Bearings drives - Import export

Bearing assemblies with direct drive are suitable for applications where high performance and low space requirements are important criteria. The integration of the drive into the bearing housing means that wear-prone assemblies for transmitting drive power, such as toothed belts, shafts or chains, can be dispensed with. This reduces the required drive energy and also benefits more accurate positioning.

Depending on the central control, it takes action by being set up with chain gear and ensures the transportation of the falling product. The body is made of steel. It has idler drive bearing system. It has been designed with a special tensioning device. It varies according to the desired capacities. Carrier plates are made of hardened steel. It is used wherever horizontal transportation is possible. It is used in feed, food, chemical, mining, sawdust and soil industries. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories

"Slip ring motors are often used in applications where the maximum transient torque must be greater than a conventional cage induction motor, such as quarries. SLIP RING MOTORS (OUR CODE: MB) - Three-phase wound rotor motors - Standard cast iron housing - Stored in IP55 protection and on request in IP23 - Stored in 230/400V from 22kW to 315kW , 400/690V to 560kW - Operating in 50/60hz - Other special voltages or insulation class H on request - Form B3-B5-V1- B35-V15 - Stored in S1 service or S3 service (6 starts per hour) - On request, we can supply motors for lifting applications with 1 or 2 cylindrical or conical axes - Standard motors equipped with PTC sensors - Equipped with roller bearings for belt drive - Electrolytic starters are stocked to start these motors"

The series of RT2A distinguishes by compact design with integrated precision roller bearing and worm drive. The rotary tables are sealed, IP 50 and can be driven in all fitted positions. For the mounting, standard drilling plans and special mounting flange and clamps can be used. Different limit switches are available: Standard: reference impulse, PNP-NC, 2 channel.

The B80 KGK G3 series is a powerful and robust submersible centrifugal pump with plain bearings, drive lantern mounted on anti-friction bearings and IEC standard motor. The B80 KGK G3 series is designed in single or two-stage versions with one or two impellers for high flow rates. Multistage pumps are used to increase the delivery pressure while maintaining compact hydraulic dimensions and are used in particular in processes with high delivery pressures at low flow rates. They are perfectly designed for industrial use in closed unpressurized tanks, basins or pits. * suitable for flow rates up to 270 m³/h * equipped with a suction strainer as standard * a suction pipe extension up to 2000 mm is possible * available in immersion depths from 500 - 4000 mm Features & Advantages * vibration and oscillation free operation * Efficient and space-saving design due to 1- and 2-stage pump hydraulics * Long operational reliability

Optigrun Drainage Gutters and Terrace Grids are used for draining surface water from roof outlets, draining water-bearing layers, draining driving rain from the facade, as collection channels for draining green roof areas and as branch canals between downpipes and roof outlets.

The B80 KGK G1 series (with closed impeller) is a powerful and robust centrifugal submersible pump with plain bearings, drive lantern on roller bearings and IEC standard motor. The pumped liquid is conveyed from the tank via the radial pump outlet and the vertical riser pipe. Power is transmitted from the motor to the pump by means of a torsionally flexible, positive-locking coupling and is designed for continuous operation. * Suitable for flow rates up to 30 m³/h * equipped with a suction strainer as standard * suction pipe extension up to 2000 mm is possible * available in immersion depths from 500 - 4000 mm Features & advantages * No screws in contact with the medium * Vibration and oscillation-free operation * Long service life and operational reliability * Lifetime grease-lubricated roller bearings * Independent bearings for motor and pump * External flushing to protect the plain bearings with media containing solids

The B80 KGK G2 series (with open impeller) is a powerful and robust centrifugal submersible pump with plain bearings, drive lantern with roller bearings and IEC standard motor. The pumped liquid is conveyed from the tank via the radial pump outlet and the vertical riser pipe. Power is transmitted from the motor to the pump by means of a torsionally flexible, positive-locking coupling and is designed for continuous operation. *Suitable for flow rates up to 80 m³/h * equipped with a suction strainer as standard * suction pipe extension up to 2000 mm is possible * available in immersion depths from 500 - 4000 mm Features & advantages * No screws in contact with the medium * Vibration and oscillation-free operation * Long service life and operational reliability * Lifetime grease-lubricated roller bearings * Independent bearings for motor and pump * External flushing to protect the plain bearings with media containing solids

Grease lubrication of rolling and friction bearings, joints, linear drives and chains Lubrication of fittings, seals, moulded parts and elements of elastic rubber materials in the hot- and cold-water segment Lubrication of fittings or machines in dairies, breweries, bakeries, slaughterhouses, etc. Advantages and benefits NSF H1 registered Reduces wear Excellent resistance to oxidation and ageing Resistant to hot and cold water, water vapour, watery-alkaline and acidic disinfectants and cleaning agents

Suitable for neutral and aggressive liquids as well as liquids containing solids Application: Centrifugal pump for dry-well installation featuring a bearing-less cantilever design with direct-coupled IEC motor. Specially designed for plant engineering and confined spaces. The B80 HME Series can be operated beside the container in a dry-well installation. Liquid flowing up inside the shaft guide tube returns to the container via an overflow line. Pumps in dry-well installations allow an easier access to carry out maintenance and repair work. Features: Directly-coupled in bearing-less cantilever design Radial and axial fixed drive elements in two-piece bearing shell Pump housing in glass-fibre or carbon-fibre reinforced plastic (PP or PVDF) Gas seal for protecting the motor bearing Plastic-coated drive shaft Driven by IEC standardised motors Benefits: Compact dimensions Service-friendly dry-well installation Self-centring alignment in the bearing shell Vibration-free and...

Safe upending (90°) and rotating (180°) of coils Body design in solid welding construction with reinforced base with no pit or floor anchoring needed Body made of strong steel plates Base with large integrated floor plate and attached box construction to protect drive components Tilting unit with neatly welded half shell attachments and two reinforced coil tables welded at 90 degrees to provide safe material seating Bedding via four pressureresistant and fully enclosed bearings with lifetime lubrication Tilting shaft of highquality ductile steel with fully enclosed bearings Tilting drive via threephase motor and triplex type highstrength chain Rotating drive via welded surfacehardened sprocket, integrated in base Tilting function via initiator with arbitrary adjustable tilting point Electrical conrol in switch box with leftright selector switches and estop

Safe upending of coils (90°) Body design in solid welding construction with reinforced base with no pit or floor anchoring needed Body made of strong steel plates Base with large integrated floor plate and attached box construction to protect drive components Tilting unit with neatly welded half shell attachments and two reinforced coil tables welded at 90 degrees to provide safe material seating Bedding via four pressureresistant and fully enclosed bearings with lifetime lubrication Tilting shaft of highquality ductile steel with fully enclosed bearings Tilting drive via threephase motor and triplex type Highstrength chain Tilting function via initiator with arbitrary adjustable tilting point Electrical conrol in switch box with leftright selector switches and estop

Lubrication of rolling and friction bearings, joints, linear drives, guides For the lubrication of fittings, seals, moulded parts and elements of elastic rubber materials in the hot- and cold-water segment Advantages and benefits NSF H1 registered Can be used universally due to good high-temperature properties, long-term lubricating effect and good adhesive strength on metal surfaces Resistant to hot and cold water, water vapour, watery-alkaline and acidic disinfectants and cleaning agents High resistance to oxidation and ageing

Manufactured in all sizes up to 6.5 metres long & 3 metres in diameter. All types of fill materials are available to suit the relevant application. Shafts, bearings and drives are also manufactured to suit the relevant equipment.

GRK - Geared agitator with helical bevel geared drive The GRK series geared agitator equipped with a helical bevel geared drive with reinforced bearing can be used for a wide range of applications due to its low installation height. This ow installation height can be achieved thanks to the horizontal position of the drive. The agitator shaft of the GRK series is directly mounted in the hollow shaft of the gear and, upon request, this agitator shaft can be divided by flanged coupling. After assembly of the mixer, the agitator shafts are balanced for concentric run. The GRK series features shaft lengths of up to 6,000 mm and drive ratings of up to 75.0 kW. It has a standard output speed of 1 to 250 rpm. According to the specific mixing task, the GRK series can be supplied with matching mixing elements and various seals. Upon request, we supply the GRK series with frequency controlled drives that have drive ratings of up to 7.5 kW. Type test certificate for explosive zone 0.

Aldea BLT 8-3 DN40 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 8-14 DN40 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-19 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-16 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-12 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 2-18 DN25 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT series vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT series vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

The GRK series geared agitator equipped with a helical bevel geared drive with reinforced bearing can be used for a wide range of applications due to its low installation height. This ow installation height can be achieved thanks to the horizontal position of the drive. The agitator shaft of the GRK series is directly mounted in the hollow shaft of the gear and, upon request, this agitator shaft can be divided by flanged coupling. After assembly of the mixer, the agitator shafts are balanced for concentric run. The GRK series features shaft lengths of up to 6,000 mm and drive ratings of up to 75.0 kW. It has a standard output speed of 1 to 250 rpm. According to the specific mixing task, the GRK series can be supplied with matching mixing elements and various seals. Upon request, we supply the GRK series with frequency controlled drives that have drive ratings of up to 7.5 kW. Type test certificate for explosive zone 0.

Precise CNC machining is currently the basis for the implementation of many production processes. Thanks to it, it is possible to manufacture details that are very complex in shape, such as gears, bearing elements, drive shafts, specialized tools or screws with non-standard parameters. It is used both in serial production and where prototypes are created and individual elements must be made based on technical drawings. It is also irreplaceable in the production of progressive tools . Precise CNC machining with the use of numerically controlled CNC machines also guarantees a very high repeatability of the elements made. At the same time, it reduces the time of their production and contributes to the economic use of materials, and as a result - to lower production costs. Such effects are determined both by the preservation of the set parameters throughout the production period of the series and the elimination of human errors. Precise CNC machining is also one

Pre-Loaded Packing Ring in Metal Casing Characteristics WDR-rings are ready-to-fit sealing elements for shafts and axles The wide sealing surface offers extra protection against early wear on the shaft and as well on the seal WDR rings are located in the housing with interference fit. The sealing effect is facilitated through the pre-loaded encapsulated packing. Different packing styles can be utilized depending on application Housing Standard: St 1403 galvanized Special: e.g. VA (1.4301) - CrNi Standard Insert P1P Budget to +200 °C Main application Crank and drive shafts Guiding shafts Axles, spindles and similar equipment Sealing against fluid leakage and dust penetration Protection for bearings and drive units Suitable for All Industries to seal against fluid loss or protect against dust and dirt ingress. Variant Special variantes: A 22 up to +450 °C for high temperature application S 7/G up to +250 °C for applications in abrasive environment etc. The packing insert...

Unique and light as a dragonfly – this is how the Motion06 Inclined Transport Unit works – quickly and safely overcoming any height difference. The inclined conveyor transports flight baggage directly to the passenger boarding bridge, meaning it can be used in direct proximity to the aircraft. Baggage or similar general cargo is either safely lifted onto the aircraft or lowered onto the apron. Staff must no longer carry the baggage up and down the sometimes wet or icy stairs in any weather. No Maintenance Maintenancefree lifting system thanks to lifetime lubricated bearings and optional toothbelt drive. Quick Installation Swift assembly due to a simple modular system, perfectly optimised for transportation. Efficient Energyefficient and economic design. UltraSimple Adjustment Ultrasimple adjustment to required installation conditions.

With a capacity of up to 2500 pieces of baggage per hour, strength and resilience are fundamental. The Motion06 Vertical Sorting Unit Belt Conveyor is used for the distribution and merging of baggage and general cargo between two or three levels. The belt conveyor incorporated into the Vertical Sorting Unit is height adjusting using a top of the line lifting system with two steelreinforced tooth belts. This maintenancefree lifting system has been tried and tested for decades. It is also possible to use it in flight baggage systems with a container system. The belt conveyor is replaced by an appropriate conveyor element for this purpose. Any Height Requirements Ultrasimple adjustment for the required input and output positions. No Maintenance Maintenancefree lifting system thanks to lifetime lubricated bearings and optional toothbelt drive.

The Double Stream Mill, series PSKM is used for the fine preparation of precut wood chips and annual plants such as bagasse, miscantus, cotton stalks, hemp stalks, corn straw and rice straw. The fine flakes produced are characterized by their low percentage of dust and coarse particles. The areas in which the end material is used are diverse. It is used for energy generation, as insulation material, the reinforcement of building components and as raw material for the production of fine surface layers of particle boards. Characteristics, Function Compact and sturdy, designed for continuous operation Bearing- and drive system easily exchangeable as a complete unit A slide to remove the grinding ring is supplied as standard. Dismantling of the impeller is not necessary Material feeding via vibratory feeder and a feed chute designed as a gravity separator Even distribution of the material in the grinding chamber Size reduction is performed by repeated impact onto the impeller...