Aluminium alloy metallization - Import export

Aluminum and aluminum alloy Mono Wire diameters: 0.12mm - 9.5mm (.0047'' - .3800") Telmaksan, aluminium wires are manufactured according to the EN 573-3 standards. TELMAKSAN is delivering the best quality of aluminum wires to increase the quality of customers products for metalization use.

Laser cutting bending aluminum sheet metal parts

We process the following materials: ■ chrome-nickel steel ■ various types of steel ■ non-ferrous metals ■ various aluminium alloys steel processing, stainless steel, machine engineering, tool engineering, metal processing, sheet steel processing, material 16 Mo3, Hardox, 1.4301, 1.4571, 1.4404, S355, S235, metal products, steel products, supplier construction machinery, power station, energy station, offshore equipment, pipes, steel halls, metal construction, profiles, handrails, balconies, stairs, roofing, pallet warehouse, pallet inverters, scrap conveyors, transport racks, special frames, devices, die blocks, barrel press, fork shoes, fork extensions, industrial gates, fences, customized constructions, industrial service, furnaces, playgrounds, sports fields, cladding, casing, housing, covers, noise-protection cabins, machine frames, large milled parts, conveyor technology, conveyor line, plunge pools, tank barrels and much more

It is a material widely used in machinery industry. It is a material with relatively hardness, rigidness, slippery and good mechanical strength values. There are various uses for its gear applications, including wheel construction. However, it is not as hard and abrasion resistant as Kestamid, not as slippery as Pom C. Its chemical strength is moderate, and it is resistant to some acids and bases. The polyamide 6 has the ability to collect water on its own. These features have pros and cons. Pros is that it increases the strength of the part against vibration and sudden impacts. This allzws the dynamic stresses that would otherwise occur during part use to be removed within itself. Cons is that it is difficult to achieve measurement stability in the material. In other words, the material is affected even by the moisture in the air and gets changes in the measurement. The tolerances must be observed before finishing the final processes of the part.

Kestlub® is a special cast polyamide developed for bearings. Casting polyamide is produced by adding additives with special processes. Thanks to its internal lubrication, it excellently performs especially in bearing applications.

In open air, resistant to fresh and salty water, sulphuric, sulfurous, phosphoric and chromic acids. Affected by acetic formic and nitric acids.

With a simple fusion, two parts can be combined. Large and heavy parts such as blocks and pipes can be welded using eutectic and tin-lead solder or melting alloys with low fusion points. CORROSION FEATURES Resistant to distilled, salty and fresh water. Affected by strong acids, alkalis and acid salts. Oxygen presence in solution increases response speed.

Bar, Sheet Plate Pipe, Profile, box profile, Angel Ring, Special profiles, Flat aluminum plate, Aluminum tread plate, Aluminum knurled plate, Thin wire coil and hard molding aluminum

Produits moulés en alliages cuivreux - Paliers porte garniture pour arbre de propulsion en cupro aluminium

Introducing Metallic Silica, an exceptional 4.4.1 grade Metal Silicon that elevates the performance of aluminum to new heights. Specially formulated to enhance its castability, hardness, and strength, this remarkable product is designed to meet the most demanding industrial requirements. Our Metallic Silica is meticulously crafted using cutting-edge technology and adheres to the highest quality standards. With its superior composition, it acts as a catalyst, bringing forth remarkable improvements in the properties of aluminum. When incorporated into aluminum alloys, our 4.4.1 grade Metal Silicon works wonders, enhancing the castability of the metal. This means smoother and more precise casting processes, resulting in superior finished products. Whether you're in the automotive, aerospace, or construction industry, Metallic Silica is the ideal choice to optimize the properties of your aluminum products.

We perform various bending, edging, and forming procedures based on our client's needs and requierements: - Sheet metal bending, - CNC tube/pipe bending, - And bending of elements obtained through other technological operations. Capabilities for metal sheet edging and bending: - Advanced press brakes with wipe dies to allow precise bending with minimal distortion. - Wide range of bend angles and radii: we can make sharp bends, complex curves, and intricate forms, tailored to your needs. - Wide range of materials: steel, stainless steel, aluminum, alloys, and other sheet metals. - Sheet bending up to 4000 mm. Capabilities for pipe bending: - Our machines allow us to bend pipes up to Ø25 mm in diameter.

High quality self-tapping ensat thread inserts. Made of ASIS 304 stainless steel Long version with three cutting holes, Ensat 308 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Similar to Ensat 307 but longer, so can be applied in thicker materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.). These self-threading bushes have an internal thread for the screw and an external thread with cutting slots to insert itself into the material

High quality zinc plated steel self-tapping ensat thread inserts. Made of galvanized steel, conforming to RoHS, this ensures excellent wear and corrosion resistance Long version with three cutting holes, Ensat 308 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Similar to Ensat 307 but longer, so can be applied in thicker materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.).

High quality self-tapping ensat thread inserts. Made of ASIS 304 stainless steel Short version with three cutting holes, Ensat 307 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Also Ensat 307 inserts are shorter than Ensat 308 and therefore ideal on thinner materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.).

High quality zinc plated steel self-tapping ensat thread inserts. Made of galvanized steel, conforming to RoHS, this ensures excellent wear and corrosion resistance Short version with three cutting holes, Ensat 307 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Also Ensat 307 inserts are shorter than Ensat 308 and therefore ideal on thinner materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.).

High quality brass self-tapping ensat thread inserts. Particularly suitable for light metals and all types of plastics, both thermoplastics and thermosets This is the most popular model of self-tapping inserts with two cutting slots in the conical end part of the insert. Due to the cutting slots, the thread inserts remain anchored in the material even under strong shocks or vibrations. Suitable for most applications. Ensat 302 standard These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.). These self-threading bushes have an internal thread for the screw and an external thread with cutting slots to insert itself into the material Made in the EU.

High quality self-tapping ensat thread inserts. Made of ASIS 304 stainless steel This is the most popular model of self-tapping inserts with two cutting slots in the conical end part of the insert. Due to the cutting slots, the thread inserts remain anchored in the material even under strong shocks or vibrations. Suitable for most applications. Ensat 302 standard These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.). These self-threading bushes have an internal thread for the screw and an external thread with cutting slots to insert itself into the material Made in the EU.

60 inch long,1/4 inch yellow,blue.and red hoses feature a 800 PS: working pressure and 4000 PSI burst pressure - ideal for standard refrigerants. Easy to operate and install.strong sealing for duraoiiity and safety .Necessary tools for HVAC.car air condition maintenance and coolant or Freon adding. Refrigerant charging hose with Diagnostic Manifold Gauge Set deigned to meet 1/4" SAE requirement for refrigerant permutation, fit most refrigerants like R410A, R22,R404.Standard 1/4 inch female flare fittings with a valve core depressor and 4S*bend on one end for convenient access to the system Manifold with built-in sight glass. DuraOle metal casing. Aluminum alloy testing manifold body R410A Connectors (2pc): 5/16" SAE. refrigerant anti blowback fittings refrigeration charging hoses valve discharge conditioning refrigerant charging refrigerant discharge recharge yellow jacket interdynamics conditioning recharge Bundle

We perform various bending, edging, and forming procedures based on our client's needs and requierements: - Sheet metal bending, - CNC tube/pipe bending, - And bending of elements obtained through other technological operations. Capabilities for metal sheet edging and bending: - Advanced press brakes with wipe dies to allow precise bending with minimal distortion. - Wide range of bend angles and radii: we can make sharp bends, complex curves, and intricate forms, tailored to your needs. - Wide range of materials: steel, stainless steel, aluminum, alloys, and other sheet metals. - Sheet bending up to 4000 mm. Capabilities for pipe bending: - Our machines allow us to bend pipes up to Ø25 mm in diameter.

We perform various bending, edging, and forming procedures based on our client's needs and requierements: - Sheet metal bending, - CNC tube/pipe bending, - And bending of elements obtained through other technological operations. Capabilities for metal sheet edging and bending: - Advanced press brakes with wipe dies to allow precise bending with minimal distortion. - Wide range of bend angles and radii: we can make sharp bends, complex curves, and intricate forms, tailored to your needs. - Wide range of materials: steel, stainless steel, aluminum, alloys, and other sheet metals. - Sheet bending up to 4000 mm. Capabilities for pipe bending: - Our machines allow us to bend pipes up to Ø25 mm in diameter.

We perform various bending, edging, and forming procedures based on our client's needs and requierements: - Sheet metal bending, - CNC tube/pipe bending, - And bending of elements obtained through other technological operations. Capabilities for metal sheet edging and bending: - Advanced press brakes with wipe dies to allow precise bending with minimal distortion. - Wide range of bend angles and radii: we can make sharp bends, complex curves, and intricate forms, tailored to your needs. - Wide range of materials: steel, stainless steel, aluminum, alloys, and other sheet metals. - Sheet bending up to 4000 mm. Capabilities for pipe bending: - Our machines allow us to bend pipes up to Ø25 mm in diameter.

We perform various bending, edging, and forming procedures based on our client's needs and requierements: Sheet metal bending, CNC tube/pipe bending, And bending of elements obtained through other technological operations. Capabilities for metal sheet edging and bending: Advanced press brakes with wipe dies to allow precise bending with minimal distortion. Wide range of bend angles and radii: we can make sharp bends, complex curves, and intricate forms, tailored to your needs. Wide range of materials: steel, stainless steel, aluminum, alloys, and other sheet metals. Sheet bending up to 4000 mm. Capabilities for pipe bending: Our machines allow us to bend pipes up to Ø25 mm in diameter.

China Tube Components Manufacturer Custom Metal Tube Handles Of Aluminum Alloy, Carbon & Stainless Steel Tubes Tube end forming: A forming process used to create a specific end, usually to allow the tube to connect to another media. Cutting: The cutting process allows for metal tubes to be cut into specific shapes and sizes. Examples include tube laser cutting and mechanical cutting. Notching: This process creates notches at the end of the tube to simplify welding processes or to attach the tube to another part. Swaging: Swaging uses a die to manipulate the size of the tube diameter using force. Custom Metal Tube Forming Components, Seat Frame, Tube Handle, Yacht barrier... sales@mxmparts.com

1.Size:24 x 6.5 x 2.4 cm 2.Material: Metal+aluminum alloy+stainless steel 3. Accessories: ear needles 4.Weight:346g /1 piece 5. Application for cattle/pig/sheep and other animal ear marking with ear tag applicator

1.Size:24 x 6.5 x 2.4 cm 2.Material: Metal+aluminum alloy+stainless steel 3. Accessories: ear needles 4.Weight:346g /1 piece 5. Application for cattle/pig/sheep and other animal ear marking with ear tag applicator

1.Size:24 x 6.5 x 2.4 cm 2.Material: Metal+aluminum alloy+stainless steel 3. Accessories: ear needles 4.Weight:346g /1 piece 5. Application for cattle/pig/sheep and other animal ear marking with ear tag applicator

1.Size:24 x 6.5 x 2.4 cm 2.Material: Metal+aluminum alloy+stainless steel 3. Accessories: ear needles 4.Weight:346g /1 piece 5. Application for cattle/pig/sheep and other animal ear marking with ear tag applicator

1.Size:24 x 6.5 x 2.4 cm 2.Material: Metal+aluminum alloy+stainless steel 3. Accessories: ear needles 4. Application for cattle/pig/sheep and other animal ear marking with ear tag applicator

Rapid tooling Service We offer rapid tooling service, when parts demand quantity is hundreds to thousands,you will need to consdie this service and when your demand items are similar structure, types are many and demand quanity is not big then quick Turn Tooling. Rapid tooling for plastics and Die Casting of metal (Aluminum alloy or Zinc Alloy). Also we has stable surface treatment partner with different finishing like sand blasting, texture, painting, powder coating and so on, depending on our customers' requirements. We can make tool life to be 5k to 100ks or more. So if you have such project coming, you are welcomed to inquiry us freely . What Is Rapid tooling Rapid tooling is starting to be used to create molds for commercial operations,to simplify the mould structure for low cost & short lead-time. Rapid tooling provides a way to quickly provide molds to moulding the required products for low volume production demand. apid tooling material usually are Al7075 and...