C-goods - Import export

iglidur® C500 Up to +250 °C, wear-resistant. iglidur® C500 can be used up to 250 °C, extremely media-resistant – including in cleaning processes with hydrogen peroxide – wear resistant, with low friction values. Also suited for a wide range of custom geometries or piston rings. High resistance to media and temperature Long-term service temperature +250°C Good coefficients of friction and wear Lubricant- and mainteance-free

iglidur® X: The high-tech troubleshooter When it's hot, iglidur® X is the right solution. This is true both literally and figuratively, for instance with extreme chemicals. The interesting thing is the abrasion resistance actually increases at high temperatures. iglidur® X is available as cylindrical bearings, plain bearings with flange and thrust washers. For operating temperatures from -100°C to + 250°C in continuous operation Very good chemical resistance High compressive strength Lowest humidity absorption Extremely wear resistant for the entire temperature range

• The face shield is made of 1,4 mm thick Triacetate • Excellent optical quality • High resistance to temperature extremes up to approx. +150°C • Good UV protection • Lower notched impact strength

• The face shield is made of 1,15 mm thick Cellulose Acetate • Excellent optical quality • Resistance to temperature extremes up to approx. +90°C • Good resistance to chemicals • Lower notched impact strength • Also available with non-fogging treated inner side

• The face shield is made of 2 mm thick Polyphenylsulphone (PPSU) • Excellent optical quality • High resistance to temperature extremes up to approx. +220°C • Good UV protection • High impact strength

• The face shield is made of 1 mm thick polycarbonate • Excellent optical quality • Additional glare protection due to green tinting (welding protection shade 2,5) • High resistance to temperature extremes approx. –50°C to +135°C • Good UV protection • High impact strength (B – 120 m/s)

• The face shield is made of 1 mm thick polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. –50°C to +135°C • Good UV protection • High impact strength (B – 120 m/s) • Also available with non-fogging treated inner side

• This face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to +135°C • Good UV protection • High impact strength • The face shield has recesses on the side and is a perfect fit on the ear protection hard hat bracket • Also available with non-fogging treated inner side

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extemes approx. -50°C to +135°C • Good UV protection • High impact strength • IR-protection shades 4-4 and 4-5 available • Additional protection of neck and chin due to fully enclosed face shield

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to+135°C • Good UV protection • 94% of the radiant heat is reflected by the gold layer • IR-protection shade 4-5

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extemes approx. -50°C to +135°C • Good UV protection • High impact strength • IR-protection shades 4-4 and 4-5 available • Additional protection of neck and chin due to fully enclosed face shield

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to+135°C • Good UV protection • 94% of the radiant heat is reflected by the gold layer • IR-protection shade 4-6

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C bis +135°C • Good UV protection • High impact strength • Additional protection of neck an chin due to fully enclosed face shield • Also available with non-fogging treated inner side

• The face shield is made of 1 mm thick polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. –50°C to +135°C • Good UV protection • High impact strength (B – 120 m/s) • Additional protection of neck and chest area due to the large PVC-bib • Also available with non-fogging treated inner side

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to +135°C • Good UV protection • High impact strength • 94% of the radiant heat is reflected by the gold layer • IR-protection shade 4-4

• The face shield is made of 1 mm thick polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C bis +135°C • Good UV protection • Additional protection of the forehead due to the extended face shield • The face shield fits on the GFKKH100 headgear

High-performance superplasticizer for medium slump and high slump concrete with good slump retention for precast and ready-mix concrete. Very strong increase of workability and/or reduction of w/c-ratio; good slump etention; high early strength development.

Superplasticizer for concrete with improved surface finish and high early strength, preferably in the precast plant, e.g.facade elements, structural elements, retaining wall elements, steps etc. Strong increase of workability and/or reduction of w/c-ratio, good homogeneity even with low amounts of fines in the mix.

• Individually adjustable, comfortable headgear • The head width is adjusted by means of a ratchet wheel • The head height can be adjusted with a perforated strip • The forehead padding is replaceable • The face shield is made of 1 mm thick polycarbonate • The face shield can be lifted and locked in any position by a threaded connector • Excellent optical quality • High resistance to temperature extremes approx. –50°C to +135°C • Good UV protection • High impact strength (B – 120 m/s) • Additional protection of the forehead due to the extended face shield

ISOVAL® A is prepared from glass fabric impregnated with the standard version of the ISOVAL® epoxy system. Laminates exhibit high mechanical strength with good dynamic properties up to 120°C, very good chemical resistance as well as excellent thermal endurance properties up to 155°C. The fine glass fabric combined with a special epoxy resin gives a very smooth surface and enables finest drillings to be done.

• Individually adjustable, comfortable headgear • The head width is adjusted by means of a ratchet wheel • The head height can be adjusted with a perforated strip • The forehead padding is replaceable • The face shield is made of 1 mm thick polycarbonate • The face shield can be lifted and locked in any position by a threaded connector • Excellent optical quality • High resistance to temperature extremes approx. –50°C to +135°C • Good UV protection • High impact strength (B – 120 m/s) • Additional protection of the forehead due to the extended face shield

ISOVAL® A is prepared from glass fabric impregnated with the standard version of the ISOVAL® epoxy system. Laminates exhibit high mechanical strength with good dynamic properties up to 120°C, very good chemical resistance as well as excellent thermal endurance properties up to 155°C. The fine glass fabric combined with a special epoxy resin gives a very smooth surface and enables finest drillings to be done.

Short description: Hochtemperaturbeständig High-temperature-resistant and strong silicone adhesive and sealant. Especially suited for heat-loaded, elastic adhesive bonding and sealing. Very good adhesion on steel, aluminium, glass, ceramic and many other materials. Applications: Industrial furnaces, Flue gas boxes, Heating facilities, Exhaust pipes and Heating cabinets and furnaces. The outstanding product properties (e.g. permanent elasticity) are maintained in the entire temperature range from -60°C to +300°C. Properties: High temperature resistance up to +300°C, Very good UV stability, Excellent resistance to weathering and aging, Good chemical resistance, Elongation to break approx. 500% and Colour: red.

For chemicals and acids in high concentrations and at high operating temperatures to max. 220° C. Version with good bending properties. Conforms to DIN EN 12115. For information on temperature and media resistances please see our Simon resistances chart. Construction: Black, electrically conductive FKM tube Tension and pressure-resistant fabric inlays Embedded copper wire Optional: Concealed steel spiral Weather-resistant, electrically conductive, abrasion-resistant CR cover Interior and exterior smooth, fabric patterned or corrugated *) Spiral hose version **) Applies only to operation at minimum 1 bar, otherwise risk of hose kinking Other versions and dimensions on request.

STOL®76M is a modified version of the STOL®76 alloy. In its tinned version it has reduced peelingoff effects depending on the usage conditions. The improved properties are of particular interest for connectors used in the automotive, electrical and electronics sectors. The alloy combines high electrical conductivity, medium to high strength and good relaxation resistance up to an operating temperature of 150°C, combined with good formability.

The ISOPREG® KB resin system is an epoxy G11 system by Isovolta which has a long term temperature resistance of 200°C. The reactive resin with good storability is used for high pressure laminating. Isopreg® KB Prepregs are only available with dry tack.

The ISOPREG® KB resin system is an epoxy G11 system by Isovolta which has a long term temperature resistance of 200°C. The reactive resin with good storability is used for high pressure laminating. Isopreg® KB Prepregs are only available with dry tack.

The ISOPREG® KB resin system is an epoxy G11 system by Isovolta which has a long term temperature resistance of 200°C. The reactive resin with good storability is used for high pressure laminating. Isopreg® KB Prepregs are only available with dry tack.