Results for
JSC SAKCABLE (SAKCABLE)
Georgia
For transmission and distribution of electric power at stationary devices with rated voltage 0,660kV and 1 kV frequency 50Hz. For straining in the air where there is no danger of mechanical damage of the cable, also for laying into channels without influence of stretching forcesThe copper cores with section 1,5-6mm2 inclusive are produced of single wire of 1 class flexibility, 10-240mm2 inclusive with twisted multi-core wires of 2 class flexibility, according to standard IEC 60228:2004. Number of cores in the cable 1,2,3,4,52,5-16mm2-450m; 25-70mm2-300m; 95-240mm2-200min case of supply in bundles the construction length is agreed with the customer. In case of agreement with the customer cables of different construction lengths can be produced
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For supply and distribution electricity to power and lighting networks with variable voltage 0,660 / 1 kV . Used in the main overhead power line and in residential branching.1. The conductor is twisted by aluminum wires and it is compacted. 2. The insulation is thermo and lightproof . It is also resistant to ultraviolet radiation and ozone effect 3. Neutral conductor is twisted with aluminum solid wires or aluminum wire with steel core and uninsulatedagreed during receiving order from the customerMarking of conductor cores with figures 1, 2, 3. On one of the conductor cores an inscription is made: “JSC Sakcable”, cable brand, manufacture year
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
AS: For transmission of electric power in overhead electric networks, used in I and II type atmospheric air provided that the content of sulphur trioxide in the atmosphere is not more than150mg/m2 per day (1.5mg/m3) and in all microclimatic regions of the land according to standard 15150-69. ASKP and ASKS: Used on the seashores, in industrial regions, salty sandy regions, as well as regions adjoining them in II and III type atmospheric air provided that the content of sulphur trioxide in the atmosphere is not more than150mg/m2 per day (1.5mg/m3) and Chlorine salt not more 200 mg/m2 ,in all microclimatic regions of the land according to standard 15150.The conductor is made by twisting of the steel conductor and aluminum wire. Regarding to the structure, the steel core is single-wire or twisted multi-wire. In case of twisting in layers, the twisting is performed in opposite directions.
Request for a quoteWESTFÄLISCHE DRAHTINDUSTRIE GMBH
Germany
Aluminium wire We manufacture hard drawn and annealed aluminium wire at our site in Rothenburg/Saale. Materials / DIN EN E-aluminium according to EN 60889 Aluminium-magnesium-silicon alloys according to EN 50183 Aluminium content min. 99.5 % Aluminium for cold forming parts
Request for a quoteTELMAKSAN
Turkey
Aluminum and aluminum alloy Mono Wire diameters: 0.12mm - 9.5mm (.0047'' - .3800") Aluminum and aluminum alloy Multi Wire diameters: 0.12mm - 0.50mm (.0047'' - .2000'') TELMAKSAN is delivering the best quality of aluminum wires to increase the quality of customers products. Field of application includes coaxial cables, flexible cable, data cables and armor for any kind of cables Applications: COAXIAL CABLES, METALLIZATION, DATA CABLES, ARMOUR FOR CABLES, RIVET AND SCREWS, FOODSTUFF CLIPS
Request for a quoteTELMAKSAN
Turkey
TELMAKSAN specialized in manufacturing aluminum and aluminum alloy wires in both medium and fine diameters. Telmaksan aluminum wire facility is recognized as the Europe's fastest, as well as leading manufacturer of bare aluminum wire and aluminum alloy wire products. Due to our flexible production system even requirements for smaller quantities can be accommodated with a short production lead time. The lightness, flexibility, excellent conductivity and resistance to corrosion make aluminum wire the ideal material for many different uses. Its production is aimed at technological improvement and quality control to achieve best results for its customers’ requirements.
Request for a quoteTELMAKSAN
Turkey
Aluminum and aluminum alloy Mono Wire diameters: 0.12mm - 9.5mm (.0047'' - .3800") Telmaksan, aluminium wires are manufactured according to the EN 573-3 standards. TELMAKSAN is delivering the best quality of aluminum wires to increase the quality of customers products for metalization use.
Request for a quoteANKARA BRONZ
Turkey
Yellow / Aluminum / Copper / Silver Mixed Welding Wires and 10 % - 20 % - 30 % - 40 % Silver Welding Wire TYPES OF WELDING POWDERS Silver Welding Powder Borax ) Aluminum Flux (F-14)
Request for a quoteANKARA BRONZ
Turkey
Bar, Sheet Plate Pipe, Profile, box profile, Angel Ring, Special profiles, Flat aluminum plate, Aluminum tread plate, Aluminum knurled plate, Thin wire coil and hard molding aluminum
Request for a quoteTAIHAN FIBEROPTICS
South Korea
# Description Taihan Fiberoptics offers an extensive selection of metallic fiber optic cables designed to protect overhead transmission lines from lightning strikes and to prevent fault currents (over voltages) and to created a path for communication through its optical fibers. We have a wide range of OPGW cables and we can accommodate specific requirements of various clients and projects in order to provide customized bespoke design to suit customers' needs. # Features - Crush Resistance (Shield Wire) - Electrical Performance (Aluminum Pipe) - Cost Saving (Fast Splicing) # Products - OPGW Steel Tube - OPGW AL Tube - OPGW non-Metal
Request for a quoteSPANSET SECUTEX GMBH
Germany
The SKDS hinged edgeprotector is a massive edge protector for cable grummets. The edgeprotector flexibly adapts to the load, increasing the radius over critical edges and distributing the lifting forces over a larger area. The cable and load are equally protected. It is available in two versions, featuring either a steel or aluminium hinge.
Request for a quoteSPANSET SECUTEX GMBH
Germany
By means of a hinge, the edge protector SKD can be optimally suited to any load geometry. The edge protector can be quickly secured to the edge of the wire cable by means of mounting slits. The wire cable slides through the secutex clip which remains on the lashing belt despite collisions.
Request for a quoteSHENZHEN TENKING TECHNOLOGY CO., LTD.
China
Charge all kinds of smart devices just with 1 cable. Short length avoides kontting. Big logo surface illuminates your brand with LED light.
Request for a quoteSPANSET SECUTEX GMBH
Germany
secutex protection also for wire ropes secutex protective sleeves in combination with Spanset lifting slings are always the best choice for lifting machinery elements and other loads. Because of the design, the lifting slings are wide, the load is distributed over a relatively large area. But sometimes secutex protective sleeves are also required for wire ropes. The wire ropes have an almost round diameter, the surface area to the load is rather small and the stress per area is high. In general, the use of wire rope sleeves can only be recommended for the lifting of large, round loads, i.e. without sharp or angular edges. There are slotted and also unslotted secutex wire rope protective sleeves available for one or two strands. The slotted variants can easily be assembled afterwards, the closed types, on the other hand, have to be installed during the manufacture of the wire ropes. Please note that the wire ropes often have a larger diameter than the nominal size
Request for a quoteWILH. KÄMPER GMBH U. CO KG
Germany
Parts are made to custom design from drawings, from very small quantities to industrial mass application, in a wide range. We work with steel, stainless steel, copper and aluminium wire and can also implement your surface requirements.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
aluminum welding wire MIG/MAG (GMAW) Welding | ED701763 General purpose filler alloy for 5XXX and 6XXX series alloys The most widely used soldering alloy High strength filler metal
Request for a quoteTIANJIN ZHONGHUAN ASCEND TECHNOLOGIES CO., LTD.
China
7/8" aluminum feeder cable for mobile communication transmitting system.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For cutting copper and aluminium cable with strong rubber or plastic sheathing • Special cutting geometry and precision cutting for a clean cut without any burrs • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Opening of the blade in each position possible • Optimum leverage, easy handling and minimum effort by ratchet action • Made of special steel, high-strength parts that are especially subject to wear and tear are additionally hardened and tempered
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened
Request for a quoteBDSENSORS GMBH
Germany
The differential pressure transmitter DPT 100 has been especially designed for fast test processes in leakage and flow measurement, where a fast response time and high sampling rate are necessary. The compact design of the DPT 100 facilitates the use in standardised applications, e. g., and the installation in 19“ Rack. The DPT 100 with optionally RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master Slave architecture with which up to 247 Slaves can be questioned by a master – the data will transfer in binary form. Features: — differential pressure from 10 mbar up to 20 bar — static pressure max. 400 bar — accuracy: 0.1 % FSO — output signal 4 ... 20mA / 2-wire — aluminium housing, die casting Optional Features: — output signal RS485 with Modbus RTU protocol — several process connections
Request for a quoteCOLIMET SRL
Italy
Zn/Al wires for metallization, from high grade Zinc 99,995% and Al 99,7%
Request for a quoteCOLIMET SRL
Italy
All wires for metallization
Request for a quoteAXON CABLE SAS
France
Axon' offers 2 ranges of wires and cables for space applications : ESA wires and aluminium wires. They have been specially designed for on-board equipment in space applications including satellite and launcher cabling. They meet the most stringent constraints required by those applications. Axon' has developed a range of aluminium wires, axalu®, which can replace traditional copper allowing substantial weight savings. Axon' ESA wires are approved to ESCC3901 and ESCC3902 standards.
Request for a quoteAXON CABLE SAS
France
As vital components for electrical power distribution in telecommunication satellites and land-based arms systems, the bus bars and battery bus bars developed by Axon’ Cable ensure reliable and constant distribution of power. Advantages mass reduction : aluminium bars (Aluminium 1050A is 3 times lighter than copper) improved heat dissipation : flat shape electrical performance : high conductivity of pure aluminium Construction flexible or rigid mono-layer or multi-layers (several potentials) double electrical insulation between each conductor Ceramic coating for better mechanical resistance Interconnection of bars : ESA wires, aluminium bars or multi braid links Interface connectors : D-Sub connectors, Axon' power connectors with low contact resistance Applications Telecommunication satellites : Our busbars can distribute energy in satellite. Different components of a battery (cells, bypass, shunt, connectors,etc) Solar panels to the voltage regulation unit
Request for a quoteSHAKUNT ENTREPRISES PVT LTD
India
A 99% aluminium solid wire Smooth wire feedability with efficient welding High corrosion resistance High electrical conductivity Radiographic weld quality
Request for a quoteELAP AUTOMAZIONE INDUSTRIALE
Italy
Wire transducers series WDS are composed by the draw-wire mechanics coupled to Elap multiturn absolute high-resolution encoder MEM-BUS or MEM. They can provide different communication protocols – EtherNet/IP, EtherCAT, PROFINET, Profibus, CANopen or SSI output signal. The encoder grants high resolutions values (28 or 29 bit) and strokes ranging from 3000 to 15000 mm. The housing is out of aluminium, whilst the wire consists of coated poliamide stainless steel.
Request for a quoteResults for
Aluminum wire - Import exportNumber of results
81 ProductsCountries
Company type
Category