Calibration of measurement instruments - Import export

High-precision angle measuring system with +/-0.1s accuracy for measuring and calibration applications. The signal sampling is done by an interferometric operating principle (laserscale) The graduation period is 1µm, the generated signal period of the output signal is 250nm. Scale errors are self-compensated by using six reading heads in a special arrangement. The measured values can be output in csv format via the USB interface. The software for measured value acquisition and storage is included in the scope of delivery.

The MPX pressure calibrator is a high-precision calibration instrument for pressures between -0,85 bar and 25 bar (after taring to ambient pressure). The functional calibrator is supplied in a sturdy carrying case and pressure can be quickly generated manually. It is therefore ideal for use in the field. The pressure is measured by the integrated LEX1 manometer and is both shown on the display and output via the RS485 interface. Additional functions such as zero point resetting, peak and trough pressure value indication and leak measurement make it even easier to take measurements.

The LPX low-pressure calibrator is a high-precision calibration instrument for pressures between -0,85 bar and 10 bar (after taring to ambient pressure). The functional calibrator is supplied in a sturdy carrying case and pressure can be quickly generated manually. It is therefore ideal for use in the field. The pressure is measured by the integrated LEX1 manometer and output both on the display and via the RS485 interface. Additional functions such as zero point resetting, peak and trough pressure value indication and leak measurement make it even easier to take measurements.

The HPX high-pressure calibrator is a high-precision calibration instrument for pressures between 0 bar and 700 bar. The functional calibrator is supplied in a sturdy carrying case and pressure can be quickly generated manually. It is therefore ideal for use in the field. The pressure is measured by the integrated LEX1 manometer and is both shown on the display and output via the RS485 interface. Additional functions such as zero point resetting, peak and trough pressure value indication and leak measurement make it even easier to take measurements.

The precision calibration unit combines high accuracy, low drift, low noise and superior long-term stability with multiple functionality and simple operation. Ramps, Δ+/Δ-, and multiple setpoint storage make the operation of the device easier for the user. For that reason the application possibilities are many: — Calibration of current and DC-voltage meters — Precise testing of thermocouple temperature measuring instruments — Calibration of controllers, sensors, detection devices and other devices used in process control — Open-loop process control with the aid of integrated ramp function Features: — High precision current and voltage source ± 52 mA, ± 30 V — Option: ± 22 mA, ± 60 V — Precision simulation for all conventional thermocouple types (optional) — Error limit 0.003 % Rdg. — Standard with RS232 and IEEE488 interface, USB and Ethernet (optional) — Current "SINK"

With our UV probes, we offer calibrated probes for measuring of the irradiance in areas that are difficult to access. The UV probes are available in three versions and several standard lengths of 15 cm to 60 cm. With an outer diameter of only 6 mm, the UV probes are a perfect supplement for the precise radiometers RMD, as well as for the spectral radiometers UVpad E and SR900. All UV probes come with a diffuser, which enables the absolute measurement of irradiance and which ensures the required cosine correction during a non-perpendicular irradiation. The UV probes are, together with the radiometers, traceably calibrated to the PTB, recalibratable and are supplied with a calibration certificate by the factory. By using appropriate materials, an outstanding long-term stability is reached. A repair service and parts supply is of course available for many years.

The CDP60 calibrator checks the pressure calibration of leak and flow measurement instruments as well as any other pressure measuring instrument. This light, compact and user friendly calibrator is essential for field or laboratory checks, when accuracy and repeatability cannot be compromised and large instrument are too bulky or too expensive. With the CDP, you can now easily check and follow the requirements of ISO or other quality standards. Pressure Calibration checking on Leak and Flow testers Checking of other types of pressure measuring instrument Automatic sleep mode Print out (USB or RS232) Battery level check LCD display (4 x20 characters) 1 year warranty Accessories : Carrying case, pressure generator (1000 Pa), pocket, protective holster.

MULTI-RANGE LEAKAGE CALIBRATOR The CDF7000 allows you to check the calibration of leak and flow measurement instruments, as well as calibrated leaks and jets. This portable, compact and user-friendly instrument lets you adjust very accurately your leak or flow rate with a real time reading on the display. You can now guarantee the quality of your products, whilst also complying with the requirements of standards such as ISO 9001. Measurement in actual or standard conditions Different displays available (bargraph – curves) USA / SI units New ergonomy User-friendly interface Easy connection to the test instruments Time and date function Print out (USB or RS232) Improved resolution compared to previous CDF More than 8h battery lifetime Strong carry case Can be used for field as well as laboratory checks

This set of calibration wires is used to adjust the correct position of the seaming rolls in relation to the seaming chucks.

The certification of gauges is based on checking that the instrument maintains the prescribed measurement tolerances and MSA processes that confirm the stability of the measurement process of the gauge used in different conditions and by different people. Tests and control and measurement devices undergo the process of checking the current state, and then we carry out the calibration process and recertification. We carry out the certification and calibration process of the gauges in accordance with the procedures resulting from ISO 17025 , which confirms the credibility of our work. At the client's request, we perform work in accordance with the requirements and processes resulting from the individual features or parameters of a given measuring instrument. Calibration of the gauges Calibration is an integral part of the construction and production processes of control and measurement devices and gauges, and is also used during service or repair work.

Model 9180 supports force, pressure and torque sensors operating on the strain gauge principle, as well as the connection of position and angle sensors in potentiometer or DC/DC configuration. It also allows the measurement of process signals ± 1 V/ 5 V/ 10 V or 0 ...1 mA, 0(4) ... 20 mA. The current measured value is indicated on the 14 mm high LED main display, while a second display located directly below provides a reading of the peak value. The display is particularly suitable for highly accurate measurements due to the high accuracy of 0.1%. It is also possible to monitor up to 4 limit values and provide the results via relay or transistor outputs. Thus the process value display can be used for classification, process and control tasks. The current measured value is frozen on the display by activating an external HOLD signal. The TARE function is useful for balancing out previous loads for example.

The SENSORMASTER 9163 covers a wide range of applications in which process values need to be measured, displayed, analyzed and transferred to higher-level control systems. Typical applications include measuring geometric values in production, for instance differential measurements, or testing material properties in the laboratory. The measured values can be transferred via USB, RS232 or analog output. Features: — For force, pressure or torque measurements using strain gauge sensors — For position or angle measurement using potentiometric or DC/DC sensors — For temperature measurement using Pt 100 sensors or thermocouples — Optional multi-channel model — Optional Profibus or serial interface — 0.1 % measurement accuracy plus sensor-specific linearization — Range of mathematical functions (e.g. differential measurement) — OK/NOK feedback on multi color display and via 4 alarm limit outputs — High sampling rate (500/sec.)

Based on its specifications, this device can be used in various applications. It is especially suitable for resistance measurement on insulating materials such as e.g. cable insulations, foils, textiles, surfaces, insulating liquids,etc. With a test voltage of 45 V, 100 V, 250 V and 500 V the device fulfi ls most test specifi cations such as e.g. DIN 51953, 53482 and 54345. The guard switching allows single resistance measurements in a triangle wiring. This could be e.g. a two line cable with common shield or the measurement of insulating materials on a guardring measurement cell. The selection of the measurement range is done manually or automatically. Fast subsequent measurements can be realized by the internal limit value indicator. When the measured value exceeds the limit the limit value indicator switches and activates a potential-free relay output. The megohmmeter RESISTOMAT® model 24508 is the right instrument for its use in laboratory as well as in industrial applications.

RESISTOMAT® model 2408 megohmmeter has been especially developed to measure extremely high resistance values with a high degree of accuracy. This instrument has a specifi cation that makes it suitable for all common applications. The measurement voltages equal those given in the DIN test regulations (e.g. DIN 51953, DIN 53482, DIN 54345, DIN 57281 and DIN 57411) for measuring the electrical resistance value across fi lms, fl oor coverings, test equipment, cables, moldable materials, rubber, plastics, insulating oils and the like. Features: — Resistance range from 1 kΩ ... 100 TΩ — Current range from 0.1 pA ... 1 mA — Autorange — Test voltage selectable from 1 V ... 1000 V — Limit indicator — Measurement results storable on external USB flash drive — RS232 interface (USB and Ethernet optional)

The RESISTOMAT® model 2329 is particularly suitable for fast measurements of low resistances in automated processes. Up to 50 measurements per second can easily be performed. The device complies with the latest CE guidelines and is designed for laboratory use as well as heavy-duty industrial applications. A 2-fold and 4-fold comparator with switching outputs has been included for classifi cation and selection; this feature is particularly useful for serial tests. One special application involves the measurement of contact resistances (dry-circuit measurement); the load voltage in this case is limited to 20 mV in order to prevent fritting (DIN IEC 512). The RS232 (standard) and IEEE488, USB and Ethernet (option) computer interfaces allow the set-up of fully automatic testing stations. The PLC interface allows easy integration into your production process control.

Fast and accurate measurements of the smallest resistance values are possible with the milliohmmeter RESISTOMAT® model 2316. Due to the rugged aluminium injection moulding desktop housing with membrane keypad it is suitable for use in laboratory and industrial environment likewise. Wires and coils can be measured with temperature compensation. The temperature of the sample is measured with a Pt100 or pyrometer and the resistance is then corrected to the equivalent at e.g. 20 °C (adjustable) in the instrument. The application range is very wide such as the measurement of: — transformer motor coil windings — coils of all kind — cables and wires on the drum or as meter samples — switch and relay contacts — heating elements — fuses — connections and transitions at power rails and many more Specific characteristics: — Autorange — Temperature compensation for all materials — Thermal e.m.f. compensation — Input voltage protection up to effectively 400 V rms

Robust and highly accurate incremental probes with magnetic operating principle and USB interface for easy evaluation. The gauges are available with the following measuring ranges: 10mm / 25mm / 50mm / 100mm. Extremely insensitive to contamination such as oil mist, moisture and dust. Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring fixtures, assembly and manufacturing plants. A simple evaluation software for the USB interface is included.

Counter display for connection of up to two DK probes with adapter cable CE29. Various data outputs can be made possible by installing expansion cards BCD output with LZ71-B card (optional) Comparator function: relay / open collector output with LZ71-KR (optional) Peak value acquisition / hold function Various input functions especially for automated measurements Selectable display resolution Data storage Reset/Preset/Restart With reference point recognition of the connected measuring units Scaling function Flicker control

High precision incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines

High accuarcy incremental length probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines

1 or 2 channel multifunctional display for DT series probes. Perfectly suited for quick and easy measured value evaluation in assembly and production plants. The display has a comparator function with switching outputs for connection to the PLC for fast pass/fail evaluation. The displays can be easily installed in the front panel Measuring modes: ACTUAL, MAX, MIN, P_P Addition and subtraction function: A+B, A-B Comparison function: setting of upper/lower limits; GO / NO GO via NPN open collector output Start/hold function

High-precision absolute angle encoder with flat design with integral bearing Magnetic operating principle therefore extremely insensitive Perfectly suited for applications in CNC machine tools such as rotary tables Serial interfaces for Siemens and Fanuc. Siemens version with Functional Safety certification.

Read head for connection to position indicators LG20 and LH70 series Output signal: TTL A/B quadrature signal, compliant with EIA-422 Maximum resolution: 10μm Maximum response speed: 300m/min (varies depending on read head and setting) Extremely insensitive to even the harshest environmental conditions (IP65) Resistant to oil, dust, vibration and shock

The Cygnus 2+ metal thickness gauge has an endmounted rotatable display designed for rope access work, providing a safer environment when working at height. As with all Cygnus thickness measurement instruments, the Cygnus 2+ uses the multipleecho mode for measuring through thick coatings (up to 20 mm thick in Deep Coat mode). As well as this, the Cygnus 2+ thickness gauge also incorporates the singleecho mode for measurements on uncoated surfaces with heavy front face and/or backwall corrosion, and the echoecho mode for measurements on painted metals with heavy back wall corrosion and pitting using a variety of portable UTM probes. Offering maximum strength and environmental protection, the Cygnus 2+ metal thickness tester is certified to stringent US MIL STD 810G standard and IP67.

The probe's measurement data can be sent to a PLC via Ethernet, EtherNet/IP, PROFINET or EtherCAT fieldbus Fieldbus compatible interface module: MG80-NE (Ethernet) / MG80-EI (EtherNet/IP) / MG80-PN (PROFINET) / MG80-EC (EtherCAT) Up to 16 MG80-CM counter modules for measuring probes can be connected to each main module. Up to 64 MG80-CM or touch probes can be connected to MG80-NE via max. 3 LINK connections Up to 255 MG80-CM or measuring probes can be connected to MG80-EI/PN via LINK connections. Theoretically, up to 65,535 MG80-CM or mestasters can be connected to MG80-EC via LINK connections. MG80-CM Counter module for connection of one DK or DT series probe (with MT13) Easy installation on DIN mounting rail LZ80-K1/K2 I/O module for MG80-EI, MG80-PN and MG80-EC Equipped with 8 inputs and 8 outputs

Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Extremely robust against oscillations and vibrations due to the Ø 32mm clamping shaft. The probe pin (without spring) is fixed with a magnetic tip on the surface of the measuring object. This allows the change in position of the target to be detected with high accuracy. Perfect for position detection of machine axes.

Highly accurate absolute angle measuring system with flat design and integrated bearing. Magnetic operating principle therefore extremely insensitive Perfectly suited for applications in CNC machine tools such as rotary tables. With serial interfaces for Fanuc, Mitsubishi and Yaskawa CNC available.

Interferometric angle measuring system, non-contact, open design for resolutions of up to 1.5nrad. The BH20 angle measuring system in open non-contact design is based on interferometric signal scanning. It offers extremely high resolutions and repeatability. The interferometric scanning produces an extremely high signal quality with extremely low noise.

Incremental length probe with magnetic detection principle for high reliability. Very high accuracy and repeatability Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines