Results for
PATELEC-ELPENA SP. Z O.O.
Poland
In Dutex s.r.l. Patelec produces customized wire harnesses, cords and cable assemblies with simple finishing as faston and housing, shrink tubing, clamps, inductors, resistors, or even complex assemblies.
Request for a quoteBELIT ELEKTRONIK LTD
Turkey
Cut to length, crimped and labeled electrical cable. Escubedo multisplices terminals crimped to the end.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
TEXTALU® E is a thin wall glass fibre braid made of glass fibres with heat-reflecting aluminium coating. Its reflecting surface guarantees that the protective sleeve made of this high-performance material maintains a nearly constant interior temperature even under strongly fluctuating ambient temperatures. This non-ductile braid sleeve is ideal for protecting lines, cables and cable sets against radiation heat.
Request for a quoteSFS GROUP GERMANY GMBH
Germany
The FireBird® Gold Edition sets blind rivet nuts up to M8 all materials with 20.000N traction power • Drill-on of the blind rivet nut with reduced • torque and automatic switch-off • Triggering the setting process clearly • separated from the drill-on action • Automatic drill-out function after the end of the setting process • Drill-off with high torque • Sturdy, compact and shockproof tool housing Ergonomics • Fatigue-free working through well balance weight repartition and ergonomic grip • Easy stroke adjustment with Li-Ionen-Energy • High energy yield due to high voltage • Low weight allows for extremely easy and fast operation • Extremely low self discharge • New battery shape allow the tool to be stored standing on its battery • Constant setting speed • Automatic switchover from setting to drilling • Fast and simple change system for threaded mandrels More details on delivery limits will be answered in a specific enquiry (details are only exemplary)!
Request for a quoteSFS GROUP GERMANY GMBH
Germany
With a force of 15,000 N and the tried-and-tested brushless motor, the FireBird® Pro CAS is powerful and fast when setting blind rivet nuts of up to M8 steel. Since no wear-prone brushes are used, the motor has an extremely long service life, is virtually non-wearing and reliably guarantees the fastest setting frequencies. The setting tool is controlled solely by the setting force adjustment. The thread of the blind rivet nut is therefore optimally protected while ensuring the blind rivet nut is securely anchored in the material. With the 18-volt battery power supply, the tool is suitable for flexible, cordless use on construction sites and in industrial manufacturing. The mechanism for triggering the riveting process is functionally separated from the drilling process and, once the riveting process is complete, the FireBird® Pro CAS provides an automatic drilling function. More details on delivery limits will be answered in a specific enquiry (details are only exemplary)!
Request for a quoteEAE ELECTRIC
Turkey
Stainless Steel Cable Ladder Sets the industry standard for cable support systems worldwide. It has an unique combination of high strength, flexibility and lightweight design. Designed for maximum carrying strength in its class, high resistance to impact and environmental factors.
Request for a quoteEAE ELECTRIC
Turkey
GRP Cable Tray & GRP Cable Ladder Sets the industry standard for cable support systems worldwide. It has a unique combination of high strength, flexibility and lightweight design. Designed for superior load strength in its class, superior resistance to impact and environmental factors.
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Set of self-adhesive cable clips. For securing 1, 2, 3 and 4 USB cables. • Self-adhesive cable clips for 1, 2, 3 and 4 USB cables for tidy cable management • Can be used on smooth, clean surfaces • Ideal for quickly organising telephone or USB cables up to a diameter of 5 mm • Ensure added safety at the workplace • Contents: 2x clips each for 1, 2 and 3 cables, 1x clip for 4 cables • Made from flexible plastic
Request for a quoteWALTER UHL TECHNISCHE MIKROSKOPIE GMBH & CO. KG
Germany
completely with joystick and set of cables hand or remote controlled RS232 interface 2 or 3 axis version
Request for a quoteTELEDYNE ICM
Belgium
The CPSERIES audible flashing light is a 3 colors (red, green and orange) warning light that is combined with an audible siren, which is compacted into a reinforced housing attached by a 20 meter long connection cable. Various settings are available and these can be controlled via the POWERBOX. This accessory includes a 1/4-20UNC thread for mounting the light onto a magnetic foot or tripod.
Request for a quoteTELEDYNE ICM
Belgium
The flashing light on the CPSERIES is a single red warning light in a reinforced housing that is attached by a 20 meter long connection cable. Two settings are available and controlled by the POWERBOX. The flashing light includes a 1/4-20UNC thread that enables the light to be mounted on a magnetic foot or a tripod.
Request for a quoteBELIT ELEKTRONIK LTD
Turkey
6 sq mm grounding cables with ring terminals. For the needs of companies producing in the field of electromechanical production, we are able to produce from single grounding cable to a set of several
Request for a quoteCARBOMECH SP. Z O.O.
Poland
Type 3-201 to 3-212 shaft cable clamps made of stainless steel are used to mount cables in mine shafts, and they have been designed for application in both non-methane and methane fields of underground mining facilities. A prerequisite of correct operation of self-locking clamps is the appropriate clamp choice depending on the cable diameter as well as proper setting of the cable clamping jaws. Type 3-201 to 3-212 clamps are available in an option enabling shaft bracket mounting.
Request for a quotePFLITSCH GMBH & CO. KG
Germany
Smart cable routeing for individual cable layouts PFLITSCH has been setting the industry standard with its Industrial-Trunking. With 13 different cross sections from 50 mm x 50 mm to 600 mm x 150 mm, about 80 accessory fittings and cover variants, the system has a suitable solution for every situation. The trunking can be opened over its total length to allow preassembled cables to be placed or removed quickly and easily. Your advantages: Safe cable routeing for large cable volumes Different cover variants – including hinged Press-fitted, self-securing domed nuts for vibration resistance and proven equipotential bonding Comprehensive edge protection at the sheet edges, low-burr cut edges UL and VDE tested
Request for a quoteORBITEC GMBH
Germany
Proper purging is absolutely essential to guarantee high-quality welding of high-alloyed, corrosion-resistant components. As part of this the Oxy EVO oxygen analyser can be connected to our orbital welding controllers for the purpose of inspecting and documenting the residual oxygen content and evaluated. — Extremely easy menu navigation — For inert gases and gases containing H2 (max. 10%) — Measuring cell made of zirconium oxide (maintenance-free) — 3.5" colour touch display — USB interface for exporting documentation — Digital and analogue interface and Bluetooth for communication with our orbital welding controllers and other PSPS — Activation and evaluation exclusively using the digital interface — User-definable threshold and alarm adjustment — Acoustic signal generator ... Package includes: — Oxygen analyser — Power cable — Hose set, 3 m, incl. filter and probe — Calibration certificate — Transport case
Request for a quoteGEBUWIN
Netherlands
The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...
Request for a quoteGEBUWIN
Netherlands
The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
GEBUWIN
Netherlands
The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...
Request for a quoteGEBUWIN
Netherlands
The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...
Request for a quoteGEBUWIN
Netherlands
The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...
Request for a quoteGEBUWIN
Netherlands
The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...
Request for a quoteGEBUWIN
Netherlands
Over the years, Gebuwin has developed many custom made winches. Some winches we developed on the basis of a one off project, others as a serial product. The serial project winches have actually become standard products. These winches are readily available and can be found at the bottom of the page. With regards the one off project winches, we offer an overview which gives an impression of all the possibilities. Consider the following: a longer and/or bigger cable drum, different gearing ratios (set of gears), self braking capacity of the worm gear system, different cable exit, specialized protection covers, torque limiter for the cable drum or the crank, various drive shaft speeds, different positioning of the drive shafts, use of other materials (e.g. stainless steel), improved surface coating in accordance with DIN 12944 up to classification C5. Whatever your wishes: Gebuwin thinks along with you and offers solutions. Apart from our standard delivery programme, we are the...
Request for a quoteGEBUWIN
Netherlands
Over the years, Gebuwin has developed many custom made winches. Some winches we developed on the basis of a one off project, others as a serial product. The serial project winches have actually become standard products. These winches are readily available and can be found at the bottom of the page. With regards the one off project winches, we offer an overview which gives an impression of all the possibilities. Consider the following: a longer and/or bigger cable drum, different gearing ratios (set of gears), self braking capacity of the worm gear system, different cable exit, specialized protection covers, torque limiter for the cable drum or the crank, various drive shaft speeds, different positioning of the drive shafts, use of other materials (e.g. stainless steel), improved surface coating in accordance with DIN 12944 up to classification C5. Whatever your wishes: Gebuwin thinks along with you and offers solutions. Apart from our standard delivery programme, we are the...
Request for a quoteGEBUWIN
Netherlands
Over the years, Gebuwin has developed many custom made winches. Some winches we developed on the basis of a one off project, others as a serial product. The serial project winches have actually become standard products. These winches are readily available and can be found at the bottom of the page. With regards the one off project winches, we offer an overview which gives an impression of all the possibilities. Consider the following: a longer and/or bigger cable drum, different gearing ratios (set of gears), self braking capacity of the worm gear system, different cable exit, specialized protection covers, torque limiter for the cable drum or the crank, various drive shaft speeds, different positioning of the drive shafts, use of other materials (e.g. stainless steel), improved surface coating in accordance with DIN 12944 up to classification C5. Whatever your wishes: Gebuwin thinks along with you and offers solutions. Apart from our standard delivery programme, we are the...
Request for a quoteHERBERT WALDMANN GMBH & CO. KG
Germany
The workplace-system luminaire WLA illustrates just what flexibility looks like. Versions in four different lengths provide individual lighting for any table width in a wide range of industrial applications. To minimise installation work even at daisy-chained workplaces, the concept enables multiple luminaires to be through-wired. — LED technology — Colour temperature neutral white 5000 K — Colour rendering Ra > 80 — Glare-free thanks to structured cover — Housing made of colourless anodised aluminium and grey plastic — PC screen — Mounting by means of T-slots (8 mm) or luminaire bracket (accessories) — Switch for On/Off — Degree of protection IP20, protection class I — Supplied with built-in Wieland GST18i3 connector / socket (luminaires with through-wiring) — Accessories: Cables, Luminaire bracket sets
Request for a quoteMAXON MOTOR AG
Switzerland
EPOS Positioning made easy. EPOS is a modular, digital positioning controller by maxon motor. It is ideal for permanent-magnet activated brushed DC and brushless DC motors with incremental encoders and an operating range of 1 to 700 W. The wide range of operating modes combined with various command interfaces allow for versatile use in a wide range of drive systems in the fields of automation and mechatronics. EPOS2 See the «Feature Chart» for a quick overview of the entire EPOS2 product range and to compare the different models. EPOS3 EPOS2, EPOS2 P, EPOS3 and MCD Setup (complete version) The installation includes: EPOS Studio 2.1 (graphical user interface) EPOS2 firmware 0x2126 EPOS2 P firmware 0x0205 EPOS3 firmware 0x2211 Open PCS2008 programming environment for EPOS P Documentation (Feature Chart, Release Notes, Getting Started, Cable Starting Set, Hardware Reference, Communication Guide, Firmware Specification, Programming Reference, Supervisory Control Reference, and Application Notes)EPOS (Easy Positioning System) with CANopen or EtherCAT interface and Interpolated Position Mode.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
A comprehensive 50 piece insulated tool set - 1000V, VDE & GS certified. Set includes: Screwdrivers: PH.1 x 80mm, PH.2 x 100mm, PH.2 x 150mm; Slotted: 2.5 x 75mm, 3 x 100mm, 3.5 x 100mm; TX: T20 x 100mm, T25 x 125mm, T30 x 150mm; circuit tester. 3/8" socketset: sockets 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 & 22mm, 3/8'' extensions 150 & 250mm, 3/8" ratchet, 3 spline bits: M8, M10, M12. Pliers set: cable shears, bent nose pliers, long nose pliers, flat nose pliers, side cutters, water pump pliers and an insulated cable stripping knife. Plus 10 protective 100mm sleeves: 5 x 18mm and 5 x 24mm.
Request for a quoteINTEGRA CABLE
Belarus
Spiral clamp is designed for mounting a self supporting fiber optic cable to the light poles, towers of high voltage lines, the contact networks of railways, buildings and structures. The clamp consists of a power section, which is a U shaped strand of several spiral wires, fastened together with a special solution, on the inside of which an abrasive is applied. The protector for additional protection of the cable is a set of individual spirals or glued strands.
Request for a quoteResults for
Cable sets - Import exportNumber of results
69 ProductsCountries
Company type
Category