Results for
Italy
FN fuel tank cap in galvanised steel, with external bayonet coupling passage diameter 31 mm and sealing gasket. It is available hermetic version. FN fuel cap is usually used for fuel tanks in agriculture and building industry. The careful selection of raw materials and the adoption of innovative and rigorous production processes allow us to always guarantee quality and reliability of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and CE regulations.
Request for a quoteChina
The ROPP capper is the automatic capping machine which is designed to tighten pilfer proof cap for wine bottles, olive oil bottles, drinks bottles etc. It is suitable for φ12-55mm bottle caps (Equipment can be customized according to lid diameter). The automatic operation helps you save labor and reduce production error. The capping machine is a suitable equipment for roll-press-sealing the aluminum caps for the plastic bottle, pet bottle, as well as glass bottle. It processes the screw-press capping for the bottle under the rolling press from hobs, automatically feeding bottle, caps, removing the reverse caps. The capped bottle favors the characteristics like the stable capping effect, convenient uncapping, so that it function as conterfeit and anti-theft.
Request for a quoteGreece
The cup falls Feeding station Aluminum placing (preset cap) Waterproofing Dating Carrier’s exit Automatic date placement The cup filling machine has three photocells A photocell to check the filling whether there is any cup or not. Thanks to this photocell system, the machine will not lose the product. If there are no cups, then the machine will not proceed with filling. The photocell control for the aluminum lids, whether there is cup or not, thanks to this system if there is no cup then the machine will not waste the aluminum lids. The photocell control for sealing, thanks to this system it checks whether there are aluminum lids on the cups or not, if there are no lids on the cups then the machine will not reach the sealing unit and the machine stops.. Additional options are possible in the yogurt filling sealing machine Flow filter unit-ΗΕΡΑ Second filling station for filling multiple products Adjustment of placement between cap and cap
Request for a quoteGermany
These are the parts made by aluminum, which was machining by CNC milling machine,there is no surface treatment.
Request for a quoteGermany
These are the parts used in valve accessories series products,which is made by aluminum.
Request for a quoteGermany
Camlock couplings are available in different dimensions for coupling stations. They are suitable for tube diameters from 40.0 / 50.0 / 60.3 and 65.0 mm and have the following characteristics: male parts in aluminium covering caps in aluminium female part with hose connector in aluminium or stainless steel
Request for a quoteGermany
Round floor socket 7704A with screw cap made of aluminum with 4 slots. The floor socket is made of solid, gray PVC and can be used both outdoors and indoors. When closed, it is waterproof. The floor socket is opened and closed with a special key. Further equipment variants on request.
Request for a quoteGermany
Round floor socket 7702A with screw cap made of aluminum with 2 slots. The floor socket is made of solid, gray PVC and can be used both outdoors and indoors. When closed, it is waterproof. The floor socket is opened and closed with a special key. Further equipment variants on request.
Request for a quoteGermany
Aluminum valve cups (sometimes also referred to as aluminum valve caps) are a mission-critical component for the dispensing solutions industry, represented primarily by aerosol cans. This specialized packaging is used across diverse markets including personal care, food, industrial, household and pharmaceutical. Novelis is a key global supplier to valve-cup manufacturers, ultimately supplying thousands of brands with high-quality and innovative dispensing solutions. Our basic objective is to ensure that our aluminum-valve-cup customers remain the preferred providers of innovative packaging, dispensing systems and solutions, consistently contributing to the success of their customers globally. Currently, Novelis products in coil form, like 5745 (H42) and 5052, with gauges (0.41 mm to 0.39 mm) and diverse widths, and coatings are helping them achieve their mission.
Request for a quoteChina
tuyere cap manufactured by CNC turning size outer diameter: 23 mm, 24 mm inner diameter: 19.3 mm hole diameter; 8.2 mm height: 15 mm with female thread M19x1 material: aluminum alloy ASTM 6061 surface finish: anodic oxidation, blue color
Request for a quoteChina
tube cap screw material: aluminum alloy 6061-T4 finish: clean and deburred external thread: 1/2-20 UNF 2A size: external diameter 0.750 +/-0.015 inch, length 1.125 +/-0.015 inch socket hex incircle diameter 0.390 +0.010/-0.000 inch, depth 0.31 inch, to accept 3/8” hex key Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
dia 92mm metal closure for widemouth cosmetic jars, with plastic PP inner cap and PE liner assembled, this aluminum cap for jar is screwon neck, easy to open and close. Available at 2 different heights (16.5mm and 21mm) for selection. Use for mainly used as closures of cosmetic jars filled with thick formula like cream, butter, scrub etc. Decoration available custom color at matte or glossy finish, printed logo, embossed or debossed logo can be added as per request.
Request for a quoteFinland
Our LuxTop -luxury aluminium closures have been developed together with our partners to offer you a luxurious and aesthetic closure to your premium beverage. LuxTop closure consists of a fine aluminium cap and a plastic thread insert. Over many years Finn-Korkki has built a strong set of skills in luxury aluminium closure design, development, and manufacture. These skills have allowed us to offer luxury aluminium closure solutions to different beverage manufacturers. Our key skills are in offering design ideas, experience of stamping aluminium of various thicknesses and knowledge of techniques for securing a plastic thread into an aluminium cap. LuxTop -Luxury aluminium closure gives an excellent look and feel to your premium beverage, and it strengthens the brand message from the packaging side. The closure can be branded by combining different colours for the plastic thread insert and the aluminium cap. The top of the aluminium cap can be printed or embossed.
Request for a quoteTaiwan R.O.C.
RINSER: Able to wash different sizes of glass and plastic bottles. FILLERS: Gravity: fresh milk, drinking yogurt, fresh fruit juice (fiber content) Convection: tea drink, juice without granules, mineral water... Positioning Piston: High & low viscosity liquids with granules (yoghurt, sauce...) Volumetric Piston: High viscosity sauce Equal Pressure: Sparkling water, Champagne, beer, soft drinks... High Vacuum: high viscosity sauces, ketchup... Flow meter: Filling accuracy Weight: Filling accuracy Injection Bag: All valves and fittings in contact with the product are of medical standard. CAPPER: Star wheels respectively used for plastic bottles and caps operated synchronously to be precisely aligned and screwed at high speed. Press-On Capper For Aluminum Cap: Top pressure and side pressure can be adjusted. Crown capper: Crown caps sealed on the bottle opening. Gravity Filler - Cork /aluminum Capper: 3 in 1 machine
Request for a quoteItaly
V7 S fuel tank cap, in aluminium or stainless steel and anodised aluminium material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated and can be equipped with safety chains or cables and removable filter. On request it can be supplied in other colors ( blue, red, gold ) for various needs in different sectors. We manufacture types with anodised aluminium cap covering and the other metal components in stainless steel, for nautical application and corrosive environments. The V7S fuel tank plug is usually supplied with our bayonet filling systems passage 40 mm with flange, to be screwed on the hulls of boats or inflatable boats, on the special vehicles bodies or on the canopies of industrial machines;
Request for a quoteItaly
ASM.OB fuel tank cap, in aluminium or steel material, with internal bayonet coupling, passage diameter 30 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the ASM.OB tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. We can supply versions equipped with safety chains or cables and with customized writings, company logos and drawings. This product shall be sold with our bayonet filling systems passage 30 mm. ASM.OB is used particularly for fuel and oil tanks. in many applications of different industrial sectors
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Italy
240 fuel tank cap with key, in steel and stainless steel material, with internal bayonet coupling, passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the 240 tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. We can supply it also with black cap covering and, at your request, a version with aluminium effect of cap covering. We manufacture types with all metal components in stainless steel for nautical application, corrosive environments and Urea solutions (AUS 32 (AdBlue®)).
Request for a quoteGermany
Designed as in-tank suction strainer elements for direct installation into suction lines of pumps; should always be installed below the minimum fluid level of the reservoir Features ▪ Available with female BSP thread (ISO 228) or female NPT thread (ANSI B1.20.1) Materials ▪ Threaded end cap made of glass-fibre reinforced Polyamide (PA) or Aluminium ▪ Lower end cap and support tube made of Steel, zinc-plated ▪ Standard filter material is Stainless Steel Mesh (125 μm); alternative micron ratings of 60 μm and 250 μm on request Consult STAUFF for alternative materials. Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Technical Data ▪ Operating temperature range: -20 °C ... +100 °C / -4 °F ... +212 °F ▪ Integrated bypass valve with an opening pressure of 0,2 bar (3 PSI) to reduce the risks of high-pressure drops that can be caused by contaminated strainer elements or high-viscosity fluids Special sizes, designs, materials and...
Request for a quoteGermany
Designed to be used as lockable filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments Types ▪ SMBL-C (Clamping version) ▪ SMBL-P (Screw-in version) ▪ SMBL-P (Push-on version) Features ▪ Available as clamping version (with 3 clamping jaws), as threaded version (with female BSP thread) or push-on version, suitable for stand pipe mounting with pipe diameters up to 77,5 mm / 3.05 in (secured by 3 locking screws) ▪ Key-lockable cap (2 keys included) ▪ Lock protected by rotating flap ▪ Air flow in both directions, one direction only or no direction Materials ▪ Breather cap made of Aluminium, lacquered (light-grey, RAL 9022) ▪ Breather body made of Aluminium, zinc-plated ▪ Basket made of Steel, zinc-plated or Polypropylene (PP) ▪ Sealings made of NBR (Buna-N®) (standard option); FPM (Viton®) sealed version available Technical Data ▪ Operating temperature range: -30 °C ... +100 °C / -22 °F ......
Request for a quoteGermany
Designed for direct installation into return lines to reduce fluid aeration, foaming and noise; should always be installed below the minimum fluid level Features ▪ Available with female BSP thread (ISO 228) or female NPT thread (ANSI B1.20.1) Design and Materials ▪ 2 concentric tubes with inner spaced holes ▪ Installation below the minimum fluid level of the reservoir with the plain area facing the pump inlet ▪ Threaded end cap made of Aluminium ▪ Other components made of Steel, zinc-plated Special sizes, designs, materials and configurations are available on request. Consult STAUFF for details. Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Technical Data ▪ Operating temperature range: -20 °C ... +100 °C / -4 °F ... +212 °F ▪ Max. working pressure: 20 bar / 290 PSI
Request for a quoteGermany
Closure Systems International’s Series 8000 capping machines are specifically engineered for aseptic filling and ultra clean applications. These cappers incorporate full stainless steel construction and the most advanced corrosion-resistant materials. The open design facilitates cleaning and rinsing to optimize hygiene levels. Series 8000 machines are fully metric, perfect for global use and are suitable for plastic and aluminum caps. High Performance Features for "Aseptic" Capping Full stainless steel construction to prevent corrosion Open design for ease of cleaning and 100% rinsing Pick station drive unit designed with sloping surfaces and lubricant-free hybrid bearings to maintain cleanliness Pick station provides precision closure delivery with minimal contact points to improve hygiene Lubrication free spindles utilizing state of the art materials and design technologies to provide extended and predictable maintenance intervals of 4,500 hours Headsets specifically developed...
Germany
With its full stainless steal and modular construction, Closure Systems International's Series 5000 Combi Capping Machine is recognized in the industry for its reliability, low maintenance, and flexibility. This durable and versatile capper allows bottlers to effectively apply a wide variety of closures, especially aluminum caps, including: TSROPP, ROPP, screw caps, lug caps, Ring Pulls, and T-Corks for glass, aluminum, and PET bottles. In fact, Series 5000 Combi, allows plastic closures (CIH) and metal roll-on caps to be applied on the same capper using the same spindle. Reliable & Robust Robust, durable construction for long-lasting performance Full stainless steel construction to prevent corrosion Stainless steel turret Stainless steel spindles with wear-resistant plastics Stainless steel headsets New modular spindle assembly Proven headset designs for highly consistent closure application and torque control High throughput Plastic: 42 BPM / 2,520 BPH per head Roll On: 50 BPM.
Germany
With its full stainless steel and modular construction, Closure Systems International’s Series 5000 capping machine is recognized in the industry for its reliability, low maintenance and flexibility. This durable and versatile capper allows bottlers to effectively apply a wide variety of closures, especially aluminum caps, including: TSROPP, ROPP, screw caps, lug caps, Ring Pulls, and T-Corks for glass, aluminum and PET bottles. Reliable & Robust Robust, durable construction for long-lasting performance Full stainless steel construction to prevent corrosion Stainless steel turret Stainless steel spindles with wear-resistant plastics Stainless steel headsets New modular spindle assembly Proven headset designs for highly consistent closure application and torque control High throughput Plastic: 42 BPM / 2,520 BPH per head Roll On: 50 BPM / 3,000 BPH per head CSI Cap-in-Head technology assures proper closure placement at high speeds for optimized cap application Direct integration.
Germany
Closure Systems International’s Series 501 Capper is a single head capping machine that operates in a manual configuration for sealing bottles and containers of various shapes and sizes. The Series 501 bottle capper is popular for custom package applications and small volume production, such as in performance laboratory and research environments. Simple Operation Can quickly and easily change package and closure sizes on the single head by adjusting the bottle stop and operation height Bottles and closures are positioned manually, allowing for automatic capping by the lowering of the headset onto the bottle finish High Performance Standard Features Neck support assembly Bottle control support increases package size range for small bottles Available with single stroke or two-stroke options for lightweight aluminum packages Versatile & Customizable Can be configured for a wide variety of closure types, including plastic closures and aluminum roll-on caps; includes parts for quick.
Germany
Closure Systems International’s PP136 Capper is a single head capping machine that operates in a manual configuration for sealing bottles and containers of various shapes and sizes. The PP136 bottle capper is popular for custom package applications and small volume production, such as in performance laboratory and research environments. Simple Operation Can quickly and easily change package and closure sizes on the single head by adjusting the bottle stop and operation height Bottles and closures are positioned manually, allowing for automatic capping by lowering the headset onto the bottle finish High Performance Standard Features Neck support assembly Bottle control support increases package size range for small bottles Robust construction: machine body made of cast iron Versatile & Customizable Can be configured for a wide variety of closure types, including plastic closures and aluminum roll-on caps; includes parts for quick changeover Can be designed for many package...
Germany
For over 30 years, GESCO-metall GmbH has stood for quality, competence and experience in the field of contract bending. The production focuses are curved parts for windows, doors and facades as well as complex special profiles for industrial construction, vehicle manufacturing, plant engineering and medical technology. It goes without saying that we also bend aluminium cover caps for the wood/aluminium field. Our bending technology range is rounded off by complete curved elements, including electrolytic oxidation of aluminium, powder coating, metal fittings and glass together with window sills and soffit cladding. You will find more information about bending technology, contract bending, profile bending, portholes, in our product section: Contract Bending Work, Curved Elements, Window Sills, Portholes, Glazing Frames – Door Windows.
Request for a quoteResults for
Aluminium caps - Import exportNumber of results
47 ProductsCountries
Company type
Category