also known as hardened glasses are a type of safety glasses. The tempered glasses are used for the areas where the glasses are expected to be broken hard and not to harm consumers when they are broken such as front glasses for the buildings, appliance glasses, automotive sector, shower cabins and bath-tub glasses, furniture glasses, railings, banisters, glasses for balcony closing systems.

It is special high performance oil that is formulated to be used in lubrication processes of closed gear systems such as industrial gear systems (reducers), and that provides operation easiness under excessive load and pressure. It provides effective protection in gears operating under excessive loads because of excessive pressure additive in its formula (EP). It prevents corrosion. • It minimizes friction. • It has a high resistance against rust and oxidation formations.

The TF3000 combines the Turbomat T3000 and the intensive cooling system IK3000 in a single closed system. This means one thing most of all Best output per chamber part for the shortest process times. The automated transport system not only reduces operating costs, but also increases production capacities in the system. Maximum output per chamber part Production justintime, controllable and reproducible processes Much lower germ formation and contamination – for longer durability Automatic transport system Producing, packaging and delivery in a very short time Lesser demand of cold storage capacities Higher trolley capacity as comparable floor conveyor systems by low construction

The TFi3000 Autovent is a true efficiencywonder! The patented procedure for lowpressure steam cooking without any fans at all, in combination with automated work processes, reduces the operating costs to a minimum. Cooling of the products in the closed system, directly subsequent to heat treatment, also ensures ideal hygiene conditions and increases durability. Production justintime, controllable process with reproducible work processes Automatic transport system Much lower germ formation and contamination – for longer durability Short cooking times and weight loss reduced by up to 15% Temperature difference across the system no more than 1 °C Uniform products at maximum quality due to turbulences and air velocities up to 200 m/s Very low maintenance and operation costs thanks to dispensing with fans Long service lives due to stainless steel construction and steamtight welding allround

From 8 to 72 Modules Ergonomic opening / closing system Precise design with blank or smoked door Operating Temperature; -25 to +60C Hinged door which opens more than 180° Ready to install the terminal blocks for neutral and earth connection

Easy Tape Box Sealing Machine The Easy Tape Sealing Machine is semi-automatic and equipped with an energy saving system. Roller conveyors and a closing system with 3 flaps for the perfect closing of the box make this machine the right choice for any use. Touch the top and bottom of the box with PP tape | PVC | CRAFT. The Easy tape 50 SB box sealing machine seals the bottom and top of the box with self-adhesive tape. It is equipped with a closing system with 3 flaps to facilitate the closing operation. The machine can be used by non-specialized operators, because it requires very simple adjustment operations. The sealing of the box takes place by means of two lateral actuation belts (actuated by two motors), ensuring maximum uniformity. The result is a perfect alignment of the flaps and therefore an optimal seal, which is achieved by the high-performance soldering heads.

Performant 88 Premium offers you everything you need for a high quality residential door: exceptional design and chromatic variety due to aluminium plating, the best thermal insulation for this type of profiles, modern construction depth of 93.5 mm, more resistance at weather and burglary due to the 52 mm panel. PVC 6-chamber aluminium plated profile, with a constructive depth of 93,5 mm Maximum size for doors with one leaf 1100x2200 mm Gaskets: 2+1 Wide range of glass or panels with a standard thickness of 52 mm Glass package rod: Aluminium or Warm Edge Increased security due to the closing system with boltsand hooks. Possibility of installing automatic closing systems You can order these doors in a variety of constructive options: in one or more leaves, with skylights or side panels, with glass or decorative panels. Colours: white, wood textures, mate, metallic colours or bicolour (RAL range on the outside). Glass options: burglar, secure, variety of frosted and decorative glass.