Alarms- fire - Import export

Light and sound sirens are used in fire alarm systems, in evacuation control systems, extinguishing systems etc. 13 variants of labels (or custom) and modifications for the power supply voltage of 12 or 24V.

Intrinsically safe light and sound sirens are used in fire alarm systems, in evacuation control systems, extinguishing systems etc. in explosive areas Power supply voltage - 12 V 5 variants of labels (or custom).

PS2415 is used to power the components of fire alarm system, fire extinguishing equipment and alert equipment with an operating voltage of 24 V.

Body: Ductile Iron / Stem,Springs: Stainless Steel / Disc: Brass or Aluminium or Bronze / Disc gasket or Disc washer : EPDM / ** Connection Type: Flanged or Grooved / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** The wet alarm valve is designed for applications where the water is unlikely to freeze. The water staying pressurized in the pipes is released over the fire area after the sprinkler is activated due to fire. The pressurized water system is not only feed contionuously, but also fills in the retard chamber. After the chamber is filled, the pressure switch on the chamber is actuated. The pressure switch sends the alarm information to the fire warning system or the automation system. After the pressure switch is actuated, the water is delivered to the water-motor gong and releases a mechanical alarm.

Run with 24Vdc (+/-10%) supply Relay contact output Long maintenance-free service life

Fire Hose Reel Cabinets are manufactured as surfaced or recessed wall mounted, glass lids, or sheet metal lid with fire extinguisher compartment. House reel mounted inside the cabinet which door opens 180º. The reel can easily be removed from the cabinet to facilitate the installation. All cabinets are painted untouched by human hands as requested RAL color at our open painting ovens.

The Fibreflam ISO6 curtain is a flexible partitioning curtain without irrigation. With a fire resistance degree of EI60, it also conforms to the DAS NF S61-937-1 and -4 standard. Thanks to its control panel and its motor operating in 400V, the closure of the curtain is obtained by gravity in case of fire alarm. Only its reopening is motorised. The standard dimensions of this fire curtain are up to 4.36 m wide and 4.21 m high. In spaces with strong architectural constraints, this curtain can easily be hidden behind cladding. We can help you with this project, so don't hesitate to submit your requirements via this contact form or by clicking on our website

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

Addressable fire alarm control panel with 2 loopsIntended to protect premises of any size. This is a new look at fire safety: a modern software and hardware platform, high technologies, an affordable price and impressive capabilities that are not characteristic of any domestic analogue.

DETECTO MNL100 is an addressable manual call point designed to work as part of the Tiras PRIME A system. It is installed in the protected premises for generation a fire alarm signal in manual mode.

12 V power supply unit with a maximum load current of 3 APS1230 is used to power the components of security alarm and fire alarm systems.

DETECTO MNL100 is an addressable manual call point designed to work as part of the Tiras PRIME A system It is installed in the protected premises for generation a fire alarm signal in manual mode.

Used for operation as a part of the conventional fire alarm system. SPT Tiras Ex is an intrinsically safe modification designed for use in explosive areas.

Used for operation as a part of the conventional fire alarm system. SPR Tiras Ex is an intrinsically safe modification designed for use in explosive areas.

ECD "Tiras 1X" is intended to control one direction of fire extinguishing (gas, powder, aerosol). It can operate in autonomous mode or as part of fire alarm systems "Tiras PRIME" or "Tiras PRIME A".

Addressable sound and light siren ALARMO 110 for fire alert fire alarm systems based on FCP Tiras PRIME A.

Light signs are used in Fire Alarm Systems and Intrusion Alarm Systems. The sign is highlighted by LEDs, which makes the label visible in the dark period of the day. The sign is powered by a voltage of 9-28 V.

Fire Sprinklers * PENDENT TYPE SPRINKLERS / UPRIGHT TYPE SPRINKLERS / SIDEWALL TYPE SPRINKLERS / SQUARE COVER PLATE ** Materials: Brass / Orifice: K80(5,6), K115(8,0) / Response : Standard and Ouick / Activation Temp.: 57ºC , 68ºC, 79ºC, 93ºC, 141ºC / Connection Dia.: 1/2'', Working Pressure: 175 PSI (12,1 Bar), Connection Type: Thread (NPT) *** Application Areas: Residences / Hotels / Hospitals / Business Centers / Hostel / Shopping Centers / Parking Areas / Garages / Factories / Storages etc.

Overground Fire Hydrant / Body, Lower and Upper Pipe: GG-25 Cast Iron / Coupling: Aluminium Alloy / Handwheel : GG-25 Cast Iron / Disc : GGG-40.3 Ductile Iron / Check Valve: Brass / Upper shaft : Stainless Steel / Shaft motion pipe: Galvanized steel or Stainless Steel ** Application area: Fire installations

Body and Cover : GG-25 Cast Iron / Handwheel: GG-25 Cast Iron / Gasket: EPDM / O-ring: EPDM / Spindle: Stainless steel / Segment Gear : GG-25 Cast Iron . ** Connection Type: Flanged / Working Pressure :175-300 PSI / Working Temp.:-10ºC , + 120ºC / Working Test Pressure : 600 PSI *** NRS gate valve is developed to be used as the cut off and zone control valves in order to substitute supervisory switched butterfly valves and OSY rising stem valves in the fire security systems. These valves are usually burried underground to prevent the risk of freeze. Just to make them visible and traceable inside the systems, they are preferred to be used with post indicators instead of wheels. **** Application Areas: In fire fighting systems, which is non-affected by freeze, than they are using under the soil.

Body: ASTM B-536 Nylon- 11 Coated / Gear Box: ASTM A-536 / Disc: ASTM B-356 EPDM Encapsulated / O-Ring: EPDM / Handwheel: ASTM A-536 / ** Connection Type: Flanged or Grooved or Threaded / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** It is identified as a local control valve. It is used as a shut-off valve on water feed lines to disconnect (control) in-situ zones. A butterfly valve or rising stem valve is used to shut off or control. the position of all valvesused in fire systems should be visible and electrically traceable. Butterfly valves are of a gearbox handwheel type. The supervisory switch of a butterfly valve are located inside the valve and there is an on/off indicator on it. **** Application Areas:Residences / Hotels / Hospitals / Business Centers / Shopping Centers

Body and Cover : GG-25 Cast Iron / Handwheel: GG-25 Cast Iron / Gasket: EPDM / O-ring: EPDM / Spindle: Stainless steel / Segment Gear : GGG-40.3 Ductile Iron. ** Connection Type: Flanged / Working Pressure :175-300 PSI / Working Temp.:-10ºC , + 120ºC / Working Test Pressure : 600 PSI *** OS&Y gate valve is developed to be used as the cut off and zone control valves in order to substitute supervisory switched butterfly valves in the fire security systems. Just to make them visible and traceable inside the systems, they are preferred to be used with post indicators instead of wheels. **** Application Areas: It can be use in every fire fighting systems, but it usually use in water tank and in front of the pumps.