Clamping plates - Import export

Accessory Profile KP09P: Pneumatic clamping plate for shaft clamping Selectable sizes of the compressed-air connection Easy mounting and retrofitting

Accessory for position indicator DA09S Profile KPL09: Contour matching with DA09S position indicator for shaft diameter 12 … 20 mm Robust zinc die-cast design Easy mounting and retrofitting

Accessory Profile KP09: KP09 for shaft diameters 8–20 mm Selectable sizes of the compressed-air connection Easy mounting and retrofitting

Profile KPE04: Contour matching with DE04, AP04 position indicators for shaft diameters 10 … 20 mm Lateral position of the clamping lever Easy mounting and retrofitting

Accessory for position indicator DA04 Profile KPL04: Contour matching with DA04 position indicator for shaft diameters 8 … 14 mm Robust zinc die-cast design Easy mounting and retrofitting

Accessory Profile KP04: KP04 for shaft diameters 8–15 mm Selectable clamp lever position Easy mounting and retrofitting

The easy operability and rapid adjustment using a scale means that the clamping jaws can be quickly and surely adapted to new workpieces The workpiece is always centred through the systematic construction of the 5-axis compact clamping system. The optimal accessibility to the workpiece allows short, standard tooling to be used. Tooling costs are significantly reduced. Positive down force by a clamping depth of >5 mm. Clamping widths of 20 mm to 320 mm are possible. Assembly: The 5-axis clamping system compact can be mounted on T-slot tables, grid systems or, using an adapter flange on conventional zero-point clamping systems. Accessory: Seating ledge 41345 Jaw plates 41320 Pendulum jaws 41325 Centre jaws 41335 Coupling for cross-clamping 41365 Order the seating ledges and jaw plates with pins separately.

KEIPER timing belt clamping plates can be made of many different materials, e.g. aluminum, steel or stainless steel. Keiper can produce them in all pitches and designed according to your specifications and drawings. This means that you will receive the optimal solution for the intended application and load. Our timing belt clamping plates work together optimally with our extensive and complete range of timing belts: in other words, a perfectly matched system for your requirements. We also have a large number of standard aluminum clamping plates on stock, which can be reworked according to your specifications (e.g. bores and mechanical processing based on drawings). Furthermore, such special surface coatings as hard coating, anodizing, zinc coating or bronzing improve the corrosion and wear resistance.

Standard: 4000 x 2000 x 300 mm Quality: GG 25 / Haerte (Brinell): 200HB Customer request: Customer drawing

zinc diecasting*rod Ø 10 mm* vinyl coated jaws

zinc diecasting*rod Ø 10 mm* vinyl coated jaws

Flange plate, piston and body rust-resistant, bright. Screws electro zinc-plated. Collet red or clear anodised. Note: Machinable collet system with base plate for mounting on 50mm pitch grid plates. The flange plate can be used for external or internal clamping collets. The contour of the workpiece to be clamped is machined into the collet. Free-form and asymmetrical contours can be clamped. The integrated spring package generates a clamping force of 5.8 kN. The clamping force can be raised to 43.5 kN by pneumatic post-clamping. The clamp is released by blowing compressed air onto the lower piston surface pushing the piston upwards and releasing the clamping force on the collet. Clamping travel 0.2 mm. Repeat accuracy < 0.01 mm. Accessory: Collet for external or internal clamping 03179

NSPV single pipe clamp Single Hole Saddle Clamp Conduit Pipe Clip Metal F Type Clamp Simple Binding Pipe Clamp

Interchangeable subplates are particularly suitable for quickly exchanging fixtures on zero point clamping plates. Ground on both sides, standard clamping pin gauge of 200 mm. Complete with clamping pins and handles. On request: Further gauges and special sizes.

Most-used size in slim design. Hollow shaft, max. Ø 20 mm. Counter with 5 decades and fine reading. Display can be designed for “mm” or “inch”. Magnifying function for good readability. Stainless-steel driving shaft as an option. Axial seal, dustproof and splash-proof. Clamping plate (see accessories).

Basic device with 4 decades Profile DA04: Hollow shaft, max. Ø 14 mm Counter with 4 decades and fine reading Detent as an option Magnifying function for good readability Stainless-steel driving shaft as an option Axial seal, dustproof and splash-proof Clamping plate (see accessories)

Hollow shaft, max. Ø 14 mm. Counter with 4 decades and fine reading. Detent as an option. Magnifying function for good readability. Stainless-steel driving shaft as an option. Axial seal, dustproof and splash-proof. Clamping plate (see accessories).

Kullen-Koti roller brushes 302 are indeed unique and easy-to-handle: you only purchase the roller brush core once and easily refill it yourself with the corresponding strip brushes after wear. And besides, it is a very economical brush system. The ruged construction allows problem-free operation also in adverse conditions. Roller brushes type 302 consit of a tubular steel or stainless steel core and exchangeable strip brushes which are mounted in axial direction around the circumference. The brush core can be supplied either with journals or with arbor hole for mounting on the existing primary shaft. With the roller brush type 302 (mS) the strip brushes are fixed in side flanges. With type 302 (oS) the strip brushes are fixed directly on the tubular core with clamping plates. Fill configuration to choose: bent in axial direction, left-hand or right-hand pitch or in chevron pattern i. e. left hand and right-hand pitch starting at the centre. Strip brushes needed around the...

Our steel construction is certified according to the current standards DIN EN 1090-2 and DIN EN 3834-2. We manufacture welded parts, welded constructions and welded assemblies up to execution class 3 (EXC3). Steel construction components such as: - Assembly devices for aircraft or automobile construction - Machine frames for compressor construction - Welded frames such as track systems and transfer tables - High-precision vacuum clamping plates for high-pressure presses - Complete rudder systems We produce both: individual components and small series. Do you have any questions about our techniques, capacities or prices? Contact us, we will be happy to give you direct information.

Potentiometric position transducer in compact design with one-sided actuating rod; long life span and high adjustement speed; Flexible mounting via clamps, bushing mounts or flange plates

Housing hardened and black oxidised. Contact faces ground. Note: This positioning and clamping system is especially suitable for installation in fixtures (plates, clamping tower blocks, etc.) in all mounting positions. The modular design allows the number of and distance between the locating cylinders to be ideally adjusted to suit the clamping task. Due to the small diameters, the spacing between the locating cylinders can also be reduced. The 3 clamping balls are mechanically released through control of the locating cylinder with the "opening" connection. The 3 clamping balls move inward and the fixture can be changed quickly. For clamping, the air is taken from the "opening" connection and the "clamping" connection then receives air on the locating cylinder. The 3 clamping balls are mechanically driven outward again and the new fixture is clamped. To achieve optimal retaining force, the locating cylinder remains connected to the air.

High performance plate type heat-exchangers consist of a number of formed, sealable heat-exchange plates according to the respective requirements. The alternating pressed plates and channel spacing cause highly turbulent flow behaviour, optimal self cleaning effect and highest possible heat transfer. Use of high-grade materials such as titanium, titanium palladium, highly alloyed steels and even a UniCarb carbon/graphite version help ensure UniGasket heat-exchangers are extremely economical compared to other heat-exchanger types. The plates are clamped to a rack between frame plate and pressure plate by means of clamping bolts.

Fasten the floating clamp to the fixture with the M12 screw. Adjust the height stop and the swivel range using the blue sleeve and lock with the 3x2.5 mm grub screws. When setting the height leave generous clearance above. For safe operation the M12 tapped hole must always be closed. For specific clamping applications the standard jaws can be altered or replaced. Form B: Fasten the floating clamp with M6 fastening holes to a fixture. Adjust the height stop and pivot range using the blue adjusting sleeve and clamp with grub screws (4x AF 2.5). When setting the height limit, allow ample play at the top. For specific clamping situations, the standard jaw plates can be modified or replaced.

Four new models for even more flexibility The product family of aluminium Solid Clamp tube connectors has a new addition: size 30 base clamps, sleeve clamps and hinge clamps are now also available for delivery with integrated ball joint. A sleeve clamp with double ball also adds to the range. The ball joints are designed for loads of up to 40 Nm (static). Connected applications can be pivoted freely by 60° and rotated freely by 360°. This way, the new tube connectors with ball joint provide a significantly higher degree of freedom for construction than conventional hinged connectors. An appropriate surface coating on the ball joint makes for a high-strength clamping connection. The clamps feature a universal connecting plate for flexible integration. Features: can be combined with size 30 tube connectors the clamps feature a universal connecting plate (KGFS 30, KGM 30, KGGPZ 30) for flexible integration high-strength clamping thanks to special finishes

Potentiometric position transducer in compact design with one-sided actuating rod and return spring; long life span and high adjustement speed; Flexible mounting via clamps, bushing mount or flange plates; probe tip with pressed-in hardened metal ball

Our product range includes various types of posts for attaching double wire mesh fences. The posts for setting in concrete with cover strips are the most commonly used type of posts. Alternatively, the posts can be attached using clamping plates powder-coated in the same RAL color. The corresponding sizes for the mats 0.63 m to 2.43 m are available.

Manual positioning table drived by metric fine thread screw (pitch 1 - 1,25 mm). Actuated by grip knob. Guided by 2 rods on bronze bearings. Robust and economical table. Interchangeable with the 309B range. Options : Positioning indicator Position clamping Base plate (with or without ruler) Assembly in XY or YZ table

clamping plate material: aluminum alloy AlMg3 size: 15 x 35 x 66 mm 1 internal thread: M8 - 6H in the middle, 2 internal threads: M6 - 6H central circle diameter: 30.20 +0.10/-0.00 all 90°to be made as 0.5mm x 45° tolerance according to ISO 2768-F grade unit weight: 57.31 g manufactured by CNC machining center Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Whether lathe or machining center Complete machining made easy: You cannot only use our MANDO and MAXXOS segmented mandrels on the lathe, you can also use them in stationary mode. Simply screw the mandrel onto the ms dock [manually actuated] or hs dock [hydraulically actuated] and you can clamp your workpiece from the inside, stationary mode. Precise, without vibration and with minimum set-up effort. The extremely wear-resistant segmented clamping bushing of case-hardened chromium-nickel-steel with the rubber between the segments, especially developed by HAINBUCH, makes it possible. Manual actuating unit ms dock The hand-actuated ms dock in conjunction with stationary MANDO and MAXXOS segmented mandrels is ideal for machining centers, measuring machines, radial drill presses, parallel and angle plate clamping or for clamping on dividing heads. The version ms dock rotating can be used on turning and grinding machines until RPM 1/min.