Antennas - Import export

Antenna is the interface between subscribers and network. lt is often seen as the last point of contact of a RF network with subscribers. lndoor antenna requires not only electrical performance that guarantees a good connection and signal transmit and receive with subscriber devices but also maintain a low visual impact to general public. Both 1-port version (SISO operation) and 2-port version (MIMO operation) are available for selection. Some of indoor antennas have extended frequency up to 3.8GHz for future proof of 5G operation.

THESE MASTS ARE NOT TELESCOPIC - INSTEAD THEY USE A UNIQUE ROLLABLE COMPOSITE. TRIED AND TESTED BY THE MILITARY FOR 20+ YEARS, NOW AVAILABLE TO NON-MILITARY CUSTOMERS. THE BI-STABLE ROLLABLE COMPOSITE ENABLES THEM TO BE ROLLED UP TO THE SMALLEST PACK SIZES FOR TRANSIT, AS WELL AS MAKING THEM LIGHTWEIGHT AND VERY QUICK & EASY TO DEPLOY AND RECOVER. System IAM takes these benefits one step further by integrating the antenna into the masts, thereby providing a unique plug & play communications solution, Available in 136-175MHz, 30-300MHz and 136-470MHz.

Optimised for the Cambium Wireless Access Point, with a hole pattern for side mounting additional equipment. System 75 double tube mast systems

Optimised for the Cisco Wireless Access Point, with a hole pattern for side mounting additional equipment. System 75 double tube mast systems

For use on any Rolatube mast system to provide a 1.01m (40”) span for securing multiple antenna. System 50 masts System 75 masts System 100 masts

Optimised for the Radwin Microwave Antenna, with a hole pattern for side mounting additional equipment. System 75 double tube mast systems

THESE MASTS ARE NOT TELESCOPIC - INSTEAD THEY USE A UNIQUE ROLLABLE COMPOSITE. TRIED AND TESTED BY THE MILITARY FOR 20+ YEARS, NOW AVAILABLE TO NON-MILITARY CUSTOMERS. THE BI-STABLE ROLLABLE COMPOSITE ENABLES THEM TO BE ROLLED UP TO THE SMALLEST PACK SIZES FOR TRANSIT, AS WELL AS MAKING THEM LIGHTWEIGHT AND VERY QUICK & EASY TO DEPLOY AND RECOVER. System IAM takes these benefits one step further by integrating the antenna into the masts, thereby providing a unique plug & play communications solution. 7m available in 136-175MHz and 30-88MHz &/or 225-512MHz (UHF, VHF or dual band)

Women's woolen beret will give a lot of charm to autumn styling.

Plug and Play Wireless Microphone with Charging Case Dual Microphone Clip On Mic for Phone/Laptop/Tablets

Slipring transmitter are required for all rotating systems. We are able to construct and adapt them according to your requirements and of course combined with our rotary unions. So control-, working-, signal- and measuring currents are transfered from the static to the rotating unit. Our range of services: temperature range: up to 200°C, furthermore with internal cooling maximum diameter: 1600 mm current rating: up to 20.000 ampere signal transmission possible options: EX-proof, water- and gasproof, chemistry- and food resistant, special solutions

Smart embroidery is one of the most well-known technologies to add functions to and integrate them in textiles. Thus, we produce intelligent textiles with our special CNC wire laying technology. Potential applications include: > textile-based electrodes > flexible antennas > textile sensors > medical devices reliant on electromagnetic coils

A complete portfolio includes all available connector types: N, DIN and 4.3-10 combines with various power rating and PIM values, power splitters by bda connectivity offer solutions to different scenarios and include extended frequency range up to 3.8GHz for future 5G application.

With wide range of coupling value starting from 5dB to 40dB, bda connectivity directional couplers offer the highest network distribution flexibility. In addition, its low loss low PIM and high isolation combine with various connector configurations and power ratings allow network operators the best selection for network design. Operating frequency is extended to 3.8GHz in some series for future network upgrade.

With a fixed coupling value of 3dB, bda connectivity hybrid couplers offer the highest network distribution flexibility. In addition, its low loss and PIM and high isolation combine with various connector configurations and power ratings allow network operators the best selection for network design. Operating frequency is extended to 3.8GHz in some series for future network upgrade.

Cable assembly by bda connectivity is designed for high performance and long service life. Extremely low PIM guarantees network performance while the rigidness of cable structure ensure for installation in toughest environment and workmanship. Various cable types and connectors are available for customer project demands. Cable types are including RF coaxial cable, leaky cable, optical cable, etc, while connectors are including N, 7/16, 4.3-10, TNC, etc. Please contact your nearest sales representatives for more details cable assembly services.

Radome antennae TC is working with the customer to develop suitable solutions for antenna systems. This ranges from small batches all the way up to largescale production, naturally including the necessary mounting and connecting parts such as cover components with cable bushing, brackets for mobile phone masts, etc. The parts are processed on our highprecision 5axis CNC machinery.

The kiro multi sensor node measures temperature, humidity, air pressure and brightness. The measured values are transferred to a cloud. This version provides an SMA antenna connector as well as an M8 connector for PT1000.

THESE MASTS ARE NOT TELESCOPIC - INSTEAD THEY USE A UNIQUE ROLLABLE COMPOSITE. TRIED AND TESTED BY THE MILITARY FOR 20+ YEARS, NOW AVAILABLE TO NON-MILITARY CUSTOMERS. THE BI-STABLE ROLLABLE COMPOSITE ENABLES THEM TO BE ROLLED UP TO THE SMALLEST PACK SIZES FOR TRANSIT, AS WELL AS MAKING THEM LIGHTWEIGHT AND VERY QUICK & EASY TO DEPLOY AND RECOVER. The System 100 masts offer unrivalled portability, being compact and lightweight with exceptionally fast deployment times, yet can take top loads up to 15kg. The ideal portable solution for mounting lighting or antenna when time, space and weight matter.

THESE MASTS ARE NOT TELESCOPIC OR SECTINAL. INSTEAD THEY USE A UNIQUE ROLLABLE COMPOSITE. TRIED AND TESTED BY THE MILITARY FOR 20+ YEARS, NOW AVAILABLE TO NON-MILITARY CUSTOMERS. THE BI-STABLE ROLLABLE COMPOSITE ENABLES THEM TO BE ROLLED UP TO THE SMALLEST PACK SIZES FOR TRANSIT, AS WELL AS MAKING THEM LIGHTWEIGHT AND VERY QUICK & EASY TO DEPLOY AND RECOVER. The System 75 masts offer unrivalled portability, being compact and lightweight with exceptionally fast deployment times, yet these double tube systems can take top loads up to 23kg. The ideal portable solution for mounting lighting or antenna when time, space and weight matter.

THESE MASTS ARE NOT TELESCOPIC - INSTEAD THEY USE A UNIQUE ROLLABLE COMPOSITE. TRIED AND TESTED BY THE MILITARY FOR 20+ YEARS, NOW AVAILABLE TO NON-MILITARY CUSTOMERS. THE BI-STABLE ROLLABLE COMPOSITE ENABLES THEM TO BE ROLLED UP TO THE SMALLEST PACK SIZES FOR TRANSIT, AS WELL AS MAKING THEM LIGHTWEIGHT AND VERY QUICK & EASY TO DEPLOY AND RECOVER. The System 75 masts offer unrivalled portability, being compact and lightweight with exceptionally fast deployment times, yet can take top loads up to 11kg. The ideal portable solution for mounting lighting or antenna when time, space and weight matter.

THESE MASTS ARE NOT SECTIONAL OR TELESCOPIC. INSTEAD THEY USE A UNIQUE ROLLABLE COMPOSITE. TRIED AND TESTED BY THE MILITARY FOR 20+ YEARS, NOW AVAILABLE TO NON-MILITARY CUSTOMERS. THE BI-STABLE ROLLABLE COMPOSITE ENABLES THEM TO BE ROLLED UP TO THE SMALLEST PACK SIZES FOR TRANSIT, AS WELL AS MAKING THEM LIGHTWEIGHT AND VERY QUICK & EASY TO DEPLOY AND RECOVER. The System 50 masts offer unrivalled portability, being compact and lightweight with exceptionally fast deployment times, yet can take top loads up to 10kg. The ideal portable solution for mounting lighting or antenna when time, space and weight matter.

THIS TRIPOD IS NOT TELESCOPIC - INSTEAD IT USES A UNIQUE ROLLABLE COMPOSITE. TRIED AND TESTED BY THE MILITARY FOR 20+ YEARS, NOW AVAILABLE TO NON-MILITARY CUSTOMERS. The unique composite means these tripods can handle top loads of up to 115kg. Lightweight, portable, strong, your ideal mobile solution.

Axon' has designed a complete range of low loss microwave coaxial assemblies : Axowave, axolab, axospec. They are mainly used as measurement and equipment assemblies as well as for antennas. Our microwave assemblies can be integrated into hybrid harnesses Microwave coaxial assemblies offered by Axon' are FEP or PU insulated coaxial cables terminated with SMA, N or TNC connectors The main applications are as follows: measurement, base transceiver stations test equipment, antenna systems, dynamic applications such as radar Surveillance or navigation systems

Professional oven electronic controls 1800/3000 Watt - 230V / 1/50 ~ 60Hz, 35Liters cooking chamber capacity GN 2/3 - 2 Magnetron - 2 opposing antennas - 5 power levels - Intermediate shelf - 10 programmable keys - 100 Programs - Entirely stainless-steel (AISI 430) - Ergonomic handle in stainless-steel (AISI 304) - Chamber internal light - Timer: 60.00 - Removable filter

The design staff is always attentive to all customer needs, and manages to transform practically every request into a project, which is then entrusted to the modern production department, which is able to offer solutions of the highest quality, such as those illustrated in the photograph in this section. . The Mollificio GR is located in San Giovanni in Persiceto (Bologna) for more information on the Spring Antenna to contact us at 051.824585

Manufacturer of electric motors including brushless DC motors. Used in electric tools, home, automotive, medical, printing, and computer applications. Motors can be customized. voltage 12v 12v 9v 24v rated speed 3500 2800 7700 5000 RPM rated torque 6.38 4.5 9.6 7.22 mNm

Isolated USB to RS485 converter module This USB to RS485 converter is designed for industrial use and it makes a half-duplex RS485 connection. With its metal housing this converter is highly recommended for factory environment, but it is also suitable for any other industrial installations. This converter is powered through the USB plug and no external power supply is required. Using the high performance industry proven Ft232 processor from FTDI, the converter ensures optimum reliability and performance. More about Ft232 processor from FTDI Future Technology Devices International Ltd https://www.ftdichip.com/ Features • Optical isolated • Two-way communication (USB to RS485 / RS485 to USb ) • Input over voltage protection • Short circuit protection • USB 2 compatible • Visual indicator LED for RX -TX • Supply voltage from the USB • FTDI chip • Wall mountable aluminium case • Plug and Play • 2500 V isolation

The WCE2000 sets the standard for high-speed wire embedding and RFID inlay production: Superior quality, highest accuracy and unmatched productivity at an unbeatable price-performance ratio. The system can be designed to perfectly match your needs: sheet to sheet (S2S), reel to sheet (R2S), or reel to reel (R2R). This flexible solution offers the most economical way to produce RFID inlays for ID documents in large quantities. You get unrivalled real-world throughput: up to 4,050 antennas/hour as antenna embedding machine and up to 2,000 finished RFID inlays/hour as inlay manufacturing line. The WCE2000 is available in virtually unlimited configurations. Wire coil embedding, module pick & place, soldering, and testing are the main features that can be integrated to build a tailor-made solution. Punching, sheet cutting, handling and collation of additional layers, and other features complement the system to a complete inlay manufacturing line. The possibility to combine all of...