Closed circuit systems - Import export

Pneumatic cylinder RI with a closed oil circuit system to regulate the travel speed when retracting and/or extending. Also with skip and stop function.

The shrink tunnel, equipped with temperature adjustments, height and speed, is incorporated in order to make the machine compact and versatile, suitable for series production. The welding time is electronically set and the absence of fumes is ensured by teflon-coated blades. The sealing bar motorized, equipped with security system, the closed circuit cooling plant and motorized scrap-winder, are part of the standard equipment of the machine. FEATURES Digital panel with 6 programs Descent sealing bar manual or automatic Discharge conveyor for product Legs with locking wheels Only welding and welding + retraction Sealing bars with closed-circuit cooling system and patented safety system Emergency switch Teflon coated sealing bars Electromechanical automats Welding speed automatic controller Motorized conveyor belt with adjustable height Motorized scrap-winder Air flow shrink tunnel swiveling Adjustable temperature with electronic temperature controller

Housing fibreglass reinforced thermoplastic polyamide. Sight glass thermoplastic polyamide. O-ring and flat seal NBR. Reflector PVC. Float plastic. Screw and nut, steel. Version: Housing black. Sight glass crystal clear, high mechanical stability, non-ageing. Reflector white. Float red, with magnetic element. Screw and nut electro zinc-plated. Note: The oil level gauge not only enables the oil level to be viewed but also recorded using a REED switch. In addition, the oil level gauges can also emit an electric signal if the temperature of the liquid inside the container reaches the threshold of 70 °C. As soon as the float element approaches the selected minimum value after the circuit has been closed, the system emits an electric signal. The sensor is located on the housing and its height can be adjusted in line with the control requirements for the oil level. The minimum level is ca. 35 mm from the centre of the lower fastening screw.

Automatic Divider Machine Specifications Weight adjustment by touchscreen panel • The main body is made completely of stainless steel. • Dough counting screen • Electronic speed control unit • Dough twicing system on the conveyor band. • Drum surface chrome plated. • Piston slot is made of stainless steel. • Vacuum piston is made of anti-oxidation materia Manuel Dividing Machine Specifications Weight adjustment by hand wheel • The main body is made completely stainless steel • Drum surface chrome plated • Piston slot is made of stainless steel. • Vacuum piston is made of anti-oxidation material. • 24 V Control board • Closed circuit lubrication system. • Piston movies to discharge position automatically when the machine shut-off • 70 kg. hopper capacity • Stainless steel lids. • Belt/pulley power transmission system Option Single or double piston 50-200, 100-600 and 250-1000 gr dividing range Manual and touchscreen control panel Teflon coated hopper Big sized hopper (140 lt dough capac

Technicial Specifications: 1. Revision year: 2020 2.Cylinder diameter: 660 mm 3.Cylinder length: 2130 mm 4. Roller opening range: 1-15 mm 5. Motor power: 200 kW 6. Engine-gearbox transmission type: Direct coupled 7.Transmission between gearbox and mills: Flywheel gear 8. Bearings: Bronze 9. Lubrication: Automatic 10. Cooling system: Closed circuit water cooling system with rotary joint 11. Visor: Fixed 12. Brake system: - 4 emergency stop buttons - 2 emergency stop bars - 2 emergency stop pedals - Return - Engine brake - Automatic on / off 13. New chassis 14. Mills grinded 15. New electrical and control panel 16. Optional: - Stock blender - Motor driver *** All pictures are before revision

Variable displacement axial-piston pumps in swashplate design are intended for hydraulic actuators combined of pump and motor, operating in closed circuit systems. Operate in stroke of mobile machines – harvesters, concrete mixers, paving compactors and other.They are used for driving mobile machines, like combines, or rotating technological equipment, like transit mixer drums, etc. Axial-piston pumps are easily controlled and relatively compact. Pump flow is directly proportional to the cylinder block speed and displacement varied with the swashplate position. Flow direction is reversed with a tilt of the swashplate in either of the opposite directions from its neutral position.

Our quality SANHA ball valves are made of brass CW 617N and can be delivered in a multitude of versions such as with threaded and press ends, or in the dimensions 15-54 mm, 16-26 mm and ½" to 2". The ball valves can be easily and quickly combined with all SANHA systems, thus providing a real alternative to conventional products. With SANHA ball-stop valves we provide our customers with the oppurtunity for an optimal safe and at the same time very economical solution for the installation of machinary, equipment or other facilities such as risers.

Our quality SANHA ball valves are made of brass CW 617N and can be delivered in a multitude of versions such as with threaded and press ends, or in the dimensions 15-54 mm, 16-26 mm and ½" to 2". The ball valves can be easily and quickly combined with all SANHA systems, thus providing a real alternative to conventional products. With SANHA ball-stop valves we provide our customers with the oppurtunity for an optimal safe and at the same time very economical solution for the installation of machinary, equipment or other facilities such as risers.

Our quality SANHA ball valves are made of brass CW 617N and can be delivered in a multitude of versions such as with threaded and press ends, or in the dimensions 15-54 mm, 16-26 mm and ½" to 2". The ball valves can be easily and quickly combined with all SANHA systems, thus providing a real alternative to conventional products. With SANHA ball-stop valves we provide our customers with the oppurtunity for an optimal safe and at the same time very economical solution for the installation of machinary, equipment or other facilities such as risers.

Our quality SANHA ball valves are made of brass CW 617N and can be delivered in a multitude of versions such as with threaded and press ends, or in the dimensions 15-54 mm, 16-26 mm and ½" to 2". The ball valves can be easily and quickly combined with all SANHA systems, thus providing a real alternative to conventional products. With SANHA ball-stop valves we provide our customers with the oppurtunity for an optimal safe and at the same time very economical solution for the installation of machinary, equipment or other facilities such as risers.

Our quality SANHA ball valves are made of brass CW 617N and can be delivered in a multitude of versions such as with threaded and press ends, or in the dimensions 15-54 mm, 16-26 mm and ½" to 2". The ball valves can be easily and quickly combined with all SANHA systems, thus providing a real alternative to conventional products. With SANHA ball-stop valves we provide our customers with the oppurtunity for an optimal safe and at the same time very economical solution for the installation of machinary, equipment or other facilities such as risers.

Our quality SANHA ball valves are made of brass CW 617N and can be delivered in a multitude of versions such as with threaded and press ends, or in the dimensions 15-54 mm, 16-26 mm and ½" to 2". The ball valves can be easily and quickly combined with all SANHA systems, thus providing a real alternative to conventional products. With SANHA ball-stop valves we provide our customers with the oppurtunity for an optimal safe and at the same time very economical solution for the installation of machinary, equipment or other facilities such as risers.