Results for
PEKU FOLIEN GMBH
Germany
Cleanroom bags and films - low-particle cleanroom bags and cleanroom films for research, pharmaceuticals, medicals Highest quality standards according to DIN EN ISO 14644, ISO 7, ISO 5 are fulfilled.
Request for a quoteSTARLIM SPRITZGUSS GMBH
Austria
A clean room is a controlled environment used for the production of very clean parts. starlim//sterner owns a clean room that meets the requirements of the following standards: ISO 14644-1 class 7 & 8 (defines the number of particles in the air) and GMP class C or D (defines the number of germs in the air). These silicone and 2-component parts are produced for the medical and the pharmaceutical industry. We also produce small and miniature parts for the automotive industry . The clean room incorporates the complete manufacturing process such as injection molding, post curing, washing and packaging of the molded parts. SHARE:
Request for a quoteROLLON GMBH
Germany
International patent registered for the CLEAN ROOM SYSTEM line (DIN EN ISO 14644-1) The CLEAN ROOM SYSTEM units are linear actuators with belt driven transmission and are specifically designed for Clean Room applications They are supplied with a certificate issued by the IPA Fraunhofer Institute in Stuttgard, which certifies compliance with class ISO 3 (DIN EN ISO 14644-1), or with class Fed Std 0.01 (FED 209 E). The system prevents particles from being discharged in the environment where the linear unit is located. This has been achieved by using a special straight seal that closes the horizontal opening where the slider moves, as well as by the operation of a 0.8 vacuum pump connected to 2 vacuum pipes located inside the drive head and the idle head. The system allows vacuum to be generated inside the unit so that any particles released when the system is operating are sucked towards the air filtration areas. Clean Room System linear actuators components are all made of...
Request for a quoteLT ULTRA-PRECISION TECHNOLOGY GMBH
Germany
We have been manufacturing UP machines / components and beam delivery systems for over 20 years.Benefit from our experience and let us do your demanding assembly or adjustment work.Assembly / adjustment of optical systemsAssembly / adjustment of mechanical precision systems.cleaning.Clean room assembly.Functional test.
Request for a quoteGDI CORPORATION
Bulgaria
ISO 14644-1 certified cleanroom with class 8 air cleanliness constructed by market-leading air system and cleanroom suppliers. We offer manufacturing of medical plastic bottles/components to packaging without human contact.
Request for a quotePRESSTECK S.P.A.
Germany
Pressteck is one of the world's leading specialists for deep-drawn individual parts on transfer presses and their processing into assemblies. In this non-cutting tension-pressure process, we produce hollow parts from a metal strip in several stages, which can be aluminium, stainless steel, copper or brass, among others. Compared to other processes, deep drawing has decisive advantages: Material consumption and production costs are lower, and at the same time the strength of the components is higher. We are highly innovative and optimise deep drawing technology beyond what is currently possible. We manufacture your individual component from coiled sheet metal and master demanding geometries and high degrees of forming.
Request for a quotePRESSTECK S.P.A.
Germany
Pressteck has all standard sizes of MDI containers in its portfolio: 10ml, 14ml, 17ml and 19ml. If you need other sizes due to individual requirements, we are happy to offer these as well. Pressteck has all standard sizes of MDI containers in its portfolio: 10ml, 14ml, 17ml and 19ml. If you need other sizes due to individual requirements, we will be happy to offer you these as well. Depending on the medication and the propellant (CFC or HFA), different materials are used. We produce our containers from aluminium and stainless steel. While stainless steel containers are usually used uncoated, aluminium containers can also be offered in a coated version. Our containers are used as primary packaging for the administration of aerosol medication by inhaler. Patients worldwide use MDI (metered-dose inhalers) to treat respiratory diseases such as asthma and COPD.
Request for a quotePEKU FOLIEN GMBH
Germany
PEKUWhite - Our low-particle cleanroom films and cleanroom bags, tuned to your needs in the pharmaceutical, medicals, laboratory sector. The cleanroom packaging fulfils the highest quality standards.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
The Multilift II clean has now been added to the range. It has been deliberately developed for use in the clean room. A special shroud for the DC motor with brushes of the lifting column means discharge of particles is kept to a minimum. To verify its suitability for use in clean rooms, the Fraunhofer Institute for Manufacturing Engineering and Automation IPA carried out a particle emissions test as per DIN EN ISO 14644-1 and certified the lifting column for use in clean rooms up to a globally valid class 4.
Request for a quoteBÜRKLE GMBH
Germany
The sampling bag SteriBag Cleanroom with double packaging can be placed directly in the clean room. 25 sample bags are placed in double secondary packaging. They can be removed one after the other and are therefore ideally suited for introducing into the clean room. Then the sterile bags can be used directly in the clean room. SteriBag Cleanroom is sterile inside and outside. This guarantees contamination-free storage and transport of solid, semi-solid and liquid media. The sample bag is perfect for use in chemical and pharmaceutical applications. The disposable sample bag has a labelling field, saves space and is also easy to transport. The large bag opening makes it easy to pour in the sample.
Request for a quoteBÜRKLE GMBH
Germany
At a glance • PS, white • Optionally packaged individually and sterilised • With stripper edge • For single use • Clean room manufactured (clean room class 7) • Complies with EU food requirements and FDA regulations Volumetric and dosing spoons can be used to measure small amounts of powder, granulates and liquids exactly and dose them precisely. For precise measuring, excess medium is stripped off the upper edge of the spoon. The content volume is engraved on the handle. The flat front edge of the volumetric spoon is ideal for picking up medium from the bottom of the container or for getting into the corners of the container, thus allowing for good emptying of small remaining amounts. The flat base makes it possible to set the volumetric spoon down without spilling the content. The disposable dosing spoon is suitable for use as a sample spoon for taking small sample quantities.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
For removing dust prior to maintenance and repair work, e.g. on magnetic plates, reading heads, audio-visual magnetic tape recording and playback heads, phonograph pick-ups, record turntables or phonograph records For cleaning vacuum sealing surfaces, sealing rings, high-voltage insulators, sample containers etc. For vacuum systems and device groups under clean-room conditions for semiconductor production Cleaning of opto-electronic reading units for bank checks and contactless cleaning of optical devices For maintenance of automated teller machines, quartz clocks or display panels For dedusting precision mechanical parts and assemblies in office machines, copiers, fax machines etc. Advantages and benefits Excellently suited for dedusting, blowing out and blowing off dust and liquids of all kinds Dry, oil-free compressed gas leaves behind no residues Replacement for ultrapure compressed air
Request for a quoteMEDICCLEANAIR
Belgium
Pre-filtration filters on the outside of the unit Indoor work leads to an increased concentration of aspergillus. In order to protect the high effiency particulate air filter inside the unit during building activities, pre-filtration frames with filters are added to the outside of the device. The life-time of the high efficiency particulate air filter inside the unit is therefore largely extended. The prefilters are supplied in packages and are easily changed.
Request for a quoteBSAFESOLUTIONS
Portugal
Cirurgical Tipe IIR Mask – CORRIGIR PARA : Surgical type IIR Mask We are manufacturs one of the bests disposable mask in the market.Our Type IIR mask is +98 % bacterial proof and provides the best barrier to the user. Our productive facilities own the most recent and advanced technologies and all production is carried out accordingly to the highest international compliance standards for equipments and devices. We assure maximum hygiene across all productive process. . 100% european production, according to the highest quality standards. . Non-woven fabric Polypropylene in 3 protective layers; . Nose adjustment and ear support elastic bands; . Pleats for adaptation to the user’s face; . Biocompatible and latex-free; . High bacterial and particle filtration (BFE) ≥ 98% . Highly breathable; . Splash resistance (Type IIR); . Fabricated in clean room (ISO 14644 – 1:2015); . CE marked . EN 14683:2009 + AC2019/ 93/42/ECC MDD / EN 12127
Request for a quoteDR. JOHANNES HEIDENHAIN GMBH
Germany
The angle encoders without integral bearing (modular angle encoders) ERP, ERO and ERA consist of two components—a scanning head and a graduation carrier, which must be aligned with each other during mounting. The eccentricity of the shaft as well as installation and adjustment therefore have a decisive effect on the achievable accuracy. Modular angle encoders are available with various graduation carriers. The vacuum-compatible encoders are distinguished by the following features: • Air vents • Production in a clean room • Specialized cleaning and packaging • Cable with PTFE insulation and tin-plated copper braiding
Request for a quoteACCUTOOL LTD.
Ireland
Clean Room products Accutool is an agent to several manufacturers and we offer a wide range of standard stainless steel products for the clean room environment. Ultrasonic cleaning equipment and fluids Metal and ceramic medical implants, surgical instruments, endoscopes and accessories can be cleaned with ELMA Ultrasonic technology. Cleaning equipment - Multi-frequency modular cleaning systems - Elmasonic Ultrasonic cleaning units - Elmasonic Industrial Product range - Ultrasonic cleaning systems for the medical technology Cleaning fluids for splash wash and for ultrasonic washing machines - ELMA clean 110 - ELMA clean 270 - ELMA clean 300 ** Ask for a quote **
Request for a quoteAV COMPOSITES
France
With NOVACLEAN ® brand, always in the context of innovation, AV Composites offers a new range of technical insulating aluminium sandwich panels as well as processes to build clean rooms: - Medical / Pharmaceutical - Microelectronics - Food Manufacturing Processes - Petrochemical - Precise Industry A new generation of doors and windows, dual-flush or semi-flush, complete the range NOVACLEAN ®.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
PROAIR GMBH
Germany
Clean the air directly when vacuuming! With the DELPHIN you can solve all typical vacuum cleaner problems. Every vacuum cleaner has to live with the compromise between suction power and retention capacity and the filters clog with sucked-in dust, which gradually reduces the suction power. With the DELPHIN, the polluted air is led into the water right at the beginning, whereby dust and pollutants are bound directly in the water. The click lamella creates an intense water vortex and is also a further cleaning stage. This system works so efficiently that it even binds fine dust and coronaviruses safely in the water. The water is simply thrown away after use. Due to the special construction of the DELPHIN DP S8, absolutely without filters, foams or sound insulation mats, the self-drying function can ensure a long service life. You can place the DELPHIN in the room as an air purification device. Or you can use the DELPHIN to clean floors and furniture.
Request for a quoteResults for
Clean room cleaning - Import exportNumber of results
19 ProductsCountries
Company type
Category