Clamping components - Import export

Precision locking Clamping of machinery and plant components Locking units are used primarily as functional clamps for precision locking, but also for preventing unwanted movement. Series KFH, KFP, KB... Extensive standard range with numerous series for special applications, including outdoor, cylinders, machine tools DGUV and Lloyd’s approved series available Both load directions

1. Screw the locking screw into the collar bush, fixture clamp and clamping unit and screw onto the baseplate. 2. The workpiece is clamped by tightening the fixture clamp with a spanner. Advantages: Compact design Quick and easy clamping of components Pull-down effect Drawing reference: 1) Locking screw 2) Collar bush 3) Fixture clamp 4) Clamping unit

By using clamping levers with integrated clamping force intensifier, the clamping force can be increased by up to 75% compared to standard clamping levers. Furthermore, this product can also be used by persons with limited hand strength (e.g. in rehabilitation) to achieve comparable clamping forces with less effort. Less effort is also needed to loosen the clamping lever. The increase in clamping force is achieved by the integral needle roller thrust bearing, which generates very low surface friction on a rigid contact surface during clamping. The hardened thrust washers are designed for high clamping forces and the bearing with its high load rating guarantees a long service life. The clamped component is permanently protected by the large, stationary contact surface. A washer is no longer required. Due to the modular construction many special designs are available.

1. Screw the locking screw into the collar bush and fixture clamp and screw onto the baseplate. 2. The workpiece is clamped by tightening the fixture clamp with a spanner. Advantages: Compact design Quick and easy clamping of components Drawing reference: 1) Locking screw 2) Collar bush 3) Fixture clamp

Body steel. Cam levers cast aluminium. Version Body black oxidised. Tnut electro zincplated. Cam levers black powder coated. Note The clamp module is inserted into the Tslot from above and secured using the cam lever, no other tools required. Advantages The eccentric clamp modules can be used on conventional aluminium profile systems or on Tslot tables as stops, fasteners or clamps for components and workpieces.

Process Clamping for Rail Systems, Compact Holding force 300 N Small can clamp perfectly too: The LOCKED-Family PLK clamping elements are more compact than the Series PL components. They also clamp directly onto the respective linear guide, suit all standard rail sizes from 15 to 55 mm and profiles from the known suppliers and are extremely reliable and space-saving. Thanks to the patented spring steel plate system, the LOCKED-Family PLK achieves clamping and holding forces of up to 2,100 N with the shortest reaction times when vented. LOCKED PLK achieve 100 % clamping force due to the steel pads that are used, even on greased rails. The clamping elements represent the maximum holding forces. Whether in the 4 or 6 bar version, they are good for up to 1 million cycles.

Ming Xiao Manufacturing Co., Ltd.is professional ISO9001 certificated Metal Parts Parts manufacturer, Located in China Ningbo,Specialize in Services of Sheet Metal Stamping,CNC Turning & Machining,Tube Bending, Cold forging & Hot Forging, and also can provide outsourcing services of laser cutting & Casting. We produce metal parts for various indstries,custom produce a wide variety of machine parts and hardware components according customer’s drawing or sample,such as kinds of machined parts – metal shafts,steel rods, bushings, Sleeves, Flanges, tubes; Metal stamping brackets, frames, clamps, casing, housing; deep drawn components; tube bending components; cold forging parts,studs,bolts,screws,nuts,pins; steel wire forms and all kinds metal components. We provide a wide range of machining services, can satisfy the customer many types of products one-time order, for the customer to save a lot of trouble and costs for buy in different suppliers.

Designed to be accurate, repeatable, and easy to operate IEC584 color standard (green) for type K thermocouples Strong crimped plug/cable attachment CLAMP thermocouples clip to non-ferrous components Clamp Surface for measuring substrate temperature Clamp Air for measuring ambient temperature ADHESIVE PATCH thermocouple Ultrafast response, single strand and PTFE coated Minimal thermal mass – ideal for small items or plastics EXPOSED-JUNCTION thermocouples for use on test pieces that are left permanently rigged Attached to the substrate by spot welding, soldering, use of high-temp tape or screw EXPOSED-JUNCTION THERMOCOUPLE – HIGH-TEMPERATURE featuring a glass-fiber cable Attached to the substrate by high-temp tape or screw, or spot-welded into position Placed at critical points on the product, thermocouples enable temperature profiling with a DATAPAQ Oven Tracker. All DATAPAQ probes conform to the highest standards and provide the most accurate data possible.

TYP C 042/S Cutting, stamping and bending device for axial components Description The Streckfuss Device Type C 042 is designed to cut, stamp and bend the leads of axial components. By the use of interchangeable tool sets a variety of form configurations can be achieved with this device. The change can be done easy and secured in less than two minutes. The settings will be displayed on the scale of the device. The embossing for the leads are tooling- specific. This tools are produced to meet customer requirements. The components are hand fed into the tooling. The component body has to be centered between the bending anvils. After the Foot pedal is depressed, the component leads are clamped on both sides. The leads are then cut to length and depending on the form shape the required lead features are put in the leads at this time. After that, the leads are bend to the 90° configuration. The processed component is then rejected by the front of the device. Components

TYP C 042 Cutting, stamping and bending device for axial components Description The Streckfuss Device Type C 042 is designed to cut, stamp and bend the leads of axial components. By the use of interchangeable tool sets a variety of form configurations can be achieved with this device. The change can be done easy and secured in less than two minutes. The settings will be displayed on the scale of the device. The embossing for the leads are tooling- specific. This tools are produced to meet customer requirements. The components are hand fed into the tooling. The component body has to be centered between the bending anvils. After the Foot pedal is depressed, the component leads are clamped on both sides. The leads are then cut to length and depending on the form shape the required lead features are put in the leads at this time. After that, the leads are bend to the 90° configuration. The processed component is then rejected by the front of the device. Components

High accuracy and efficiency are guaranteed thanks to special automatic (or manual) collet adapters with the highest clamping repeatability. Compensation of unbalance caused by eccentricity of adapter clamping. We’ve made component marking obsolete—our machines use the latest rotating speed measuring systems. Balancing reports can be saved as a PDF, CSV or XLS and can be sent to a builtin printer or to an ERP system—summary reports can also be created on request. Safety guarding standard ISO 21940232012 (old ISO 7475 and DIN 45690)compliant. Permanent calibration and rotor specific calibration as standard. Intuitive and easy to operate software. Latest measuring and control unit ROTORTEST based on microprocessor technology. Different correction methods are supported milling, drilling, grinding, punching, welding, adding balancing weights.

A vertical spindle High accuracy and efficiency are guaranteed thanks to special automatic (or manual) collet adapters with the highest clamping repeatability Onsite drilling or welding stations for mass correction Compensation of unbalance caused by eccentricity of adapter clamping We’ve made component marking obsolete—our machines use the latest rotating speed measuring systems Software converts amount of unbalance into value of mass to remove or add Balancing reports can be saved as a PDF, CSV or XLS and can be sent to a builtin printer or to an ERP system—summary reports can also be created on request Safety guarding standard ISO 21940232012 (old ISO 7475 and DIN 45690) compliant

Clamp difficult or easily deformable workpieces In daily use you are optimally equipped with the TOPlus or SPANNTOP chucks. However, there are always components that are difficult to clamp due to the contour, or that will be deformed through radial clamping. So what is required is an axial chuck, which in addition can also be set-up very fast. Clamp axially on a neodymium magnet The answer: HAINBUCH magnet module. With the magnet module you can clamp components axially on a neodymium magnet. The HAINBUCH magnet module is set-up in only 30 seconds. Your basic clamping device is already mounted. You exchange the clamping head that is included in the scope of delivery. When clamping, the magnetic clamping device is pulled onto the flat contact area of your basic clamping device.

Clamp difficult or easily deformable workpieces In daily use you are optimally equipped with the TOPlus or SPANNTOP chucks. However, there are always components that are difficult to clamp due to the contour, or that will be deformed through radial clamping. So what is required is an axial chuck, which in addition can also be set-up very fast. Clamp axially on a neodymium magnet The answer: HAINBUCH magnet module. With the magnet module you can clamp components axially on a neodymium magnet. The HAINBUCH magnet module is set-up in only 30 seconds. Your basic clamping device is already mounted. You exchange the clamping head that is included in the scope of delivery. When clamping, the magnetic clamping device is pulled onto the flat contact area of your basic clamping device.

The Pivot magnetic welding angle has a holding angle range from 28 to 270 degrees. The Pivot magnetic welding angle is a universal handyman for smaller welding and assembly work on round and flat material. Through the quick release and a scale, the angle can be set simply and precisely. Components can be clamped on the inside or outside. Each leg can be switched on and off through a rotary switch.