Results for
FRONTAL ALUMINIUM
Poland
manufactured according to currently applicable standards, such as: PN EN 1676; DIN 1725; PN-76/H-88027;ZN-86/MH-MN-260-14 , as well as according to the chemical composition specified by the customer, Each alloy is filtered and refined and can be modified at the customer's request.
Request for a quoteXIAN HUAN-TAI TECHNOLOGY & DEVELOPMENT CO., LTD.
China
Aluminum Die Castings ADC12 A356 for engine 1, Die Casting, Gravity Casting, Sand Casting 2, Materials: Aluminum alloy, zinc alloy, bronze. 3, Has established efficient quality system and obtained international approvals ISO9001, TUV-PED, BV. 4, Produced by experienced technical staff. 5, Production capacity: more than 8,000MT per year. 6, Small orders accepted. 7, Perfect facilities. 8, Advanced machining equipment. 9, Material standards: GB,DIN,EN,NF,ISO,JIS,SS,BS,AISI,SAE,ASTM,UNS,ACI.
Request for a quoteXIAN HUAN-TAI TECHNOLOGY & DEVELOPMENT CO., LTD.
China
Gravity Casting Aluminum for Light Housing Clutch Body 1, Die casting, gravity casting, sand castings 2, Materials: Aluminum alloy, zinc alloy, bronze etc. 3, Has established efficient quality system and obtained international approvals ISO9001, TUV-PED, BV. 4, Produced by experienced technical staff. 5, Production capacity: more than 8,000MT per year. 6, Small orders accepted. 7, Perfect facilities. 8, Advanced machining equipment. 9, Material standards: GB,DIN,EN,NF,ISO,JIS,SS,BS,AISI,SAE,ASTM,UNS,ACI.
Request for a quoteXIAN HUAN-TAI TECHNOLOGY & DEVELOPMENT CO., LTD.
China
1, Die casting, gravity casting, sand castings 2, Materials: Aluminum alloy, zinc alloy, bronze etc. 3, Has established efficient quality system and obtained international approvals ISO9001, TUV-PED, BV. 4, Produced by experienced technical staff. 5, Production capacity: more than 8,000MT per year. 6, Small orders accepted. 7, Perfect facilities. 8, Advanced machining equipment. 9, Material standards: GB,DIN,EN,NF,ISO,JIS,SS,BS,AISI,SAE,ASTM,UNS,ACI.
Request for a quoteZS INDUSTRIES CO., LTD
China
Material: A356, A360, A380, ADC12 Process: Sand casting + machining Gravity casting + machining Die casting + machining Low pressure casting + machining Application: Air compressor Pumps Concrete plant equipment
Request for a quoteMAGMETT METALL INC.
Turkey
ntroducing ALSi, a remarkable aluminum-silicon alloy designed to cater to the needs of the casting industries. Crafted with utmost precision and expertise, ALSi offers unparalleled quality and performance. Our ALSi alloy is meticulously engineered to meet the stringent requirements of casting applications. With its exceptional properties, it ensures superior strength, durability, and impeccable casting results. Not only does ALSi excel in casting industries, but it also finds its utility in powder metallurgy. Its versatile nature allows for seamless integration into various manufacturing processes, expanding its range of applications. Experience the reliability and versatility of ALSi, as it revolutionizes the casting industry with its exceptional performance and unmatched quality. Trust in ALSi to elevate your casting projects to new heights of excellence.
Request for a quoteMVA D.O.O.
Slovenia
High pressure die casting with various aluminum alloys
Request for a quoteGLOBAL GASES GROUP THAI CO LTD
Thailand
SIMPLE BUT POWERFUL: XtremepowerUS 1/3 HP 4 CFM 1-Stage Rotary Air Vacuum Pump is designed to have high efficiency and low noise output with internal high volume cooling fan for extended use HEAVY DUTY CASING: Die-cast Aluminum Alloy Casing enables the vacuum pump oe light and durable at the same time. Equipped with brass fitting tethered safety caps to prevent oil leaks during transportation and handling EASY OIL CHANGE: The vacuum pump features a simple Oil Fill Port for a clean pour and Oil Drain Plug positioned beneath the oil reservoir to quickly drain when needed. Checking the spillage meter will help to ensure the proper level of oH PACKAGE INCLUDED: Multicolored set of three 36" hoses, Manifold Gauge, Oil Bottle, Accessories, Leak Detector and Storage Bag to keep equipment clean and dust free and R134a Can Tap
Request for a quoteGLOBAL GASES GROUP THAI CO LTD
Thailand
SIMPLE BUT POWERFUL -XtremepowerUS 1/4 HP 3 CFM 1-Stage Rotary Air Vacuum Pump is designed to have high efficiency and low noise output with internal high volume cooling fan for extended use (Include R-134A automotive air conditioning dispensing valve design with hand operated punch/valve control, connects all R-134a refrigerant cans with 1/4" Male threads)HEAVY DUTY VACUUM PUMP - Die-cast Aluminum Alloy Casing enaDles the vacuum pump oe light and durable at the same time. Equipped with Brass fitting tethered safety caps to prevent oil leaks during transportation and handling.HVAC GAUGE READING - The XtremepowerUS HVAC service gauge set is great for diagnosing and repairing AC systems. Ideal use for R12, R22, R134a and R410aEASY OIL CHANGE - The vacuum pump features a simple Oil Fill Port for a clean pour and Oil Drain Plug positioned Deneath the oil reservoir to quickly drain when reeded. Checking the spillage meter will help to ensure the proper level of oil.
Request for a quoteMING XIAO MANUFACTURING CO., LTD
China
Custom Quality Anodized Aluminum Tubes Ming Xiao Manufacturing Co., Ltd engaged in precision turning parts manufacuring more than 20years, we have a lot of different machines for different turned parts & machined parts. we custom quality anodized aluminum parts according to customers drawing or samples. As a professional machined parts supplier from China,we can produce aluminum machined parts from aluminum bar,aluminum extruded profiles,aluminum tubes,rough parts of die castings, All commonly used aluminum alloy can be processed, if you want the aluminum alloy Number is not routinely supplied, as long as the quantity is enough, we can provide customized services. We are specialize in custom Anodized Aluminum tube, we do further CNC turning on anodized products to make texture of decorative design,If you have any aluminum machined Parts need done anodizing,Welcome contact us to discuss about your projects.
Request for a quoteMING XIAO MANUFACTURING CO., LTD
China
Ming Xiao Mfg is a professional machined parts supplier from China,we can produce aluminum machined parts from aluminum bar,aluminum extruded profiles,aluminum tubes,rough parts of die castings, All commonly used aluminum alloy can be processed, if you want the aluminum alloy Number is not routinely supplied, as long as the quantity is enough, we can provide customized services. Aluminum Turned Parts Item: Aluminum turned parts, Aluminum connecting rod Materials: Standard Aluminums,such as AL2024,AL5052,AL6061,AL6063,AL6082,AL7075… Finish:Anodizing,chemical cleaning Technics: Aluminum Forging,CNC Lathe turning,Milling,Knurling,threading China Metal Parts manufacturer custom produce Aluminum turned parts according to customer’s drawing or samples. If you are interest in our CNC Lathe turning services produce your aluminum parts, please don’t hesitate to contact us. sales@mxmparts.com WhatsApp +86 13780014913
Request for a quoteMING XIAO MANUFACTURING CO., LTD
China
Ming Xiao Mfg is a professional machined parts supplier from China,we can produce aluminum machined parts from aluminum bar,aluminum extruded profiles,aluminum tubes,rough parts of die castings, All commonly used aluminum alloy can be processed, if you want the aluminum alloy Number is not routinely supplied, as long as the quantity is enough, we can provide customized services. Aluminum Turned Parts Item: Aluminum turned parts, Aluminum connecting rod Materials: Standard Aluminums,such as AL2024,AL5052,AL6061,AL6063,AL6082,AL7075… Finish:Anodizing,chemical cleaning Technics: Aluminum Forging,CNC Lathe turning,Milling,Knurling,threading China Metal Parts manufacturer custom produce Aluminum turned parts according to customer’s drawing or samples. If you are interest in our CNC Lathe turning services produce your aluminum parts, please don’t hesitate to contact us.
Request for a quotePLANSEE SE
Austria
During the aluminum casting process, the metal melt is either poured or pressed into the mold. This process is used, for example, to manufacture cylinder heads, wheel rims and many other aluminum castings. Here, the mold has to repeatedly withstand the metal melt at a temperature of over 600 °C: for inserts made of our tungsten-heavy metal alloy Densimet® and the molybdenum alloy TZM, that's not a problem. The benefits to you: — Shorter cycle times — Top surface quality for your products — Long mold service life — No cracks in the mold insert Tailor-made mold inserts, sprue bushes, cooling inserts and other individual parts as well as semi-finished products for your mold are available.
Request for a quoteINOXYDA SA
France
We cast Aluminium Bronze (NAB Alloys) up to 15 To and can support most valve projects in aluminium bronze to be delivered "as cast" , rough or fully machined according to international quality standards
Request for a quoteXUFENG TOOL TECH GROUP LIMITED
China
Rapid tooling Service We offer rapid tooling service, when parts demand quantity is hundreds to thousands,you will need to consdie this service and when your demand items are similar structure, types are many and demand quanity is not big then quick Turn Tooling. Rapid tooling for plastics and Die Casting of metal (Aluminum alloy or Zinc Alloy). Also we has stable surface treatment partner with different finishing like sand blasting, texture, painting, powder coating and so on, depending on our customers' requirements. We can make tool life to be 5k to 100ks or more. So if you have such project coming, you are welcomed to inquiry us freely . What Is Rapid tooling Rapid tooling is starting to be used to create molds for commercial operations,to simplify the mould structure for low cost & short lead-time. Rapid tooling provides a way to quickly provide molds to moulding the required products for low volume production demand. apid tooling material usually are Al7075 and...
Request for a quoteXUFENG TOOL TECH GROUP LIMITED
China
Rapid tooling for plastics and Die Casting of metal (Aluminum alloy or Zinc Alloy). Also we has stable surface treatment partner with different finishing like sand blasting, texture, painting, powder coating and so on, depending on our customers' requirements. We can make tool life to be 5k to 100ks or more. So if you have such project coming, you are welcomed to inquiry us freely . We manufacture our rapid toolings in material aluminium, P20, NAK80 and S136 tool steel, which can be run in a standard injection moulding machine to produce production quality parts in low-volumes. P20 prototype tooling for volumes up to 50,000+ shots. NAK80 or S136 prototype tooling for volumes up to 100,000+ shots. Prototype tooling in 5 to 28 calendar days. Tooling Lead-Time get short leadtime, Low Cost - reduced Cost from material ,MFG , Allowing real trials ,Allows functional test of parts on initial design stage, Many design faults are debugged before mass big production.
Request for a quoteTURKOGLU
Turkey
Overground Fire Hydrant / Body, Lower and Upper Pipe: GG-25 Cast Iron / Coupling: Aluminium Alloy / Handwheel : GG-25 Cast Iron / Disc : GGG-40.3 Ductile Iron / Check Valve: Brass / Upper shaft : Stainless Steel / Shaft motion pipe: Galvanized steel or Stainless Steel ** Application area: Fire installations
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
INTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for through and blind holes, with straight flutes Application: For cast materials Material of product: HSSE Surface treatment: TiCN For materials: Grey cast iron, Aluminium casting alloy, Copper base alloys etc* Tensile strength up to: 1000 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry, base material and surface treatment for short-chipping casting material. The TiCN surface treatment (titanium carbon nitride - grey violet) increases the surface hardness (approx. 3000 HV) and the sliding properties (coefficient of friction: 0,3). It provides a better cutting performance and increased tool life time. Tap for machine use in blind and through holes. The short lead-in chamfer makes that tap universal in application. The flutes can hold the most part of the chips. Materials: Grey cast iron < 1000 N/mm² Aluminium casting alloy Si > 5% (short-chipping) up to 600 N/mm²
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: For high-tensile materials Material of product: HSSE Surface treatment: TIN For materials: High-tensile materials, Alloyed heat-treatable steel, Cast iron , Aluminium cast and wrought alloys, Copper and alloys, etc* Tensile strength up to: 1300 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry, base material and surface treatment for high-strength material. The TIN surface treatment (titanium-nitride gold-yellow) increases the surface hardness (approx. 2300 HV) and the sliding properties. It provides a better cutting performance and increased tool life time. Tap for machine use in blind holes. The fast spiral flutes provide good chip removal from the blind hole. Materials: High strength material up to max. 1300 N/mm² Alloyed heat-treatable steel, cast iron with nodular graphite, malleable cast iron Aluminium cast and wrought alloys Si<5% (long-chipping)
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: For high-tensile materials and stainless steel Material of product: HSSE PM Surface treatment: TiAlN For materials: High-tensile materials, Stainless steel, Alloyed heat-treatable steel, Cast iron, Aluminium cast and wrought alloys, etc* Tensile strength up to: 1200 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry, base material and surface treatment for Stainless steel. The TiAlN surface treatment increases the surface hardness (approx. 3300 HV), the sliding properties (friction coefficient: 0,25) and with high temperature resistance up to 800°C. It provides a better cutting performance and increased tool life time. The base material is powder metal (HSSE PM) with a higher hardness and toughness. Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: For high-tensile materials Material of product: HSSE Surface treatment: TIN For materials: High-tensile materials, Alloyed heat-treatable steel, Cast iron , Aluminium cast and wrought alloys, Copper and alloys, etc* Tensile strength up to: 1300 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry, base material and surface treatment for high-strength material. The TIN surface treatment (titanium-nitride gold-yellow) increases the surface hardness (approx. 2300 HV) and the sliding properties. It provides a better cutting performance and increased tool life time. Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Materials: High strength material up to max. 1300 N/mm² Alloyed heat-treatable steel, cast iron with nodular graphite, malleable cast iron Aluminium cast and wrought alloys Si<5% (long-chipping)
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: For aluminium Material of product: HSSE Surface treatment: TiAlN For materials: Pure Aluminium, Aluminium cast and wrought alloys, Soft iron etc* Tensile strength up to: 700 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry, base material and surface treatment for light alloys (Aluminium, Copper, etc). The TiAlN surface treatment increases the surface hardness (approx. 3300 HV), the sliding properties (friction coefficient: 0,25) and with high temperature resistance up to 800°C. It provides a better cutting performance and increased tool life time. Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Materials: Soft Iron Pure Aluminium, Aluminium cast and wrought alloys Si<5% (long-chipping) Pure Copper, Copper alloys and copper-zinc alloys (long-chipping)
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric Fine, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: For high-tensile materials Material of product: HSSE Surface treatment: TIN For materials: High-tensile materials, Alloyed heat-treatable steel, Cast iron , Aluminium cast and wrought alloys, Copper and alloys, etc* Tensile strength up to: 1300 N/mm2 Standard: DIN 374 Tolerance: ISO2/6H Special geometry, base material and surface treatment for high-strength material. The TIN surface treatment (titanium-nitride gold-yellow) increases the surface hardness (approx. 2300 HV) and the sliding properties. It provides a better cutting performance and increased tool life time. Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Materials: High strength material up to max. 1300 N/mm² Alloyed heat-treatable steel, cast iron with nodular graphite,
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: For high-tensile materials and stainless steel Material of product: HSSE PM Surface treatment: TiAlN For materials: High-tensile materials, Stainless steel, Alloyed heat-treatable steel, Cast iron, Aluminium cast and wrought alloys, etc* Tensile strength up to: 1400 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry, base material and surface treatment for Stainless steel. The TiAlN surface treatment increases the surface hardness (approx. 3300 HV), the sliding properties (friction coefficient: 0,25) and with high temperature resistance up to 800°C. It provides a better cutting performance and increased tool life time. The base material is powder metal (HSSE PM) with a higher hardness and toughness. The conical reduced leading thread improves chip drain and reduces thread friction. Tap for machine use in blind holes.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: General use (universal tap) Material of product: HSSE Surface treatment: TiAlN For materials: Steel and steel alloys, Stainless steel, Cast iron, Titanium and alloys, Nickel and alloys, Copper and alloys, Aluminium, Aluminium cast and Wrought alloys, etc* Tensile strength up to: 1200 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H UNiTap - Universal High-End Threading Tap. A real revolution in production of internal threads: for nearly all materials for nearly all production cases excellent thread quality high life-time unique patented cutting geometry ideal tap for all workshops and manufacturing with changing applications huge costs savings - only one threading tool for all applications The TiAlN surface treatment increases the surface hardness (approx. 3300 HV), the sliding properties (friction coefficient: 0,25) and with high temperature resistance up to 800°C.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: General use (universal tap) Material of product: HSSE Surface treatment: TiAlN For materials: Steel and steel alloys, Stainless steel, Cast iron, Titanium and alloys, Nickel and alloys, Copper and alloys, Aluminium, Aluminium cast and Wrought alloys, etc* Tensile strength up to: 1200 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H UNiTap - Universal High-End Threading Tap. A real revolution in production of internal threads: for nearly all materials for nearly all production cases excellent thread quality high life-time unique patented cutting geometry ideal tap for all workshops and manufacturing with changing applications huge costs savings - only one threading tool for all applications The TiAlN surface treatment increases the surface hardness (approx. 3300 HV), the sliding properties (friction coefficient: 0,25) and with high temperature resistance up to 800°C.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
High quality self-tapping ensat thread inserts. Made of ASIS 304 stainless steel Long version with three cutting holes, Ensat 308 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Similar to Ensat 307 but longer, so can be applied in thicker materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.). These self-threading bushes have an internal thread for the screw and an external thread with cutting slots to insert itself into the material
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
High quality zinc plated steel self-tapping ensat thread inserts. Made of galvanized steel, conforming to RoHS, this ensures excellent wear and corrosion resistance Long version with three cutting holes, Ensat 308 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Similar to Ensat 307 but longer, so can be applied in thicker materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.).
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
High quality self-tapping ensat thread inserts. Made of ASIS 304 stainless steel Short version with three cutting holes, Ensat 307 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Also Ensat 307 inserts are shorter than Ensat 308 and therefore ideal on thinner materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.).
Request for a quoteResults for
Cast aluminum alloy - Import exportNumber of results
65 ProductsCountries
Company type
Category