Basin washing - Import export

WASH BASIN + PEDESTAL

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electrostainless steel body in the alkaline structure at a concentration of 2-5% in the device washing tank chemical water, each point of the dirty part is specially around contacted by nozzles. While the washing group used rotates around itself with a powerful motor, the washing effect is sprayed on 3 different planes, from bottom to top and from the side with increase.

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electrostainless steel body in the alkaline structure at a concentration of 2-5% in the device washing tank . chemical water, each point of the dirty part is specially around contacted by nozzles. While the washing group used rotates around itself with a powerful motor, the washing effect is sprayed on 3 different planes, from bottom to top and from the side with increase.

At Auromak Makine, with the knowledge and experience we have acquired since 2010, we continue to manufacture industrial cleaning machines and industrial parts washing machines that are aesthetic, high-quality, and practical for both retail and wholesale needs. We take pride in bringing innovation to the industry and adding value to our customers.

Recessed wash basin white with decal

The modern mixer tap is uniformly integrated into the caravan interior - so everything stays in place even when en route.

Prefabex is the Turkey's leading manufacturer of very high-quality flat pack container houses for construction site housing, oil field housing, mancamp housing and other areas that require safe living units. Prefabex flat pack container houses are offered with a wide range of plans that can include WC/shower, kitchen cabinet, washing basin, one room or two rooms.

he cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agent from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.

The cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agents from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.

Article 216 Wash – Professional portable washbasin for hairdressers made of durable scratch-resistant plastic material Height-adjustable chromed metal stand with 4-race modular base Basin with fixed inclination Accessories Hand shower – 2mt Waste pipe with support – 10l Tank – Carrying bag Versions and Colors The basin is available in Black 216 Wash – 4-race plastic base and non-slip feet 216 Wash Tsc – 4-race plastic base with non-slip feet and 2mt Waste pipe with support 216 Wash Tsc Dc – 4-race plastic base non-slip feet 2mt Waste pipe with support and Hand Shower 216 Wash Tsc Sb – 4-race plastic base non-slip feet Waste pipe and Tank 216 Wash Tsc Dc Sb – 4-race plastic base non-slip feet Waste pipe Hand Shower and Tank Bases It can be equipped with a 3-race plastic base / a modular 4-race plastic base / a 5-race plastic base Dimensions Basin 38 x 52 X 16 cm – Base 57 cm in diameter – Adjustable height from 76 to 111 cm

Water-sprinkled spray walls and spray booths with automatic paint sludge filtration system In wet separation, the overspray meets the water film of the spray wall and is thereby bound in the water. The sludge formed by this is discharged using sludge filtration systems. Water-sprinkled spray walls The overspray is sucked in in the lower area of the vertical water drain surface and is bound in water when it meets the film of water. The paint mist is washed out further in the lower section of the washout tower using a vortex washing system with downstream baffle plate separator. In order to replace the water lost due to evaporation, it is recommended to fit an automatic water level controller. The entire quantity of water is fed to the automatic paint sludge filtration system via the disposal pump. A coagulant is added to the water by an automatic dosing unit, as a result of which the paint sludge in the circulating water is disbonded and can be separated more easily. The cleaning of the circulating water takes place in the separately arranged paint sludge filtration system. Depending on the paint system and plant version, the separation system is operated using a full or partial current method. Water-sprinkled spray walls/booths with underfloor paint mist extraction For the painting of large parts with a high paint throughput. The paint mist is sucked in under the grating cover. A substantial part of the overspray is already bound in the water by the constant sprinkling of the entire floor of the basin. The paint mist is washed out further in the lower section of the washout tower using a vortex washing system with downstream baffle plate separator. Optimum capture of the paint mist is guaranteed by the laminar air flow inside the booth. A further advantage over comparable systems is the low water basin height and the associated low foundation depth. The sludge formed by this is discharged using sludge filtration systems. Advantages

Wash basin mounting for dry-wall construction, for loads of up to 150 kg, with markings for 180 mm and 280 mm axial distance

Pre-configured foam insulated installation box 25-WL-WT-T for wash basins, for use in dry wall constructions. The box provides thermal insulation and condensate protection through its foam body. With two female threads Rp 1/2 and two MultiFit®-Flex (multilayer pipe) system pipe connections 16 mm as well as drainage connection 50 mm. Overall dimension: 200 x 350 / 40 x 70 mm (Length x width w/o plate/width with plate x depth).

Fully preconfigured SANHA installation box for dry-wall construction, with two wash basin connections. With sound insulation and condensate protection. One female threads Rp 1/2", one multilayer pipe connections 16 mm. 270 x 350 x 70 mm (length x width w/o plate/width with plate x depth).

The entire SANHA-Box range for drinking water installations is made exclusively from silicon bronze CuSi lead-free system press fittings which emit no harmful lead into the drinking water – not only do you save substantial time and installation costs, you also gain the knowledge that your installation reliably meets the stringent drinking water regulation specifications! The practical SANHA-Box range comes in many versions: Preconfigured boxes are available for wash basins and sinks, through baths and showers, and onto water meter connections. All SANHA-Boxes are also available with already isolated multilayer plastic pipes. A complete overview of our product portfolio and the complete range of accessories can be found in our brochure – or simply call us at +44 1628 819245!

The entire SANHA-Box range for drinking water installations is made exclusively from silicon bronze CuSi lead-free system press fittings which emit no harmful lead into the drinking water – not only do you save substantial time and installation costs, you also gain the knowledge that your installation reliably meets the stringent drinking water regulation specifications! The practical SANHA-Box range comes in many versions: Preconfigured boxes are available for wash basins and sinks, through baths and showers, and onto water meter connections. All SANHA-Boxes are also available with already isolated multilayer plastic pipes. A complete overview of our product portfolio and the complete range of accessories can be found in our brochure – or simply call us at +44 1628 819245!

Dimensions: Width: 65, 80, 100, 120 cm - Height : 190 cm - Wash Basin : Ceramic - Colour : Free - Body :Membran - Door :Membran -

Marble sinks made of natural stone. It is completely handmade. Its dimensions are 10cm*45cm*50cm and it weighs 30 kg. It is not ceramic, concrete or veneer. MADE OF 100% MARBLE Suitable for restaurant, home, bathroom, kitchen, etc. It is suitable for use in places. It is suitable for countertop use. Discounts are given for bulk orders if contacted. For other products, request a catalogue. Cleaning Conditions; It is not suitable for cleaning with bleach, lime remover, lemon and acidic substances. It is convenient to clean with a damp cloth and soap.