Results for
BURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The DIGISTANT® model 4420 universal calibrator, built to use in the field, is ideal for checking and calibrating temperature measurement and control devices. The versatile functions of this portable unit allow to be used on-site or at a fixed location, on the test floor or in the laboratory. The unit allows the simulation and measurement of voltages, currents, temperatures and resistances.Simultaneous transmission and measurement allow, for example, controllers to be checked precisely. The automatic ramp function is used for controlling processes. The universal calibrator measures and simulates 14 models of thermocouples and Pt100. Features: Calibration and measurement unit for voltages, currents, temperatures and resistances All functions can be fully controlled and configured via RS232 interface Simultaneous transmission and measurement Automatic ramp function Simple menu assistance via display Voltage range ± 1 μV to ± 11.000 V Current range ± 200 nA to ± 22.000 mA
Request for a quoteKELLER PRESSURE
Switzerland
The HPX high-pressure calibrator is a high-precision calibration instrument for pressures between 0 bar and 700 bar. The functional calibrator is supplied in a sturdy carrying case and pressure can be quickly generated manually. It is therefore ideal for use in the field. The pressure is measured by the integrated LEX1 manometer and is both shown on the display and output via the RS485 interface. Additional functions such as zero point resetting, peak and trough pressure value indication and leak measurement make it even easier to take measurements.
Request for a quoteKELLER PRESSURE
Switzerland
The MPX pressure calibrator is a high-precision calibration instrument for pressures between -0,85 bar and 25 bar (after taring to ambient pressure). The functional calibrator is supplied in a sturdy carrying case and pressure can be quickly generated manually. It is therefore ideal for use in the field. The pressure is measured by the integrated LEX1 manometer and is both shown on the display and output via the RS485 interface. Additional functions such as zero point resetting, peak and trough pressure value indication and leak measurement make it even easier to take measurements.
Request for a quoteKELLER PRESSURE
Switzerland
The LPX low-pressure calibrator is a high-precision calibration instrument for pressures between -0,85 bar and 10 bar (after taring to ambient pressure). The functional calibrator is supplied in a sturdy carrying case and pressure can be quickly generated manually. It is therefore ideal for use in the field. The pressure is measured by the integrated LEX1 manometer and output both on the display and via the RS485 interface. Additional functions such as zero point resetting, peak and trough pressure value indication and leak measurement make it even easier to take measurements.
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The precision Pt100 simulator is used wherever measuring instruments or controlling systems have to be tested or calibrated with great precision. The standard version model 4506 simulates 24 set temperature values. Totally different temperature ranges are required in the case of special applications, such as in the food industry, the medical science etc. Model 4506 S is recommended for these applications and can be fitted with 24 temperature values according to customer specifications. A distinctive feature of these simulators is their simple operation. The resistance values required for simulation are directly set in °C. There is no need to use loof-up tables. Today in many cases a certificate is needed more than ever force measurements. This certificate is available under order code 45DKD-.. . Features: 24 set temperature values Calibration per DIN EN 60751 Resistor material: MANGANIN®, TK ≤ 10 ppm/K Pt100, Pt500, Pt1000 Available with DKD Certificate if required
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The precision calibration unit combines high accuracy, low drift, low noise and superior long-term stability with multiple functionality and simple operation. Ramps, Δ+/Δ-, and multiple setpoint storage make the operation of the device easier for the user. For that reason the application possibilities are many: — Calibration of current and DC-voltage meters — Precise testing of thermocouple temperature measuring instruments — Calibration of controllers, sensors, detection devices and other devices used in process control — Open-loop process control with the aid of integrated ramp function Features: — High precision current and voltage source ± 52 mA, ± 30 V — Option: ± 22 mA, ± 60 V — Precision simulation for all conventional thermocouple types (optional) — Error limit 0.003 % Rdg. — Standard with RS232 and IEEE488 interface, USB and Ethernet (optional) — Current "SINK"
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
Wherever temperatures are measured, temperatures must also be simulated. The Pt100-simulator is suitable for a wide area of applications. It has a wide range of simulation, which is resolved in 0.1 °C steps and makes many assignments in chemistry-, measuring-, controlling-, medicine and household applications, food industry, vehicle construction, air- and space travel and power plants easy to solve. Often in the past several simulators had to be used alongside to achieve either resolution or the range of the relevant application. As an extra advantage to the user temperatures can be entered in degrees celsius. Additional extensive conversions and readings in tabulation sheets are no longer necessary. Features: — Simulation range -100 °C up to +500 °C — Resolution 0.1 °C — Calibration in accordance to DIN EN 60751 — Simulation of line resistance 10 Ω, 20 Ω or 30 Ω — Sturdy aluminium-housing
Request for a quoteSULTAN AGRO IMPEKS
Uzbekistan
Looking for a reliable supplier of high-quality Black Eye Beans wholesale from Uzbekistan? Sultan-Agro is your partner for a successful business! We specialize in exporting premium black eye beans, offering various grades and forms to meet your business needs.
Request for a quoteBLOWERDOOR GMBH
Germany
Maintain the high accuracy of your BlowerDoor measuring technology by regularly submitting it to a calibration. Benefit from the high accuracy of the BlowerDoor measuring technology: At ± 4% or rather ± 5% (flow rings D + E), the accuracy of the BlowerDoor testing flow rings – as well as that of the pressure gauge DG-700 (± 1%) or DG-1000 (± 0.9 %) – clearly exceed the minimum legal requirements. The manufacturer’s calibration as well as the calibration with DAkkS-certificate, are subject to the highest quality standards. When calibrated, all measuring systems undergo a preceding functional test. If required, we will gladly provide you with a replacement device at favorable rates and conditions, while your BlowerDoor measuring system is being calibrated or repaired.
Request for a quoteTEST GMBH
Germany
Traceable calibration of testing machines and instruments is essential for industrial quality control. Calibration certificates are a compelling proof of test equipment inspection for the standards DIN EN ISO 9000ff and DIN EN ISO / IEC 17025. The time intervals for the calibration will depend on the applicable standard, but should normally not exceed 12 months. Attention should also be paid to the rules for local changes or repairs. Take advantage of our many years of experience in the field of calibration. TesT is accredited by the German Calibration Service (DAkkS, member of WECC) for on-site calibration of testing machines, for the quantities force, length and torque as well as a permanent laboratory for calibration of compressive force transducers
Request for a quoteSTL SYSTEMS AG
Switzerland
The High Resolution Voltmeter System, DX 005 / 020 from STL is designed in accordance with a delta-sigma converter concept that is for an effective signal readout from the different sensors that are used for quality control, production, laboratory, or field applications. It is engineered to provide high linearity and resolution stability of a calibration instrument whose system is capable of dealing with up to 3000 simultaneously measured channels.
Request for a quoteSTL SYSTEMS AG
Switzerland
The analogue to digital converter series of type „DX“ are specially designed for a large dynamic range and high stability, which makes them suitable for almost all applications.These ADC’s have internal digital calibrations resulting in highly significant signal output. Due to this digital signal processing, all signals have the identical transfer function which allows for high precise post-processing of the data. Highlights - Low power consumption - Very low noise, large dynamic range and high linearity - Digital temperature compensation minimizes drifts - Sensor output digitally error-corrected with respect to scaling and offset - Small size and lightweight - Single coaxial cable for power and data introduces minimal magnetic signature
Request for a quoteEFARGE MAKINA IMALAT SAN. VE TIC. A.S.
Turkey
Number Of Machine Heads : Variable Number Of Calibration Heads : 1-4 Calibration Disk Diameter : Ø700 Number Of Moving Polishing Heads : 4-12 Moving Polishing Disk Diameter : Ø550 Number Of Moving Polishing Disk Abrasives : 9 Max. Stone Width / Thickness : 650x100 mm Conveyor Belt Speed : 0-4 m/min Max. Belt Width : 800 mm Control System : PLC
Request for a quoteALPECO LIMITED
United Kingdom
Regular and Adhoc Fuel Calibration & Servicing It is recommended to have tanker meters calibrated on a yearly basis to ensure that they continue to give the correct measure. Alpeco is able to offer this service on a ‘when required’ basis, or a tailored yearly service contract is available, which also includes a thorough service to all Alpeco derived equipment on the customer’s installation. Alpeco is then able to seal the equipment for public use. All Alpeco reference meters follow the same stringent guidelines as applied to all Trading Standards instruments to ensure the utmost accuracy.
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The precision RTD simulator is used where measuring instruments or controlling means with high precision must be examined or calibrated. The simulator is suitable for calibration laboratory and service centers which need a computer-controlled resistance decade for the automation of calibration procedures. All standard platinum and nickel RTD can be simulated with very high accuracy according to scales ITS 90 or IPTS 68. Temperature regulators, transducers etc. often supply a pulsed signal current in order to reduce the self-heating of the RTD. Devices with electronic simulation of RTD are therefore inclined to swinging and do not function with this application. Features: — Simulation of Pt100, Pt200, Pt500, Pt1000, Ni100 and Ni1000 sensors — Accuracy 0.02 °C — Temperature scales ITS 90, IPTS 68 — Real Ohm simulation — Control manually or remotely via RS232/IEEE488/USB Converter
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
This high-precision calibration source is able to measure currents up to ±50 mA, voltages ±100 V and temperature setpoint values of 12 thermocouple types, including R, S, B, J, T, E, K and N. Voltage drops across the measuring leads can be easily compensated via the sense line. With “thermoelectric voltage simulation” you can enter °C, °F and K, the temperature scales ITS-90 or IPTS-68 and the reference junction type constant/external. Furthermore, when simulating thermocouples a calibrated external reference junction can be used, with the calibration data being taken into account in the device. The device can be operated both via the keypad and via the Ethernet and USB interface. Features: — DC voltage up to ±100.0000 V, ±0.002 % — DC current up to ±50.0000 mA, ±0.005 % - Thermocouple simulation of R, S, B, J, T, E, K, N, M, C, D, G2 - Automatic sequence function (ramp function)
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The 0.02 class calibration resistors excel in their modern design and small mechanical dimensions. Their ruggedness also ensures a long life. Calibration resistors of the 1240 series are used wherever very constant operating standards are required. Typical main areas of application therefore include: — When normal resistors prove to be too large scale — For test and calibration of resistance measurement devices — For tests on electrical temperature measuring equipment — For laboratory setup of a Wheatstone bridge — As shunt resistor for accurate current measurement — As part of standard equipment in research laboratories — For a large part of measurements in calibration laboratory. Features: — Range 10 μΩ ... 100 kΩ — Low capacitance and low inductance design — Suitable for direct current and technical frequencies — High stability < ± 0.01 % over years
Request for a quoteATEQ UK LTD
United Kingdom
The CDH6000 is a gas H2N2 (5% hydrogen) supply that checks the calibration of the H6000. It can be used with one or several calibrated leaks. The CDH6000 must be fitted with a calibrated leak to deliver a known quantity of gas H2 N2 (5% hydrogen) at a given pressure. If the pressure displayed on the gauge of CDH6000 does not exceed 1 bar, change the cartridge (maximum pressure: 4 bar) To purchase cartridges filled with gas H2 N2 (5% hydrogen) contact ATEQ. When the operator has finished using the calibrator CDH6000 disconnect the calibrated leak and store in its case and avoid the excessive pollution of the test area.
Request for a quoteATEQ UK LTD
United Kingdom
The CDP60 calibrator checks the pressure calibration of leak and flow measurement instruments as well as any other pressure measuring instrument. This light, compact and user friendly calibrator is essential for field or laboratory checks, when accuracy and repeatability cannot be compromised and large instrument are too bulky or too expensive. With the CDP, you can now easily check and follow the requirements of ISO or other quality standards. Pressure Calibration checking on Leak and Flow testers Checking of other types of pressure measuring instrument Automatic sleep mode Print out (USB or RS232) Battery level check LCD display (4 x20 characters) 1 year warranty Accessories : Carrying case, pressure generator (1000 Pa), pocket, protective holster.
Request for a quoteATEQ UK LTD
United Kingdom
The CDF60 calibrator checks the calibration of leak and flow ATEQ instruments as well as any other instrument. This light, compact and user friendly calibrator is essential for field or laboratory checks, when accuracy and repeatability cannot be compromised and large instrument are too bulky or too expensive. With the CDF60, you can now easily check and follow the requirements of ISO or other quality standards. Atmospheric pressure and temperature indicators Automatic sleep mode Print out (USB or RS232) Battery level check LCD display (4 x 20 characters) 1 year warranty Accessories: Carrying case, needle valve, soft case, protective holster
Request for a quoteATEQ UK LTD
United Kingdom
MULTI-RANGE LEAKAGE CALIBRATOR The CDF7000 allows you to check the calibration of leak and flow measurement instruments, as well as calibrated leaks and jets. This portable, compact and user-friendly instrument lets you adjust very accurately your leak or flow rate with a real time reading on the display. You can now guarantee the quality of your products, whilst also complying with the requirements of standards such as ISO 9001. Measurement in actual or standard conditions Different displays available (bargraph – curves) USA / SI units New ergonomy User-friendly interface Easy connection to the test instruments Time and date function Print out (USB or RS232) Improved resolution compared to previous CDF More than 8h battery lifetime Strong carry case Can be used for field as well as laboratory checks
Request for a quoteXINGTAI TRADE (H. K.) CO., LTD
China
Welded Link Chain AISI304 AISI316 Ground&Calibrated
Request for a quoteINNOVATIVE SENSOR TECHNOLOGY IST AG
Switzerland
Digital (I2C) module for relative humidity and temperature designed for excellent reproducibility and response time required in meteorological balloons and drones. Extra fast measurement. Suitable for operation measurement down to -80 °C.
Request for a quoteINNOVATIVE SENSOR TECHNOLOGY IST AG
Switzerland
HYT271 MK33 in a robust and compact screw-in stainless steel housing with a metric M14 thread. Ideal for test measurements in an industrial environment. Sustains -40°C to +120°C and 0 to 100%RH (water activity aw). Digital I2C interface over 0.5m cable. Compatible with HYT Test board (USB or 0 to 10V analog outputs). This functional prototype is intended for easy evaluation of oil sample compatibility. Please contact us for support during your tests and to discuss the design of an OEM sensor probe tailored to your application.
Request for a quoteENVEA
France
The MGC101 system automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases.
Request for a quoteKELLER PRESSURE
Switzerland
Calibration software for the conductivity sensor of 36XiW-CTD level probes.
Request for a quoteResults for
Calibrators - Import exportNumber of results
111 ProductsCountries
Company type
Category