Results for
PILANA METAL S.R.O.
Czech Rep.
Bimetal band saw blade with extra wear resistance Application: cutting steels with tensile strength up to 1700 MPa high alloy steel and stainless steel titanium alloys and nickel hard machined materials Characteristics.
Request for a quotePILANA METAL S.R.O.
Czech Rep.
Bimetal band saw blade for cutting of middle and large sized solid rods Application for cutting common steels with tensile strength up to 1400 N/m² suitable also for non-ferrous metals excellent for cutting solid rods and blocks .
Request for a quoteAVOLA MASCHINENFABRIK A. VOLKENBORN GMBH & CO. KG
Germany
Standard equipmentwith tilting alu sliding table 1000x800 mm Cutting height 424 mm Cutting length 700 mm Roller diameter 500 mm Saw band length 3720 mm a) for three-phase current 400 V, 50 Hz, motor power 1,3 KW b) or alternating 230 V, 50 Hz, motor power 1,3 KW only saw band, to be selected according to the type of stone material with jack rings and 2 rollers Sound emission Lpa according to DIN 45635, part 1651 on gas concrete and lightweight refractory bricks ...75 dB(A) on Poroton ...................................... 88 dB(A) Size LxWxH: 1000x1000x1800 mm Weight: 130 kg
Request for a quoteDISPA MACHINE
Turkey
Double Column Bandsaws with linear guideways are ideal for MITRE cuts with different quantities. With the movement of the bow, it’s possible to cut between 90° and +45°. With height adjustment and hydraulic cutting, control allows the bow to go up over the material after the cut. All this process is controlled by a digital counter on the control panel and total duration for one cut decreases. Fixing the bow at any angle is controlled by the hydraulic brake system.
Request for a quoteADAÇAM MACHINE AND BAND SAW FACTORY
Turkey
A BAND SAW MADE FROM A HIGH QUALITY OF GERMANIAN STEEL C75 S
DISPA MACHINE
Turkey
• Semi-automatic double miter for cutting profiles and solid material in steel and non-ferrous material and an excellent price-performance ratio • Manually swiveling saw frame with hydraulic clamping for optimal • Hydraulic clamping of the horizontal vise • Automatic saw frame raising on the cut end • Double speed motor 1.0/1.3 KW Gearbox • Sensitive cutting pressure regulation function of the material properties • Hydraulic-mechanical belt tension • Tape guide with hard metal pads sheets and rolls • Thermal overload protection and no-volt release • Automatic shut-off after cut end • Automatic belt break protection Driven
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • Steel beams, profiles and tubes • Mixed cross-sections
Request for a quoteARNTZ GMBH + CO. KG
Germany
The universal band saw blade for all construction and insulation materials of small and large dimensions running on brick band saw machines. The new variable tooth pitch ensures notably low-vibration and quiet sawing processes and assures supreme quietness. The results are clean and smooth cuts of the best quality. Thanks to its long blade life and increased durability, our further developed, precision-ground tooth geometry is particularly convincing in hard building materials: • particularly low vibration and quiet • long blade life in especially precise and smooth cuts The specialist for: • Pore or lightweight concrete • Perforated brick • Porous bricks ("Poroton") • Insulation material
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • Stainless steel • Heat resistant steels • Cold and hot working steels • Hardened steel up to 1900 N/mm2 • Nickel based alloys • Aluminium-silicon alloys • Copper-nickel alloys • Titanium and titanium alloys • Exotic, hard to cut alloys
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • Induction hardened piston rods • Steels hardened up to 62 HRC • Hard chromium plated materials • Manganiferrous alloyed steels
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • Aluminium alloys • Aluminium bronzes • Copper alloys • Sand cast aluminium and cast magnesium • Graphite
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • Titanium alloys • Metals with high residual stress • Stainless steels • Special alloys • Abrasive non-ferrous metals and graphite
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • Steels of the highest tensile strength • Long chipping materials • Stainless steel • Titanium based alloys • Nickel based alloys • Special bronzes
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • hard and tough materials up to 1700 N/mm2 tensile strength • Stainless steel • heat resistant duplex steel • nickel based alloys • aluminium alloys • titanium bades alloys
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • All-purpose use for construction steel, low-alloy steel, cast iron, aluminium, copper and bronze • Solid material in medium and large dimensions
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • Stainless steel • All-purpose use for steels and non-ferrous metals • Tensile strengths of up to 1400 N/mm2 • Thick walled structurals
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • Pure aluminium and aluminium alloys • Solid material and structurals
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ARNTZ GMBH + CO. KG
Germany
Engineered for : • Large cross-section steel beams • Structurals with residual stress
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • Pure aluminium and aluminium alloys • Solid material and structurals • Materials with residual stress and a tendency to become pinched
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • Common steel qualities and non ferrous metals • Short-chipping materials • Small structurals with thin walls • Narrow cross sections up to approx. 100 mm (4”) • Contour cutting operations
Request for a quoteARNTZ GMBH + CO. KG
Germany
For sawing processes using minimal lubrication. Powerful at high cutting speeds and feeds. Engineered for : • Steel beams, profiles and tubes • Mixed cross-sections
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • Production band saw machines • All-purpose use for steels and non-ferrous metals • Tensile strengths of up to 1400 N/mm2 • Thick walled structurals
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • Structurals with light or medium walls • Short chipping materials • Sheet metal on vertical band saw machines
Request for a quoteResults for
Bimetal saw bands - Import exportNumber of results
24 ProductsCountries
Company type