Capacitance resistance - Import export

Thanks to its linear characteristics and its wide range of potential uses, the IST AG P14-W humidity sensor is the ideal solution for universal humidity measuring tasks in a wide variety of different applications. The sensor is capable of measuring 0 % RH to 100 % RH (maximal dew point +85 °C) with a capacitance of 150 pF ±50 pF (wired) / 180 pF ±50 pF (SMD) (at 30 % RH and +23 °C) and operates within a temperature range of -50 °C to +150 °C. Further advantages of the P14-W capacitive RH sensor include: — High chemical resistance — Very low drift — Wide temperature range — High humidity stability — Resistance to condensation — Fast recovery time — Customer-specific sensor available upon request

The IST AG P14 2FW Thermo was designed especially for dew point applications and humidity generators. The favorable one-chip solution consists of a capacitive humidity sensor, based on the standard P14 sensor, together with a heating element, which, at the same time, works as a valid Pt100 sensor. The sensor achieves outstanding measurement accuracy due to the optimal thermal coupling which enables a fast recovery time. Due to heating from the Pt100, humidity is quickly released and enables fast re-measurements after condensation. Furthermore, the Pt100 sensor heats out gases or vapors from the polymer, which might cause a drift of the humidity signal. The P14 2FW Thermo humidity sensor is capable of measuring 0 % RH to 100 % RH (maximal dew point +85 °C) with a capacitance of 150 pF ±50 pF (at 30 % RH and +23 °C) and operates within a temperature range of -50 °C to +150 °C.

Stable and robust humidity sensors with ultra-fast response time are often required in applications involving meteorology – not only in normal conditions, but also under elevated environmental constraints such as extremely low temperatures, high radiation levels and under extreme condensation. Such applications need fully tailored solutions, such as those provided by the Innovative Sensor Technology IST AG P14 Rapid. The P14 Rapid humidity sensor combines speed and full range operation in an ideal way. The sensor is capable of measuring 0 % RH to 100 % RH (maximal dew point +85 °C) with a capacitance of 140 pF ±40 pF (wired) / 180 pF ±50 pF (SMD) (at 30 % RH and +23 °C) and operates within a temperature range of -80 °C to +150 °C.

With its small dimension and high sensitivity, the IST AG K5-W capacitive RH humidity sensor was developed for applications where an accurate measurement in low humidity ranges is required. The sensor is characterized by the outstanding stability in low humidity, very low drift and a high chemical resistance. With its excellent sensor characteristics, the K5-W is the optimal choice for low humidity environments. The humidity sensor is capable of measuring 0 % RH to 100 % RH (maximal dew point +85 °C) with a capacitance of 200 pF ±50 pF (at 30 % RH and +23 °C) and operates within a temperature range of -40 °C to +150 °C. Further advantages of the K5-W capacitive RH sensors include: — Fast recovery time — Very stable at low humidity — Condensation resistant — High chemical resistance — Very low drift — Wide temperature range — Customer-specific sensor available upon request

The IST AG MK33-W capacitive RH humidity sensor has been developed especially for high-end measuring applications and extreme environments making it optimal for oil applications. The MK33 excels through its extremely high humidity and temperature working range and its outstanding chemical resistance. The humidity sensor is capable of measuring 0 % RH to 100 % RH (maximal dew point +95 °C) with a capacitance of 300 pF ±40 pF (at 30 % RH and +23 °C) and operates within a temperature range of -40 °C to +190 °C. Further advantages of the MK33-W capacitive RH sensor include: — High chemical resistance — Very low drift — Wide temperature range — High humidity stability — Condensation resistant — Suitable for extreme environments — Fast recovery time — Customer-specific sensor available upon request The IST AG MK33-W humidity sensor is available with CuP-SIL-wire post-plated with Sn or Au/Cu-wire as standard configuration.

Stable and robust humidity sensors with ultra-fast response time are often required in applications involving meteorology – not only in normal conditions, but also under elevated environmental constraints such as extremely low temperatures, high radiation levels and under extreme condensation. Such applications need fully tailored solutions, such as those provided by the Innovative Sensor Technology IST AG P14 Rapid. The P14 Rapid humidity sensor combines speed and full range operation in an ideal way. The sensor is capable of measuring 0 % RH to 100 % RH (maximal dew point +85 °C) with a capacitance of 140 pF ±40 pF (wired) / 180 pF ±50 pF (SMD) (at 30 % RH and +23 °C) and operates within a temperature range of -80 °C to +150 °C.

The IST AG MK33-W capacitive RH humidity sensor has been developed especially for high-end measuring applications and extreme environments making it optimal for oil applications. The MK33 excels through its extremely high humidity and temperature working range and its outstanding chemical resistance. The humidity sensor is capable of measuring 0 % RH to 100 % RH (maximal dew point +95 °C) with a capacitance of 300 pF ±40 pF (at 30 % RH and +23 °C) and operates within a temperature range of -40 °C to +190 °C. Further advantages of the MK33-W capacitive RH sensor include: — High chemical resistance — Very low drift — Wide temperature range — High humidity stability — Condensation resistant — Suitable for extreme environments — Fast recovery time — Customer-specific sensor available upon request The IST AG MK33-W humidity sensor is available with CuP-SIL-wire post-plated with Sn or Au/Cu-wire as standard configuration.

The term "diode lines" dates back to the early days of hi-fi technology, when tubes were used in the output stages. Even today it is still used to describe cables for recording and/or playback connections between stereo equipment. Our diode cables with individually shielded wires are suitable for Chinch connections, pickup systems, stereophony and general applications in the LF range. Due to the relatively high-impedance input resistances, low-capacitance supply lines are required to avoid unwanted drop in height. 1- to 8-core constructions, each of which has low-capacitance PE insulation with individual core screening, meet these requirements. Core cross-sections of 0.08 mm² and 0.14 mm² are used.

The term "diode lines" dates back to the early days of hi-fi technology, when tubes were used in the output stages. Even today it is still used to describe cables for recording and/or playback connections between stereo equipment. Our diode cables with individually shielded wires are suitable for Chinch connections, pickup systems, stereophony and general applications in the LF range. Due to the relatively high-impedance input resistances, low-capacitance supply lines are required to avoid unwanted drop in height. 1- to 8-core constructions, each of which has low-capacitance PE insulation with individual core screening, meet these requirements. Core cross-sections of 0.08 mm² and 0.14 mm² are used.

The term "diode lines" dates back to the early days of hi-fi technology, when tubes were used in the output stages. Even today it is still used to describe cables for recording and/or playback connections between stereo equipment. Our diode cables with individually shielded wires are suitable for Chinch connections, pickup systems, stereophony and general applications in the LF range. Due to the relatively high-impedance input resistances, low-capacitance supply lines are required to avoid unwanted drop in height. 1- to 8-core constructions, each of which has low-capacitance PE insulation with individual core screening, meet these requirements. Core cross-sections of 0.08 mm² and 0.14 mm² are used.

The T660 is a moisture meter that you can connect to a PC with the use of a USB cable. The MultiMeasure Studio Software, free in the service/ download section of company website, can be used to measure values from the T660, online and in real time on any PC. The values of this item can be saved for later analysis and for use in report. There are a few practical benefits, with the measuring device being designed and produced in accordance to the highest quality standards. There are two premium components, constructed with the IP54 rating. The item comes with an easy to lean glass surface made of high scratch-resistant. The capacitive touch screen control panel and the high resolution color display for simultaneous indication of two measured values is another major advantage, while the quick and non-destructive determination of near-surface moisture distribution is another major advantage.

Industrial Panel PC solutions featuring a high quality and reliable touch panel with excellent display capabilities give high performance into the smallest package. Our all inclusive industrial panel PC range is designed to cover all requirements from compact PCs to high performance, PoE panel PCs, rugged IP65 & IP66 models meeting multiple industrial specifications. Touchscreen options include resistive, capacitive, SAW and Infra-Red as well as tempered glass versions. All have long lifetime supply and support roadmaps ideal for industrial and outdoor applications for example ticket vending machines (TVMs) and other custom projects Need a customised solution? CDS can build all industrial panel PC solutions and range to your exact requirements including LCD screens, processor, memory, storage and operating system options. All our PCAP panel mount and open frame industrial panel PCs in the table below have 4GB RAM + 64GB SSD as standard. All have USB / HDMI / VGA interfaces.

Option of interface transfer to HDMI via the universal controller board This TFT display provides a full view,Optional custom solution with capacitive or resistive touchscreen. The material is RoHS compliant.

5 inch Round TFT IPS LCD with high resolution provides clear and rich images, widely applied in commercial and smart home appliants. This Liquid Crystal Display has a built-in HX8399C controller. Optional custom solution with capacitive or resistive touchscreen. The material is RoHS compliant. Diagonal (inch): 5.0″ Resolution (pixel): 1080×1080 Display Type: IPS Display Mode: Transmissive Optimal View: Full View Touch Screen: Custom Module Dimensions (mm) (W x H x D): 136.53×132.20×1.98 Active Area (mm) (W x H): 127.00 x127.00 Luminance (cd/m2): 400 Interface: MIPI Driver IC: HX8399C Operational Temperature (°C): -20 ~ +70 Storage Temperature (°C): -30 ~ +80

This TFT display provides a full view. This Liquid Crystal Display has a built-in ST7262 controller. Optional with capacitive or resistive touchscreen. The material is RoHS compliant. Diagonal (inch):5 Resolution (pixel):800×480 Display Type:IPS Display Mode:Transmissive Optimal View:Full View Touch Screen:Optional Module Dimensions (mm) (W x H x D):120.70×75.80×2.80 Active Area (mm) (W x H):108.00×64.80 Luminance (cd/m2):300 Interface:RGB 24bit Driver ICST7262 Operational Temperature (°C):-20 ~ +70 Storage Temperature (°C):-30 ~ +80

This Liquid Crystal Display has a built-in ST7257 controller. Optional custom solution with capacitive or resistive touchscreen. The material is RoHS compliant. Diagonal:5 inch Resolution: 480×272 pixel Display Type:TN Display Mode:Transmissive Optimal View:12:00 Touch screen:Optional Module Dimensions (mm) (W x H x D):120.70×75.80×3.00 Active Area (mm) (W x H):110.88×62.83 Luminance (cd/m2):350 Interface:RGB 24bit Driver IC:ST7257 Operational Temperature (°C):-20 ~ +70 Storage Temperature (°C):-30 ~ +80

Our 5” TFT LCD module with full viewing angle. The full viewing angle feature allows the display contents of the LCD to be visible from practically any angle. It's a cost-effective enhancement compared to using an IPS display. The 5" TFT has 800 x 480 RGB resolution and supports 24-bit parallel RGB input mode. It also is available with either a resistive touchscreen or capacitive touchscreen panel. This 5 inch LCD is an ideal option for a variety of digital devices including video or POS systems.

AC/AC Power Source Power-Boost Series is a value for money cost-effective solution to meet the needs of Frequency conversion, Voltage regulation and Voltage stabilization. Power-Boost permits a high dimension power rate that can supply any load types (resistive, inductive and capacitive) with a perfect sinusoidal output waveform. AT A GLANCE: o Double Voltage Range Output [PH-N]: 2-150Vac & 4-300Vac o SS [1-phase input and output] o SS [1.5kVA - 3kVA – 5kVA - 7.5 kVA] o Frequency Regulation included [40Hz-80Hz] o LCD 7’’ touch screen o Current Regulation included o Sensing function included • Communication Interfaces (Remote Control): o Physical Interfaces: RS-232, Ethernet, 12 poles I/O o Communication protocols: SCPI (over RS-232 and Ethernet), 0-10Vdc (over analog I/O 12 poles), o LabView Drivers