Biogas - Import export

Automatic parallel online determination of (bio)methane potential is essential to ensure the effectivity of biogas production. Yieldmaster simplifies the search for the right substrae and guarantees maximums yields for your biogas process. Using Yieldmaster minimum gas flows are not necesseray. The Yieldmaster (BCS-CH4 biogas) consists of CH4 infrared gas sensors, precision volumeters and BAcVis or BlueVis software. It can be used from small vessels (500mL) up to big lab fermenters. Data is recorded consistently. Using date from the integrated temperature measurement BacVis or BlueVis calculate the standard volume automatically. Sensors measure directly in the fermenter which means no data is lost and errors caused by gas leakage etc. are minimized. The compensating reservoir device guarantees complete measurement under all circumstances. In combination with BlueVCount (Yieldmaster 2.0) simultaneous measurement of methane and gas volumes is feasable.

The robust BCP-CH4 methane sensor is based on infrared gas measurement techique and is available in 2 different wavelengths. Minimum flow is not needed and it can be integrated directly into the gas pipe. A gas cooling is no longer required. Monthly adjustment can be done with fresh air. The sensor is longterm stable and IP65 accredited. The production of methane in biogas plants (methane digester) can be monitored by the BCP-CH4 sensor which helps to optimize the process control. By using BCP-CH4 in block heat and power plants the actual efficiency can be determined.

Soft gasholders serve as a transfer point between the reservoir and the compressor, ensuring the smooth operation of the entire system. With the help of flexible air ducts, the ends of gas holders are connected to the gas-equalizing pipeline, and then to the entire gas-leveling system. The main feature of soft containers, favorably distinguishing them from metal, reinforced concrete and plastic, is the convenience of their operation. Such containers can be stored and transported in a folded form and deployed when installed on site. Therefore, they are easy to transport from one facility to another, to mount and dismantle without any special equipment. Soft tanks can be installed on unprepared areas, they can easily be delivered to hard-to-reach places - tanks in folded form can be transported by car. Two to three workers can handle the installation in a few hours. Another important feature of soft containers is their incomparable ease.

OVER 45 YEARS’ EXPERIENCE IN AGRICULTURAL BIOGAS PLANTS When deciding on a biogas plant, the manufacturer’s experience should be prioritised. It is not just a question of economic viability, but essentially of optimal design. Lipp GmbH has over 45 years’ experience in this area and is continually developing the technology. The biogas plants manufactured by Lipp are based on a rounded plant concept in terms of consulting, development, manufacture and assembly. With its comprehensive expertise and the use of proven technologies such as the Lipp dual seam system, the material Verinox, and high quality accessories, the highest level of quality is achieved with optimum economic efficiency.

FLEXIBLE POST DIGESTERS FOR INCREASING BIOGAS YIELD LIPP offers three flexible Post Digesters for ensuring the effective utilisation of residual gases and improving efficiency which can be tailored to the requirements of each individual biogas plant. LIPP Universal Digester LIPP KomBio Reactor LIPP Eco Post DigesterCan be integrated in existing plants Flexible diameter and height Minimal installation space required Short installation time Durable tanks and covers Consistent quality worldwide Individually customisable based on customer’s requirements ROOFS AND COVERS PRODUCT SPECIFICATIONS LIPP POST DIGESTER THE RIGHT POST DIGESTER FOR ANY TASK The LIPP Universal Post Digester (with digester chamber volumes from 200 to 5,000 m3) comes with the high quality LIPP stainless steel diaphragm cover and is designed for use with an external gas accumulator. It is particularly suitable for the collection of residual gases and for improving efficiency.

LIPP® Gas Accumulators were developed as a system for the nonpressurised storage of dry gas which has been used for over 300 projects worldwide over the past years or more. Sizes from 30 to 5000 m³ are available according to the gas yield in each case. The gas accumulator consists of two parts a bubbleshaped storage balloon and a steel container to protect the balloon against mechanical damage and the effects of weathering. Speciality Accurate level measure of stored gas. In biological processes, gas production is not continuous. That is why the utilisation of gas (e.g. in a combined heat and power plant) requires an accumulator in order to compensate for fluctuations during gas production and to bridge downtimes for plant repairs and maintenance. Besides high functional and operating safety, other important criteria for the construction and operation of gas tanks include the economic aspects of investment and maintenance costs.

WASTE TO ENERGY INDUSTRY BIOGAS FROM ANAEROBIC WASTE WATER TREATMENT AND WASTE FERMENTATION PLANTS. Due to their technical characteristics and profitability, Lipp tank and system solutions are used in a variety of industrial biogas plants. Two areas of application can be distinguished, which in many cases also follow both objectives. APPROPRIATE PROCESS TECHNOLOGY, SUITABLE CONTAINER TECHNOLOGY AND THE RIGHT DIMENSIONSFirst, the anaerobic treatment of various industrial waste waters, such as in food production, biofuels or similar. The main objective here is the anaerobic pretreatment of highly contaminated but easily degradable waste water to reduce the COD load before it can go to the next stage of aerobic waste water treatment. The challenge is that in spite of the low DM content, a high degree of degradation is achieved by biomass retention or return and at the same time, biogas is produced. Due to the flexibility and variability of the Lipp system in terms of procedures

WIDE RANGE OF TANK ACCESSORIES FOR TECHNICAL EQUIPMENT Whether grain silos, biogas systems or liquid manure containers, Lipp places the greatest importance on quality, safety, a long service life and cost efficiency over its entire product portfolio – including accessories. The whole is more than the sum of its parts. That is especially true for Lipp container solutions and systems as special attention is paid to all parts – including tank accessories – to ensure quality, safety, longevity and cost efficiency. A broad range of technical tank accessories is available for all containers. Some are produced in house and some are purchased via partners or carefully selected suppliers with whom Lipp has established long term relationships based on trust. ACCESSORIES Container bottoms Container insulation Pumping and stirring technology Overflow gutters Container heating Steps, platforms and operating bridges Overpressure and underpressure protection devices Pipeline construction

Both systems are also ideally suitable for feeding pigs and cattle. They enable the feed to be used in an energy saving and environmentally friendly way which is fully automated and not dependent on the weather. As far as the use of renewable raw materials in biogas plants is concerned, besides being suitable for automation this system offers the benefit of significantly reduced retention time in the digester, making it extremely efficient and economical. All containers benefit from the familiar advantages provided by the tried and tested LIPP Double Seam System and the LIPP material VERINOX. These two systems have been proving their agricultural worth in terms of liquid preservation for more than three decades.

COST EFFECTIVE SYSTEM FOR THE NON PRESSURISED STORAGE OF BIOGAS, LANDFILL GAS AND SEWAGE GAS In biological processes, gas production is not continuous. That is why the utilisation of gas (e.g. in a combined heat and power plant) requires an accumulator in order to compensate for fluctuations during gas production and to bridge downtimes for plant repairs and maintenance. Besides high functional and operating safety, other important criteria for the construction and operation of gas tanks include the economic aspects of investment and maintenance costs. DVGW approval held High functional and operating safety Highly accurate radar measurement enables exact content to be displayed Low investment and maintenance costs Quick construction Low maintenance Long service life Leak tightness can be checked

What you can expect with an APROVIS FriCon: - FriCon systems are ready for connection - The FriCon removes the moisture from the process gas by dropping below the dew point temperature - FriCon gas heat exchangers operate at elevated pressure, ambient pressure and negative pressure - Condensate formation in downstream gas lines is avoided - Suspended matter is separated - The FriCon is available in different sizes and designs

BIOGAS FOR INDUSTRY, MUNICIPALITIES AND AGRICULTURE In addition to tank construction, LIPP built the first biogas plant in Germany in the 70’s. Furthermore, LIPP was one of the first companies to develop and sell small biogas plants in the early 80’s. By steady advancements in production technology and the materials used, as well as extensive experience in process engineering LIPP has installed in collaboration with its partners, hundreds of biogas plants in Germany and worldwide. The majority of these projects are still in operation and ensure proof of the high quality and the technical and economic performance of Lipp’s system solutions. LIPP provide system solutions for biogas production in the following areas APPLICATIONS anaerobic wastewater treatment plants waste fermentation plants sewage sludge digestion agricultural biogas plants

What you can expect with an APROVIS ActiCo: - Careful gas purification - Reduction of emissions - Damage prevention - Higher operational reliability - An improved combustion process - An extended activated carbon service life

* FriCon - gas dehumidification * Gas heaters * ActiCo - activated carbon filters * Gas compressors * Process gas heat exchangers

What you can expect from an APROVIS process gas heat exchanger: - Suitable for low and high temperature ranges - Operating pressures up to 160 bar - Compact design for use in confined spaces - Suitable for a wide range of gases - Implementation of customised solutions

Biological exhaust air cleaning is used whenever exhaust air has to be cleaned from volatile organic compounds (VOCs) and odours. Biofilters play a major role in this process. The polluted exhaust air is passed through a filter medium where the VOCs and odours are separated. Normally, this medium is an organic carrier material where microorganisms are grown on. They convert the VOCs and odours into noncritical components by means of their metabolism. Especially regarding the removal of odorous substances, biofilters are a very efficient and comparatively inexpensive way of biofiltration with an efficiency of up to 99 %. BIOCATbiofilters have a high degree of efficiency in a wide range of applications, even for exhaust air components that are difficult to dissolve in water.

BlueVCount measures gas volumes in reactions of all kind. It is applicable for fermentations, degradation studies, substrate comparison studies, wastewater treatment, bioethanol or hydrogen production and is especially helpful in bio methane potential (BMP) determinations in industry and academia. Gas volume measurement delivers important information about the process and helps to optimize yields and process procedures. BlueVCount is a volume measuring unit with a 1 ml cylinder that is equipped with an oil (special) sealed magnetic piston. It counts how often 1 ml gas comes through the cylinder and reports it to the integrated display or via Modbus RTU to a software (e.g. BlueVIS). A minimum flow is not necessary.

Types of interaction in the working chamber of AVS 1. Mechanical intensive dispersion of particle components with mixing of ferromagnetic particles due to the chaotic collision. 2. Destructive flows as a result of the action of the electromagnetic lens of the inductor. 3. Hydrodynamic action - expressed in high shear stresses pressure and changes in flow rate. 4. Hydroacoustic in liquid fluid. 5. Micro arcs and electromagnetic field 6. Electrolysis and ionization of water with the release of hydrogen and OH hydroxyl groups, as well as thermal effects. The devices can be effectively used in such industries as: construction - for grinding and mixing building mixtures, activating the surface layer of materials; chemical - for obtaining solutions, melts, emulsions and suspensions; agricultural - for mixing and receiving fertilizers; mining - for processing ore or sludge; machine-building - for obtaining lubricants; food - for juices, pectins, or pastes.

SEDEF GMBH Pellet is a WOOD PRODUCTS. Our product line is certified, environmentally friendly, and derived from sustainable sources. Find out our products offer: WOODEN PELLETS - Enplus A1 wood pellets, premium wood pellets, and Wood pellet boilers industries. CHARCOAL - Australian hardwood medium to hard density charcoal. Low on smoke and subtle on taste. FIREWOOD - The best Birch, Oak, Ash, and Hornbeam Kiln Dried Logs with a guaranteed moisture content of less than 18%. Our logs are suitable for Wood Burning Stoves and Open Fires, and because they are Kiln Dried, they have high energy and heat values, allowing you to stay warm while enjoying the atmosphere of a log fire! PALLETS - In different sizes and materials for general warehousing and distribution purposes. SEDEF GMBH Pellet is committed to offering only the best value for money and delivering the highest quality wood pellets, charcoal, firewood, and pallet within five days!

What is Anaerobic Digestion? Anaerobic Digestion is a natural biological process that can be used to generate renewable energy and manage waste. The process takes place in an oxygen-free digester, where micro-organisms convert organic material such as food waste, slurries and crop residues into: Biogas Biogas is a mixture of biomethane gas and carbon dioxide. The biogas can be used directly in CHP engines to produce renewable heat and power, or it can be burned to produce heat only. Alternatively, biomethane can be produced by removing the carbon dioxide from the biogas. The biomethane has many valuable uses. It can be injected into the gas grid as a renewable replacement for natural gas or it can be used as vehicle fuel. Digestate The by-product from the AD process is called ‘digestate’. It is rich in valuable plant nutrients such as nitrogen and potassium, and can be used as a renewable fertiliser/soil conditioner.

Wood type Material: 100% Pine Wood, oak or maple Wood Species - Bamboo Woods also available. Quality standard: Wood pellets A1 Color: Light yellow, yellow Diameter: 6mm and 8mm Length: 3-40 mm Moisture: ≤6% Ash: <0.5% Heating capacity: 5.1 kWh / kg (4400 kcal / kg or 18.5 MJ / kg) Volatiles: 80-85% Sulfur content: ≤0.03% Bulk density: 650 kg / m³ 100% natural environmentally friendly raw materials: 100% Pine Wood, oak or maple Wood Species - Premium Quality guaranteed!!! Our Wood Pellets are premium quality ENPlus A1 certified BSL authorised 6mm wood pellet. Manufactured from FSC® certified wood, Firepower Wood Pellets have a particularly high calorific value as analysed, and a pleasing light colour - great quanlity that won't let you down.