Chain tensioner - Import export

Housing 1.4308 stainless steel, from size 5 1.4301. Clamping arm 1.4301 stainless steel. Buffer natural rubber. Screw stainless steel A2. Version Housing and lever arm bright. Screw ISO 4017, grade 70, bright. Note Clamping element with integrated highly elastic, shaperetaining natural rubber buffer. Together with a chain tensioner set, sprocket set or a tension pulley, the clamping element makes a readytoinstall tensioning unit suitable for tensioning chain and belt drives. Suitable for both tensioning directions. The clamping elements are maintenancefree and tearoff resistant. The clamping element is fastened to the machine component through a bore. If necessary, a heavyduty dowel pin can be inserted in the positioning notch “P” for torque support.

Tensioner Vesconite® plastic. Screw and nut steel. Version Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. Note For tensioning roller chains. The chain tensioner set can be combined with all tensioning elements to form a readytoinstall chain clamp. The symmetrical design enables use on both sides. Large radii ensure very quiet running. The highquality plastic does not require any lubrication. The maximum chain speed should not exceed 1.5 m/s in continuous use.

Sprocket steel. Ball bearing chrome steel. Screw and nut steel. Version Sprocket teeth hardened to HRC 50, electro zincplated. Ball bearing with sealing discs 2ZC3. Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. Note For tensioning roller chains. The sprocket set can be combined with all tensioning elements to form a readytoinstall chain clamp. The ball bearings are sealed both sides, permanently lubricated and maintenancefree. The sprocket can be moved on the screw and thus adapted to the chain track. With the duplex and triplex version, precision spacer sleeves ensure correct chain guidance. Rigid mounting without a tensioning element is also possible. Can also be used as an idler sprocket.

Polyamide fibreglass reinforced. Version: Black. Note for ordering: The connecting elements are supplied in pairs. Note: The connecting elements are used to attach the two ends of the energy supply chain to the installation. Tension relief is integrated into the connecting element. The connecting elements are connected on the outer radius.

AL Series leaf chains are manufactured to ANSI leaf chain specification dimensions and are considered today's "lighter" duty of leaf chains. AL leaf chains were the first series of ANSI leaf chains and are still used in many lifting applications today due to the space-saving high strength lifting design and nature of this chain. What puts our leaf chain selection in another class of its own is the use of high-strength hardened pins, heat-treated plates, and shot-peened components. The chain is also pre-tensioned at the factory to reduce flex during initial installation. Typically leaf chains are stocked in 10ft boxes, 50ft reels and 100ft reels but we also provide cut to length and custom leaf chains.

iwis not only manufactures sprockets and plate wheels according to ISO 606 but also customized versions built in accordance with your specifications, drawings or samples. Sprockets Our standard range of sprockets includes sprockets according to ISO 606 from size 05B-1 to 32B-3. Sprockets with taper-lock bushes Taperlock-bushes for fixing hubs precisely and axially centered on a shaft. Plate wheels Standard plate wheels for the complete iwis product program: sizes 05B-1 to 32B-3. Drive sprockets and idler wheels For the FLEXON Flat Top Chain program. Our drive components program consists of torque limiters, Couplings, Tensioners, Chain tools and etc.

DAMBACH roller conveyors consist of a stable frame with rollers bolted in place. The rollers are driven by an easily serviced tangential chain drive with tensioning unit housed in a drive enclosure. The entire drivetrain is enclosed for safety and to prevent tampering. Flanged wheels rotate with the rollers to help transport goods carefully. The frame is height-adjustable. DAMBACH chain conveyors consist of self-supporting chain strands mounted on a rigid frame. The number of strands can be varied to suit the application. Duplex chains with straight side plates guarantee careful transport of your goods on an optimised support surface. Chains are supported on low-friction slide rails and can be individually tensioned. All chain strands are driven via a common driveshaft fully enclosed for safety. The mounting frames bolted to the main frames are height-adjustable. High throughput rates Travelling speed up to 0.5 m/s and acceleration up to 0.8 m/s² Max. 1500 kg per storage position

USE : Loading and unloading rails on wagons. (on the track or on site work) ADVANTAGES : Simple, tough and economical Easy to set according to the superelevation of the track. The manual Rail Loader PM-1 with : - 1 support stand on the top of the wagon - 1 boom arm, tilt and position adjustable with folding end sections - 1 chain block with crank handle with lifting cable and rail tongs, forged steel. - 1 end truck on boom arm - Length of boom arm = 3.50 m. - Lifting Capacity = 1 ton - Paint : yellow varnish Weights : Support stand = 77 Kg / Boom arm with chain block and truck = 115 Kg * The support stand may be attached the wagon : - either by bolt clamping - or by chain and tensioner (to be specified) The width of the wagon platform to be specified. OPTION The motorized Rail Loader PMO with : - Petrol engine 4-stroke - 4 KW - HONDA - Lifting Capacity : 500 Kg - Forward running and reverse by inversion of the machine and emergency braking - Weights : Support Stand = 77 Kg / Complete

Durable with high operational reliability. Powerful. Design features: • robust construction • automatic product feeding • Vacuum box extraction • Product-dependent carton suction • Carton erection in the chain • All-round product inserters • Main shaft drive • Frequency controlled three-phase drive • encapsulated gearbox • automatic chain tensioner • all product-carrying components made of stainless steel • Fast format adjustment • Gas pressure spring-loaded protective doors made from Makrolon • PLC control Additional devices: • Hot glue seal • Combined hot glue and plug closure • Special plug lock • Cardboard storage tapes with automatic magazine loading • Embossed printer for signing a flap • Coding (inkjet / laser), blind embossing • Code reader with or without folding box ejection device • Equalization for powdery or granulated products • Upper runner to support the insert easily deformable products • Inserts for brochures booklets, spoons etc.

Cylinder Head Gasket Seal , Valve Stem Intake Manifold Exhaust Manifold Gasket , Crankcase Oil Pan Gasket Oil Seal Valve Cover Gasket Timing Belt Timing Chain Timing Chain Guides Timing Chain Tensioner Camshaft Engine Mounting