Central tube - Import export

# Description Taihan Fiberoptics offers an innovative solution of Ribbon Cables for high fiber count networks with versatile application in aerial, duct, or buried deployments, improving the OSP productivity and cutting considerably installation cost and time. Our Ribbon Solution have played a significant role in the development and expansion of the bandwidth in most technologically advanced countries. # Features - Eco friendly (Gel free material) - Quick Identification (Color-coded Fiber) - Easy Preparation (All dry Block) - Cost Saving (Fast Splicing) # Products - Duct Ribbon CT SJNA - All Dry - Duct Ribbon CT SJSA CST - All Dry

Basic steel pump, central steel tube

Pump plastic base, central steel tube

Basic plastic pump, central steel tube

Coloured mini pump with 165 mm length, d. 22 mm, total weight 55 g, central tube in aluminium, inflation up to 7 bar/ 100 psi. With clips to fix to the bottle cage.

Coloured mini pump with 165 mm length, d. 22 mm, total weight 55 g, central tube in aluminium, inflation up to 7 bar/ 100 psi. With clips to fix to the bottle cage.

Pump plastic base, central steel tube from. 35 mm blue, beech wood handle, swivel fitting JUNIOR lives, inflation up to 5 bar / 70 psi.

Centrifugal force separator for powder recovery. Cyclone separator A cyclone is a centrifugal force separator and essentially consists of three parts: The intake cylinder, the cone and the immersion tube. In the intake cylinder, the air/particle mixture is brought into a circular path by means of tangential injection. Due to the taper of the subsequent cone, the speed of rotation increases sharply, so that the particles are pressed by centrifugal force against the outer wall and decelerated by friction, causing them to drop out of the air current and fall down. The cleaned air leaves the cone in an upward direction via the central immersion tube.

Force-of-gravity separators, which are used as pre-filters or for the separation of large quantities of dust and swarf. Cyclone separator Cyclones are force-of-gravity separators. The separation principle is based on centrifugal force, which is produced by the tangential injection of the raw air. Cyclones are used as pre-filters or for the separation of large quantities of dust and swarf. The degree of separation of a cyclone is not normally sufficient to meet the usual environmental protection requirements. The cyclone exhaust air must be post-filtered in most cases. Product description A cyclone essentially consists of three parts: the intake cylinder, the cone and the immersion tube. In the intake cylinder, the raw air is brought into a circular path by means of tangential injection. Due to the taper of the subsequent cone, the speed of rotation increases sharply, so that the particles are pressed by centrifugal force against the outer wall and decelerated by friction, causing them to drop out of the air stream and fall down. The cleaned air leaves the cone in an upward direction via the central immersion tube. Cyclones are usually welded sheet steel structures. Cellular wheel sluices or, in individual cases, double-gate sluices are used for the pressureless discharge of the material. In order to increase the cyclone effect, or the degree of separation, counter-spirals with a pipe connection can be placed on top of the immersion tube. Further options are, for example, wearing devices, explosion pressure relief devices, control flaps, level monitoring devices and manufacturing in stainless steel or galvanised sheet steel.

High pressure sodium lamp 100 Watt. Increased luminous flux compared to standardhigh pressure sodium lamps. Centrally-located, durable ceramic arc tube withintegrated strike bar and sodium-amalgam filling. For ignitors from 4 to 5 kV. Maximum lamp diameter 46 mm,maximum length 211 mm. E40 base, nickel-plated brass for corrosionresistance. Nominal luminous flux 10,000 lm. Luminous efficacy 100 lm/W. Light depreciation less than 20%after 16,000 hours of operation. Early failure rate less than 5%after 16,000 hours of operation. Average lifetime 28,000 hours of operation.

Floor Stand Central, closed, stored square tube

These fiber optic cables are robust fiber optic indoor/outdoor cables with a central loose tube and a maximum of 24 fibers.

These fiber optic cables are robust fiber optic outdoor cables with a central loose tube and a maximum of 24 fibers.

Fiber optic cables with this design consist of a central, jelly-filled loose tube and are available with a maximum of 24 fibers.

Indoor optical cable with a central tube containing up to 48 optical fibers, with a strength member made of steel wire and outer fire-retardant PE sheath. Operational temperature of the cable is from -40°С to 70°С. Minimum temperature for installation is -10°С.

Aerial optical cable with a central tube containing up to 48 optical fi bers with strength members made of two FRP rods, with outer PE sheath. Operational temperature of the cable is from -60°С to 70°С. Minimum temperature for installation is -30°С.

Aerial Figure 8 optical cable with a central tube with up to 48 optical wires with an integrated messenger made of FRP rod, steel strand or steel wire; with outer PE sheath. Operational temperature of the cable is from -60°С to 70°С. Minimum temperature for installation is -30°С.

Optical cable for backbone networks with a central tube with up to 48 optical fibers, with an armor of round steel wire and outer PE sheath. Operational temperature of the cable is from -40°С to 70°С. Arctic version: from -60°С to 70°С. Minimum temperature for installation is -30°С.

Aerial optical cable, self-supporting, dielectric, with a central tube with up to 48 optical fi bers, with a strength member made of two FRP rods, with an outer PE sheath. An additional strength member made of aramid yarns or glass yarns is added to cables with tensile force from 3 kN and more. Operational temperature of the cable is from -60°С to 70°С. Minimum temperature for installation is -30°С.

Optical dielectric cable for backbone networks with a central loose tube containing up to 48 optical fibers, with an armor of round FRP rods and outer PE sheath. Operational temperature of the cable is from -60°С to 70°С Minimum temperature for installation is -30°С.

Optical cable for backbone networks with a central strength member made of FRP rod in PE sheath; around the central strength member are stranded tubes containing up to 24 optical fibers each, filling dummy tubes (if necessary), insulated copper conductors, with laminated aluminum PE tape; in inner PE sheath, with an armor made of round steel wires and outer PE sheath. Operational temperature of the cable is from -40°С to 70°С. Arctic version -60°С to 70°С Minimum temperature for installation is -30°С.

Unitube optical cable Discover our range of optical fiber central tube consists of 4 to 24 fibers 9/125 - 50/125 - 62.5 / 125. Each fiber is sheathed at 250μm. The central tube has a diameter of 2.5mm This cable is protected by an LSZH outer sheath (flame retardant halogen sheath). It contains glass fibers against rodents.It has excellent mechanical strength. Please consult our technical sheet.