Results for
EMSIL TECHTRANS SRL
Romania
Our Emtech brand with rotary tables Horizontal Boring & Milling Machines HBM, HBMI, HBMT HBM, HBMI, HBMT
Request for a quoteEMSIL TECHTRANS SRL
Romania
displaceable rotary tables are intended for increasing the technological possibilities of the horizontal boring and milling machines with moving column
Request for a quoteEMSIL TECHTRANS SRL
Romania
Perfect for vertical boring and milling
Request for a quoteEWS WEIGELE GMBH & CO. KG
Germany
EWS takes measures against vibrations in deep drilling procedures Deep drilling procedures with drilling rods with a long overhang are one of the most demanding tasks in cutting technologies. What influences vibration, what amplitudes does it create, what is the effect of superimposed vibration and when are uncontrollable resonances encountered? All these are questions that are difficult to answer using theory alone. These findings formed the basis for the new development of EWS Rigid. The objective was to create a drilling holder with a passive damping system to counteract the vibrations that are created. This involves using variable vibration dampers with linear degrees of freedom in a floating mounting inside the cutter carrier. The damper position is set using a radially mounted setscrew, which allows optimum vibration conditions to be created. The improvement in surface qualities of bores is significant, as is the increase in the service life of cutter tools.
Request for a quoteMEBEL LOGISTIC POLAND
Poland
Metal furniture accessories
Request for a quoteMEBEL LOGISTIC POLAND
Poland
Metal furniture accessories
Request for a quoteMEBEL LOGISTIC POLAND
Poland
Metal furniture accessories
Request for a quoteMEBEL LOGISTIC POLAND
Poland
Metal furniture accessories
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
Synchronising pulley H-Profil imperial pitch H for cylindrical bore
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
Synchronising pulley XL-Profil imperial pitch XL for cylindrical bore
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
Synchronising pulley HTD-Profil metric pitch HTD14 for cylindrical bore
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
Synchronising pulley HTD-Profil metric pitch HTD8 for cylindrical bore
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
Synchronising pulley HTD-Profil metric pitch HTD5 for cylindrical bore
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TRACTO-TECHNIK GMBH & CO. KG
Germany
For directional and non-directional bores, For pipe lengths up to 18 m, For bores up to 3 m beneath the ground water level, Maximum outer diameter of the bore hole up to 1400 mm, Maximum lengths up to 120 m, A variety of different bore heads, rock boring heads or in-hole-hammers are available, depending on the soil quality.
Request for a quoteSCHÜTZ GMBH MESSTECHNIK
Germany
foldable carpet probe (carbon-fibre) 180mm diameter wheel. Bore-hole probe (carbon fibre). Bell-probe funnel for attachment. Telescopic aeriel probe. Instrument filter. Carry-strap. Carry-case. Charger not included. Gas detector not included
Request for a quoteSCHÜTZ GMBH MESSTECHNIK
Germany
With the telescopic aerial probe, any gas traces that may be present can be better detected. This is particularly recommended in pedestrian zones. Due to the high suction power of the extraction system, the gas concentration in the ground is already very diluted. However gas may still be later detected - but not with the telecopic aerial probe. Depending on the requirements, the telescopic aerial probe can be clicked into place quickly.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
PEKI float valve series made of high quality hot pressed parts and precision turned parts, assembled with modern injection moulded parts and sealing elements made in Germany . Compact design with high filling capacity manufactured in brass, chem nickel-plated and stainless steel.
Request for a quoteNORELEM FRANCE
France
These eccentric bushes can be used as e.g. stops or tolerance compensators. 1) DIN 332-1 centre bore, Form A 2) Basic form with centring 3) With scale groove for visual stop 4) Through hole 5) Tapped hole Advantages: Easy handling Grub screw clamping Minimal installation space Arbitrary mounting position Customised application Versatile use
Request for a quoteNORELEM FRANCE
France
The mandrel collet is used in small through bores to position and clamp workpieces. Clamping is carried out manually from above using a hex key. The mandrel diameter can be ground to suit the application. The bore for the mandrel should have an H7 tolerance. D min = smallest permissible diameter to which D can be ground. applicable for holes from Ø5 to Ø12.5 mm compact design, small installation space simple handling mounting in any position different installation types possible surface pressure protects the workpiece surface individually adaptable to the diameter Technical data: The tightening torque max. Nm given in the table refers to the spanner size AF2. Assembly: If required, diameter D can be adapted to suit the diameter being held. To do this, expand the mandrel collet ca. 0.2 mm over the required diameter. Grind the OD of the mandrel collet to suit the ID of the workpiece bore.
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
Synchronising pulley MXL-Profil imperial pitch MXL for cylindrical bore
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
Synchronising pulley L-Profil imperial pitch L for cylindrical bore
Request for a quoteFRANKE GMBH
Germany
For optimal functioning of the wipers, the holes in the guide rails should be closed with plastic covers, which are included with every delivery. As a replacement, you can also order them individually.
Request for a quoteRÖMHELD GMBH FRIEDRICHSHÜTTE
Germany
clamping range 16 - 21,9 mm with centring function 50 bar, as per data sheet B1.481
Request for a quoteRÖMHELD GMBH FRIEDRICHSHÜTTE
Germany
clamping range 22 - 27,9 mm with compensation 75 bar, as per data sheet B1.481
Request for a quoteResults for
Boring - Import exportNumber of results
134 ProductsCountries
Company type
Category