Capillary tubes - Import export

Vacusera Mini Capillary Blood Collection Tubes are designed with safety cap for collecting high quality capillary blood sample.

The 2M connector was developed for thin pipes such as capillary tubes with an outside diameter from 0.7 to 6.35 mm. It consists of a sealing cone which is pushed into the matching inner cone of the connector and acts as a bushing for the pipe while performing a sealing function. An additional O-ring, which is protected from damage by a pressure disc, holds the pipe in place and prevents it from being pulled out accidentally.

Biomaterial PEEK capillaries are small, thin tubes made of polyether ether ketone (PEEK) material that are specifically designed for use in biomedical applications. They are biocompatible, meaning they do not cause any adverse reactions when implanted in the body, and are commonly used in medical devices such as catheters and implants. PEEK capillaries are known for their high strength, durability, and resistance to chemicals and heat, making them an ideal choice for biomedical applications where reliability and performance are critical. Key Features of PEEK Capillary: • Ultra hard material • Very good chemical resistance • Stable at temperatures up to 228°C • Excellent abrasion resistance • Flame retardant (UL94 V-0) • Very tight dimensional tolerances

Nitinol (Nickel and titanium alloy) introduction: Nickel titanium alloy is a kind of shape memory alloys, shape memory alloy is able to own plastic deformation at a certain temperature automatically restore to the original shape of special alloy its expansion rate is above 20%, the fatigue life of 1 * ten to the seventh, 10 times higher than ordinary spring damping properties, its corrosion resistance is superior to the current medical * * stainless steel, so it can satisfy the application requirement of all kinds of engineering and medicine, is a very * * of the functional materials in addition to memory alloy has a unique shape memory function, but also has high wear resistance corrosion and other excellent characteristics of damping and super elasticity. Nickel Titanium (also known as Nitinol or NiTi) is in the unique class of shape memory alloys. A thermoelastic martensitic phase transformation in the material is responsible for its extraordinary properties.

We can do secondary processing on the tubing. Tubing ends: flanging, expanding, sealing the head, welding, ect. Tubing printing: scale and ring printing. Punch holes: rould hole, elliptical hole, through hole, single side hole, square hole, shaped hole. Tubing shaping: bending, different angles and shapes forming.

Heated, for plates and menu plates. Design: Casing and base made of chrome nickel steel, chromium steel plattform. Ther mos tat and on-off switch loosely attached, with built-in casing for mounting into site facing. Thermostatically adjustable from 30 – 90 °C. Capillary tube length 1800 mm. Capacity: approx. 50 plates. E.-Connection: 230 V-0,4 kW. Thermostat-built-in casing 107 x 175 x 80 mm, cut-out measures for built-in casing 87 x 150 mm.

The DCX-22AA-CTD data loggers measure conductivity and temperature as well as pressure, along with the depth of bodies of water. They compensate for the air pressure using an additional, water-tight absolute pressure sensor with a stainless steel separating diaphragm. Unlike gauge pressure systems with a capillary tube, this system is completely resistant to moisture and can therefore be immersed. Thanks to their long-life battery, they can keep recording measurement results for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.

The DCX-22AA data loggers compensate for changes in air pressure by means of a separate, water-tight absolute pressure sensor with a stainless steel separating diaphragm. Unlike gauge pressure systems with a capillary tube, this system is completely resistant to moisture and can therefore be immersed. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.

Twisted glass tubes and capillaries are produced simply by heating and twisting. By this means, the tubes obtain a large internal surface in relation to their length, enabling them to be used e.g. as cooling sections. Another application area is for ornamental and design articles.

If required, we can supply capillaries and tubes with predetermined break points. For this purpose, the component is notched at the required breaking location. If the component is then subjected to a bending force, it will break at the notched point. To prevent unintended breakage, we recommend using medium or thick-walled tubes and capillaries.

The distinctiveness of these capillaries is their very thin wall-thickness in relation to their diameter. The extremely thin walls lead to the special feature of these capillaries to be deformed easily. Additional features linked to the thin wall-thickness are minimal optical distortion as well as very low absorption for a wide range of radiation. This feature is used e.g. for the construction of optical measuring cells. Materials Soda-lime glass (AR, I860, PH360 etc.) Gamma sterilized soda-lime glass Borosilicate glass (DURAN©, PYREX©, SIMAX© etc.) Neutral glass (FIOLAX© and DUROBAX©) Aluminum silicate glass (Schott 8252/8253) Quartz glass (naturally melted quartz glass and synthetically produced quartz glass, incl. F300) Lead glass (lead content up to 28%) Sealing glasses for various metals such as: kovar, molybdenum, steel, silver, platinum, palladium Process of Production Like most of our capillaries the ultrathin capillaries are manufactured using the redrawing method....

A sensor only is not a responsible for good measurement. Often it depends on the surrounding conditions. Thick-walled glass-capillary-sections serve for the sensor as solid basis. Fitted on top, the sensor is mostly islolated from thermal and other environmental impacts. Solid connections between glass and metal For the production of glass-feed-throughs or glass metal sealings, precise cuttings of capillary-tubes are needed. These special tubes are glasses, which are adjusted to the physical parameters of the metals. We draw and cut such capillaries precisely to final size. Thereby the glasses can be fused on the customers wires and pins, which are made of metal. Scatter discs for the endoscopy Glass rings in different sizes with two satin cut sides, allow to manufacture small ring lightings for example for the endoscopy. By means of the rough surfaces of the glass rings, the light, coupled on the back, is refracted and diffusely spread. Different diameters and thicknesses as...

To cut capillary tubes, special blades are required, which are made of a material that is harder than glass. Normally, blades with an extremely hard diamond edge are used. However, zirconium oxide blades are a less expensive and convenient alternative. They are also very hard, and can be sharpened easily at any time by simple regrinding. These blades are excellently suited for cutting glass capillaries, as the flat blade can be drawn accurately across the glass surface. Moreover, the capillaries can be parted cleanly at the incision point. This method can even be used on extremely fine test tubes with wall thicknesses of only 0,01 mm. For convenient and secure use in one hand, the blades can be clamped into our aluminium blade holders. Therefore, we recommend requesting the blade holder as well. Glass cutting-tools

The major difference between our standard capillaries and conical capillaries lies in the different opening diameters on both ends. Whereas standard capillaries are manufactured with the redrawing-method conical capillaries are produced in a discontinuous process. Materials Soda-lime glass (AR, I860, PH360 etc.) gamma sterilized soda-lime glass Borosilicate glass (DURAN©, PYREX©, SIMAX© etc.) Neutral glass (FIOLAX© and DUROBAX©) Aluminum silicate glass (Schott 8252/8253) Lead glass (lead content up to 28%) Sealing glasses for various metals such as: kovar, molybdenum, steel, silver, platinum, palladium Process of Production During the production process of the conical capillaries a straight tube or capillary is heated and drawn. By drawing the capillary a pointy conical, tapered form, a so-called double-tip, is formed. The tip can be parted in the capillary’s smallest diameter and results in a larger diameter on one side which is determined by the blank used in the process, as...

Application Advantages Dual Extender Set: Adapter for optional use with plastic extension tube or pipe with stable metal tip 360° action radius even in confined components No loss of liquid gas in any position – even when can is full. (So-called upside down versions require2/3 empty space in the can) Use of pipe increases the action radius to 70 cm; that of the capillary tube to 25 cm

AIR DUSTER for contact-free and non-retaining removal of dust. Dust can scratch sensitive parts when removed mechanically. Therefore a contact-free and non-retaining removal of surface contamination is very important in many circumstances. Low weight and high capacity are very important for service- or repair work – a mobile compressor in your tool-box. The AIR DUSTER contains multiply purified gas. Every can is equipped with a standard aerosol trigger, including a flexible 15 cm capillary tube. Very pressure-stable because of the special GREEN-CLEAN Aerosoltechnology. Advantages and properties of GREEN CLEAN Aerosol-Technology: Very high pressure Constant stable pressur chemically inert aero-mechanic

This new air duster has numerous advantages. The propellant 1234 ze used is non-flammable and environmentally friendly. environmentally friendly with a GWP of only 6, the new propellant is well below the 150 limit of the European F-Gas Regulation. AIR DUSTER for contact-free and non-retaining removal of dust. Dust can scratch sensitive parts when removed mechanically. Therefore a contact-free and non-retaining removal of surface contamination is very important in many circumstances. Low weight and high capacity are very important for service- or repair work – a mobile compressor in your tool-box. The AIR DUSTER contains multiply purified gas. Every can is equipped with a standard aerosol trigger, including a flexible 15 cm capillary tube. Very pressure-stable because of the special GREEN-CLEAN Aerosoltechnology. Advantages and Properties of the GREEN CLEAN Aerosol Technology: ery high pressure non-inflammable Constant stable pressure chemically inert aero-mechanic