Button cells - Import export

The tension & compression load cells from the 8523 series are designed for a wide range of uses. The sensors feature many benefits, including three point-contact mounts for tilt-free installation. Thanks to this feature, excellent measurement results can be achieved even with a sub-optimum mounting surface. The force to be measured is applied to the central threaded hole in the tension or compression direction. For measuring purely compressive loads, using load buttons from our accessories range saves the need for complex sensor-integration mechanisms. Tensile loads in rods or chains can also be detected with ease using the optional pull plate. Inside the sensor is an elastic membrane, on which are applied strain gages connected in a full Wheatstone bridge. FEATURES Measuring ranges from 0 ... 20 N to 0 ... 5 kN Tilt-free installation thanks to point-contact mounts Excellent price/performance ratio Easy mounting burster TEDS optionally available

Due to their small dimensions and sturdy construction, these miniature compression load cells made of stainless steel can be used in a wide range of industrial applications and in laboratories. This compression load cell is easy to handle and its installation is uncomplicated. Its small size makes it perfect for use in very restricted structures for both static and dynamic compression force measurements. The miniature compression load cell model 8415 is a flat cylindrical disc, the bottom of which is closed with a cover. The load application button for receiving the compression forces is an integrated part of the sensor. A strain gage full bridge is applied in the gauging member of the measuring element. This produces bridge output voltage directly proportional to the measured force. The small diameter of the sensors results in high rigidity and a short measurement range. The measuring force has to be applied centrically and free from lateral forces.

This force measurement chain was developed for applications where a low cost solution is more important than achieving high levels of accuracy. The sensors strain gauge technology allows the measurement of static and dynamic forces. The load cell is also designed for applications that provide only little space due to its compact design. These properties, together with the sensors dust protection, make the measuring chain suitable for a wide range of applications, such as Industrial manufacture Manufacture of customized machinery Geological investigations Motor vehicle engineering Commercial agriculture Bridge building The body of the sensor is a flat, cylindrical disk, into which a domed force application knob is integrated. It is important that the force is applied axially to the center of the sensor. The domed form, however, minimizes the effect of a force that is not exactly axial.

These models are among our most precise and yet mechanically robust miniature load cells. High accuracy, finely graded measuring ranges, small dimensions and the simple introduction of force via opposing threaded pins open up a wide scope of laboratory and production applications. Their sophisticated engineering with integrated support membranes and overload protection reduces additional design expense in many applications, e.g. for external overload protection or guiding the parts introducing force to the cell. The result is that less space is required, less material is used and less weight is involved. Last but not least, there is hardly any friction on components that could falsify the measurement result. The force to be measured is introduced centrally and axially to the cylindrical sensor body in the tension or compression direction by means of the two threaded pins. This requires the sensor to be mounted without any elements touching the end faces of the sensor housing.

The model 8527 high-precision compression load cell is the ideal load cell for reference measurement chains where highly precise measurement results are required. Its very high production quality and extremely low non-linearity of just 0.035 % F.S. make it a dependable choice for comparative measurements and calibration tasks. Designed for a dynamic stress of up to 100 % of the full scale value, the model 8527 load cell is also suitable for situations where a rapid signal change with high amplitude occurs and has to be measured. The model 8527 high-precision compression load cell has a domed load button on top, onto which the compressive load being measured is applied. Inside the load cell is an elastic membrane, on which strain gages generate a resistance change in the measuring bridge and an output signal proportional to the load. For the best possible measurement results, the force should be applied axially and centrically to the load button.

The 8524 precision tension & compression load cell is a versatile sensor for highly accurate load measurements in diverse applications. Optimum measurement quality is achieved with the load cell mounted on a flat, hard and polished contact surface. This requirement does not apply to small measurement ranges of up to 0 ... 2 kN because three knife-edge bearings ensure that the sensor is seated securely. Our brochure „Load Cells“ explains how you can design parasitic loads out of your mechanical system. Through-holes in the outer flange are used for fastening the 8524 sensor to the system structure. The load is applied via the central blind threaded hole or optionally via a load button. Alternatively, a pull plate and even rod end bearings, if desired, can be attached to the sensor for equally easy measurement of purely tensile loads, for instance in Bowden cables or chains. The 8524 sensor is designed to measure static, quasi-static and dynamic compressive and/or tensile loads.

Wheat Straw and ABS keychain torch. 1 LED and battery powered (button cells included). Wheat Straw logo and presented in an individual recycled bag. Made from vegetal elements to promote the use of natural raw materials and reduce pollutant emissions. 1 Led. Button Batteries Included Wheat Straw/ ABS

Feature 1.Main components: ABS, speaker,magnet,PCB board,Button Cell, wires, IC, etc. 2.OEM/ODM of music&logo design are welcome,send us in JPG, PDF, AI format files 3.Send us your sound file with MP3 Or WAV format 4.Music duration can be 1-270s 5.The color are available in white+red ;white+black etc or customized 6.Use:will play music automatically when open a beer lid; can Stick on metal for decoration 7.Great for trade show giveaways, promotion; clever gift etc.

Football and golf Shaped Bottle Opener Feature 1.Main components: ABS, speaker,magnet,PCB board,Button Cell, wires, IC, etc. 2.OEM/ODM of music&logo design are welcome,send us in JPG, PDF, AI format files 3.Send us your sound file with MP3 Or WAV format 4.Music duration can be 1-270s 5.The color are available in white+red ;white+black etc or customized 6.Use:will play music automatically when open a beer lid; can Stick on metal for decoration 7.Great for trade show giveaways, promotion; clever gift etc.

Digital kitchen scale K7912 in glass max 5000g size: 205x165x17mm LCD display battery: 1x3V CR2032 button cell

3 in 1 Multi functional fitness rack baby gym play sleeping mat with animal rattle Toy Age:0M + Quantity/CTN:8 Pieces Inner:0 CBM:0.315 m³ Packaging size:70*9*58.3 cm Product Size:111*100*54 cm Carton size:70*60*75 cm Quantity/20ft:704 Pieces Quantity/40ft:1,472 Pieces Quantity/40ft HQ:1,720 Pieces G.W. /N.W. :14.5/13 kgs Battery:2*AG13 BUTTON CELLS(INCLUDED) Packaging:WINDOW BOX Test standards:EN71/EN62115/AZO/GCC/10P

3 in 1 Multi functional fitness rack baby gym play sleeping mat with animal rattle Toy Age:0M + Quantity/CTN:8 Pieces Inner:0 CBM:0.315 m³ Packaging size:70*9*58.3 cm Product Size:111*100*54 cm Carton size:70*60*75 cm Quantity/20ft:704 Pieces Quantity/40ft:1,472 Pieces Quantity/40ft HQ:1,720 Pieces G.W. /N.W. :14.5/13 kgs Battery:2*AG13 BUTTON CELLS(INCLUDED) Packaging:WINDOW BOX Test standards:EN71/EN62115/AZO/GCC/10P

Designed to be extremely discrete fitting within the light fixture. Accurate light level switching with 10 Amp load rating. Encapsulated for harsh environment and to combated luminaire or fixture condensation

Designed to operate on 12V to 48V DC power input. Accurate light level based 10A load switching. Ideal for marine, mining, industrial applications