Boilers for industrial use - Import export

heating elements for household and industrial electric boilers

Modernisation pays off: The average service life of boiler systems that are used for industrial purposes is between 20 and 40 years. Many measures which previously were not possible or financially justifiable pay off nowadays after a very short period of time. Five good reasons to modernise your energy generating system: — Reduce operating costs — Security of supply — Structural adjustments — Sustainability — Maintaining legal conformity

Steam is a pressure vessel manufactured to store excess steam or waste vapors out of the operation of aquaria and to be used again when necessary. They are mainly used in gas concrete installations especially for the purpose of recovering the waste steam from the process. There are water and vapor phase zones in the steam chamber. The volume is 4/3 water phase. Steam The steam is stored in the battery in the hot water phase by injecting the steam into the water by means of the diffusers located below the water level and dissolving it in the water. When the steam is needed, the pressure of the hot water is lowered and the steam produced by the resulting phase change is transferred to the process to be used again. Using a steam bath; Up to 25% energy saving is achieved. They can both discharge steam and discharge at the same time. Suspended solid materials which are dragged together with the steam collapse under the liquid and the bluff is removed from the environment and the steam is

Steam boilers with water pipes are boilers in which the water circulates and evaporates in the pipe. This high-capacity, high-capacity, high-capacity steam boiler. The combustion chamber is surrounded by a pipe-pipe-pipe joint. As a fuel in water pipe steam boilers; They use solid fuel, liquid fuel and gas fuel. n terms of safety, the water is more secure due to circulation in the pipes. Because of their lower water volumes, they are boilers that enter the regime more quickly.

Bundles are used for generating superheated, saturated steam and hot water to meet the requirment of process by utilising waste heat in power plants. We manufacture bundles according to ASME and EN standard with high frequency welded fintubes which is produced by Eralp. *We are manufacturing Solid and Serrated Type. *We can weld fin material thickness between 0,8 mm - 2 mm for high frequency welded spiral finning tubes. *It is possible to weld fin thickness less than 0,8 mm but it is not recommended. *Pitch distance is determined according to pipe diameter and thermodynamic calculation. We are able to manufacture fintubes pitch in the range of 3,5 - 20 mm.

Burner head for industrial boiler

Our latest 250 kW boilers are extremely efficient, using an advanced dual stage burner, 3-way valve system and smart controls to optimise temperature control and minimise fuel burn and emissions. From a small footprint we’ll deliver maximum heat output, with temperatures up to 90ºC and pressures up to 10 bar. Canopy casing has a small footprint for ease of transportation. Cast iron 3-pass flue boiler allows for excellent combustion, stable temperatures and reduced short-cycling. Dual stage burner accurately matches fluctuating heat requirements and achieves lower emissions at part-load operation. Integrated 3-way valve ensures operating temperature is quickly achieved, maintains tight temperature control and reduces short-cycling. Able to communicate with building management systems and plant equipment. Electronic controls closely regulate and stabilise temperatures and offer advanced fault-finding capabilities. Master/slave configuration delivers load-on-demand functionality

IFYIL PELLET HEATING SYSTEM STOVE BOILERS WOOD HVAC Özerteknik A.Ş. Company has been existing in heating sector for 28 years and established İfyıl Termo İklimlendirme San. ve Tic. Ltd. Şti. Industry Company in 2009 for the brand name “IFYIL” offering modern innovative solutions for heating systems. İfyıl Termo factory was established on 6.000 m2 of a total area of 20.000 m2. Company has already achieved an image and prestige on the market with 70 professional staff with the most modern know-how. In this regard, priorities of R & D Department of İfyıl Termo İklimlendirme are efficiency, energy saving and comfort. İfyıl Termo already has been exporting to more than 25 countries with increasing number of demands. İfyıl quality has been embracing the world day by day with various eco-friendly models. İfyıl stoves have unique ergonomic design with its compact, modern appearance and all in one mechanical structure.

The construction of a boiler involves a diverse range of materials and components, broadly categorized into boiler steels, structural steels, and bought-outs (BOs). These materials are chosen based on factors like weldability, strength, and compliance with safety standards to ensure integrity and reliability.

— For the recovery of heat from desalinated water/condensate — Increase in system efficiency of up to 2% — Reductions in fuel, cooling water and waste water costs — Fast and easy assembly, requires just a small number of connections before it can be used Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— For recovering heat from flash steam from thermal water treatment — Heat recovery and thus efficiency improvement — Energy produced can be used for additional heating or for transfer to a separate water circuit Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— For maintaining constant pressure — Preassembled for fast installation — Increased operating reliability — Can also be configured for liquid biofuels and special fuels on request Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

The water analyzer measures residual oxygen concentration, pH values and conductivities of the boiler feed water and pH values of the boiler water. — For the fully-automatic measurement and monitoring of the boiler water quality — Increase in operating safety thanks to continuous monitoring of the water values — Automated monitoring with constant measurement of the pH value, oxygen content and conductivity — Savings on chemicals thanks to needs-based dosing of additives — Increased system efficiency through reduced desalting losses and saving of exhaust vapour energy — A water analysis device can monitor up to three boilers at a time and be integrated into plant control systems with control technology

— For intelligent control of multi-boiler systems and individual boiler systems — Easy connection to higher-level visualisation and control systems — Integrated monitoring and protection functions to prevent faulty operation — Extensive storage of operating parameters and operating signals — Secure remote access via MEC Remote — Intuitive operation with graphical symbols and state-of-the-art touchscreen displays

— For the prewarming of viscous fuels — Suitable for all Bosch boiler systems with oil burner and ring mains supply — Increased operating reliability — Can also be configured for liquid biofuels and special fuels on request Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— Fully automatic softening of the fresh water prevents the formation of limescale — Reliably soft feed water for preventing calcification of the boiler surfaces — Ensures efficient heat transfer, high efficiency and long service life of the boiler — High level of operational reliability and integration into the boiler control system — Needs-oriented automatic operation possible for unsupervised operation, even with fluctuating raw water hardness — Ideal in combination with the fully automatic water analysis device

— For the extraction of the feed water/condensate — Consumes less power, more convenient to operate — Speed-controlled version for increased flue gas heat exchanger efficiency — Redundant pump for maximum reliability of supply — Preassembled for fast installation Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— For the reliable fuel supply with oil — Preassembled for fast installation — Reliable recording of oil throughput — Can also be configured for liquid biofuels and special fuels on request Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

The steam boiler CSBs low emissions already comply with future requirements of the MCP Directive (EU) 2015/2193. — Large output range from 300 to 23,600 kg/h for pressures ranging between 0.5 and 16 bar — High efficiency thanks to the integrated economiser and helical heat exchanger pipes — Versatile design for use with different fuel types and as a multi-fuel firing unit (oil, natural gas, bio gas, up to 20 % hydrogen) — Compliant with even strict emission levels when used in combination with our burners and controls — Telescopic reversing chamber makes cleaning, maintenance and inspection simple — Easy to operate with CSC boiler control (up to 4,000 kg/h) and boiler control

— For distributing the steam mass flow to the relevant consumers — Reduction in network loss due to centralised distribution in systems with complex consumer structures — Savings thanks to centralised operation and maintenance Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— For the cooling of blow-down water and the recovery of heat from desalinated water/condensate — Increase in system efficiency of up to 2% — Reductions in fuel, cooling water and waste water costs — Rigorous compliance with official requirements thanks to automatic operation — Fast and easy assembly, requires just a small number of connections before it can be used

— Save up to 1.8% in fuel costs through a higher level of waste heat utilisation — Easy retrofitting to older systems thanks to a small space requirement and simple piping — Matched control for safe operation of the boiler and components — Quick amortisation, even on systems with few operating hours — Ready for operation with just a few connections — Simple commissioning, operation and maintenance

— Blow-down, expansion and cooling module for cooling blow-down water to the permissible temperature — Fast and easy assembly, requires just a small number of connections before the Blow-down, expansion and cooling module can be used — Rigorous compliance with official requirements thanks to automatic operation

— For increased system efficiency and reduced fuel consumption of up to 2% — Prewarming of the combustion air takes over a small portion of the thermal output of the burner — Lower investment costs in comparison with conventional solutions, low amortisation time — Lower maintenance and servicing costs

— For the reliable fuel supply with oil — Suitable for all Bosch boiler systems with oil burner and ring mains supply — Preassembled for fast installation — Can also be configured for liquid biofuels and special fuels on request Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— Secure use of condensate in steam boiler systems — Decreases in energy and water consumption due to reduced quantities of make-up water — Minimisation of flash steam losses, desalting and blowdown quantities; reduced consumption of chemicals — Reduced corrosion potential in the steam condensate system when using high-pressure condensate systems

— For continuous feed water control — Increased efficiency of flue gas heat exchangers — Fewer pump circuits — Constant boiler water level — Minimum flow rate for cooling the feed pump is assured Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— For the reliable fuel supply with gas — Preassembled for fast installation — Rigorous compliance with official requirements — Increased operating reliability — Also for biogas- and hydrogen-fuelled systems Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

LIQUID AND GAS FUEL, SCOTCH TYPE THREE-PASS, HIGH PRESSURE STEAM BOILERS 175 kg / h - 28.000 kg / h steam production capacity 3 - 16 bar operating pressure •Products can burn fuels such as natural gas, lpg, lng, diesel, fuel oil, biogas. You can choose the burner brand according to your request. EKOTEK, Trademark registered and controlled and audited by ISO 9001: 2015 quality management system.