Brake pads - Import export

Product intended for cleaning and degreasing of the car’s brakes. Removes sediments deposited as dust or grease on the discs and brake pads

It cleans calipers and linings, discs, drums, brake center cylinder, clamps, springs and clutch parts in the brake system and increases the holding feature. Thanks to its special formula, it provides cleaning of grease, tar and other oils that have formed layers by combining with dust without much effort. You can also use the package by turning it 180 ° upside down.

We are currently able to offer brake pads in all of the standard UIC shapes for Siemens Desiro, Tren Ligero, Southern 455, 422 TR and other passenger trains. Brake pads specifications meet all the requirements and standards of UIC.

Wide range of brake discs

Material: CuZn33 Properties: electrical and thermal conductivity We produce our STAX brass fibers MS67 in the grades coarse with an average fiber strength of approx. 120 μm, medium 90 μm and fine 60 μm. STAX brass fibers MS67 are available as following: Strand on reels with defined weight per meter and a width of 100 mm Short fibers according to customer requirement Fleece on bales with defined weight per square meter Applications for our STAX brass fibers MS67 are basically for friction material as for brake pads and clutches. If you are looking for brass fibers for your specific application, please do not hesitate to contact us.

Material: E-Cu58 Properties: good electrical and thermal conductivity We produce our STAX copper fibers Cu99 in the grades coarse with an average fiber strength of approx. 120 μm, medium 90 μm and fine 60 μm. STAX copper fibers Cu99 are available as following: Strand on reels with defined weight per meter and a width of 100 mm Short fibers according to customer requirement Fleece on bales with defined weight per square meter Applications for STAX copper fibers Cu99 are found in friction material as brake pads or clutches, further in plastic compounds, for shielding, in sport floors, on thatched roofs against growth of moss, as electrical and thermal conductor in different versions. If you are looking for copper fibers for your specific application, please do not hesitate to contact us.

Material: 1.4113 (X6CrMo17-1) AISI 434 Properties: heat-, corrosion- and acid-resistant, magnetizable We produce our STAX stainless steel fibers 1.4113 in the grades coarse with an average fiber strength of approx. 120 μm, medium 90 μm, fine 60 μm and on demand extra fine 30 μm. STAX Edelstahlfasern 1.4113 are available as following: Strand on reels with defined weight per meter and a width of 100 mm Short fibers according to customer requirement Fleece on bales with defined weight per square meter Applications for STAX stainless steel fibers 1.4113 are for friction material as in brakes pads, further as filter material or special round filters (as well in half-round version, see photo), sound damping or -insulation. If you are looking for stainless steel fibers for your specific application, please do not hesitate to contact us.

With the Therma friction thermocouple you can determine the surface temperature of the brakes while driving. Attaching the mounting adapter puts uniform pressure on the brake disc through the spring-loaded sensor by using a bayonet cap. That perfectly compensates movements caused by centrifugal force and vibrations as well as the volume decrease caused by disc wear while ensuring a valid measurement. The brake disc friction sensor measures the surface temperature of the brake disc. It imparts important insights about the temperature development. That enables an indication about the brake line, intake and temperature radiation. A brake disc that becomes too hot during a race massively loses its effectiveness and deceleration to the accustomed and optimal degree is no longer possible. If the temperature is too high, the brake pads start gassing on top of that.

Safety Clamping for Rail Systems Holding force 540 N Always on the safe side: The safety clamping elements LOCKED SL clamp and brake directly on the clear area of guide rails on linear modules with forces of up to 10,000 N. They are individually adjusted to the linear guide being used and are available for all rail sizes from 20 to 65 mm and profiles from all renowned manufacturers. Special brake pads made of low wear sintered metal are used for the additional emergency stop braking functions in the safety clamping elements LOCKED SL. The SL product family offers optimum static clamping with a service life up to 1 million cycles or up to 500 emergency braking operations. They also offer low system costs in comparison with hydraulic and electric solutions.

INOX® Brake Cleaner is a highly effective cleaning agent for drum and disc brakes, brake linings and pads, clutch linings and pressure plates, as well as all parts in and around the motor vehicle which are contaminated with oil, grease, etc. Due to the high proportion of active ingredients, an intensive and fast-acting cleaning is achieved. No residues remain. It is not corrosive and generally does not attack rubber and plastics. However, due to the variety of plastics on the market, a compatibility test is recommended.

The Industrial TactArray is a flat sensor that can capture and map pressure distribution in even the most extreme conditions. Constructed from high-quality Kapton or Polyimide, the Industrial TactArray can pressure distribution of up to 700 psi and in temperatures between -40° C and 200° C. This system is best suited for use in applications requiring tactile sensors that can withstand extremely high temperatures and pressures—like heat presses, brake pads, and nip rollers. Key Features High-resolution sensor arrays can measure pressure distribution at levels of up to 700 psi and retain performance characteristics in temperatures between -40° C and 200° C Real-time thermal compensation ensures accurate measurements even under changing temperature conditions Ultra-thin construction, 0.3 mm thick, and high-resolution sensing elements Can accommodate moderate flexing and bending Available in multiple sizes and configurations Chameleon Visualization Software included

In addition to purely switching sensors, your sensor specialist EGE also offers you inductive proximity switches with analogue output for measuring tasks. The analogue signal is proportional to the approximation of the metal part. This sensor is also available in a version up to 160° C. The proximity sensor is based on the proven inductive principle: When metallic objects come close, the resonant circuit of a coil is dampened through induction and an analogue signal generated from it. Analogue inductive are e.g. suitable for the double occupation control of metal plates, for the tensioning control of wire or for monitoring metallic brake pads.

Klineks formulation uses to clean for brake components of vehicles and working machines

Klineks formulation uses to clean for brake components of vehicles and working machines.

K2 ROTON spectacularly penetrates and removes any stubborn dirt, including sludge from the brake pads and dirt road. At the time of the dissolution of impurities K2 ROTON turns dark red color, giving the impression of "bleeding wheels", which means that accession to flush. Removes dirt without the risk of scratching the surface. Safe for all kinds of rims and caps.

- other contaminants from brake drums. linings, pads, cylinders - springs. As an aerosol it can be precisely sprayed on areas requiring cleaning. - Easily - quickly removes contaminants - Dries fast - leaves no residue - Minimises disc brake squeal - Can be applied without disassembly of brakes - Has no flash point

Disk brake pads for commercial vehicles. ECE R90 approved. Applicability: Mercedes, DAF, MAN, Scania, Iveco etc. Braking system: Knorr SB 7 WVA: 29059, 29061, 29087, 29108, 29163, 29179, 29202, 29201, 29105

Brake pad and brake shoe range – over 2000 part references are available Range of R90 approved brake shoes and brake pads available All friction materials are Semi-Metallic & 100% Asbestos Free Exceptional performance, product life and brake component compatibility Reduced disc wear, brake noise and brake judder Excellent brake fade characteristics Unique friction material keeps your wheels up to 80% cleaner Friction material gives more bite, shorter stopping distances in all conditions

we are producing brake pad and brake lining if you like we have ready factory for sell

we are selling brake pad and brake lining production plant and know how.