Air fire - Import export

The FDABURML coupling module is a combination of an air valve and a fire damper, coupled with a single housing. This is an alternative to typeical fire valves. The main advantages of the FDABURML are better fire rating and a smaller size with more product configurations and application options. The main component of the coupling module is the CFDM fire damper. The fire damper is available in Ø 100, 125, 160, and 200 mm. The wing blade of the damper provides a very low resistance to the air flow. The fire damper can be ordered with one or two optional limit switches to feed back the actual blade position. The FDABURML coupling modules match the most popular versions of air supply or exhaust valves which can be replaced with one another, even with the coupling module installed in a partition or already in use. The entire coupling module is compact. As a result, the air valves with the mounting frames cannot exceed 50 mm in height.

Media: hydraulic oil, cooling water, compressed air, fire fighting water, Electric signal lines, electric power lines Constructions from 2 ways up to 14 ways

OIL HEATER FAN IDE 50The indirectly fired oil fan heater IDE 50 ensures clean, dry hot air Indirectly fired air heaters such as the oil heater fan IDE 50 are an ideal solution to provide large amounts of clean and dry hot air, as it is required for the heating of construction sites, marquees, exhibition halls, workshops or stables. Longer outdoor applications are no problem for the oil heater fan IDE 50, because it is provided with a durable housing made of doubly coated material, borne by a smooth-running carriage construction with cable holders and installed fuel tank. When employing the optionally available flue gas discharge, this heating device can also be flexibly used for the fully automatic heating of closed rooms.

Coating of pipings and air ducts, firing, boiler and heating systems, tanks, exhaust systems, silencers, light-metal bodies on utility vehicles Repairs to mechanically (stone impact) or chemically (de-icing salt) damaged aluminium rims Shielding of non-metallic materials, e.g. cardboard, wood, glass or plastics etc. Advantages and benefits Excellently suited for sole, decorative corrosion protection Universal protective and decorative coating for all materials Economical due to low consumption and self-cleaning spray valve High covering capacity Fast-drying

Airflow system for the Desiro ML/ÖBB, Austria Having developed and manufactured the airflow system for the Desiro ML Mittelrheinbahn and the Desiro ML Brussels, TC is now also producing the airflow system for the Desiro ÖBB. The respective systems are based on pultruded profiles made of fibre glassreinforced plastic. For the air ducting system, the fire protection properties of the GRP profiles were set in such a way as to meet the requirements in accordance with EN 45545.

Our standard Downdraft Spray Booth draws non-pressurized fresh filtered air, from a ceiling-mounted supply plenum, which then flows uniformly over the entire work area and out through a filtered, grated in-floor or grids basement exhaust plenum – creating an optimal spray coverage environment. Spray Booth Specifications: The main room & generator system: Wall panel: sandwich style, δ=50mm，rock wool available as required. Basement: steel structure, full grids，ramp: 2 pcs of grids. Door: 3 pcs of front door without aluminum side cover. 1pcs of emergency door with pressure lock. One 11kw intake fan and one 11kw exhaust fan. DUCTS: Electrical VCD. one pressure meter. Spraying/baking transition damper, automatically air controlled. Fire protection equipment: 1set, the inductor control closed; energysaving equipment: 1set. 4m straight exhaust ducts, one 90° bend, and one 60° bend.Intake duct :4m straight exhaust ducts, one 90° bend, and one 60°bend. 4m straight chimney and 2 small bends.

Power cable with copper cores, EPR insulation, PVC sheath, shield: copper foil, tape or braids, armour: zinc-coated steel wires, aluminium tapes, zinc-coated steel tapes, aluminium wires.Application: these cables can be used indoor or outdoor, and in the air and in the ground. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured/halogen free)

The term inline filter refers to an expandable, bolted, modular system. Depending on requirements, appropriate filter and air injection sections are connected together in series. The capacity range extends from approx. 10,000–300,000 m³/h. RS / RX filter The RS / RX series are a proven, expandable, modular system with low-pressure purge-air cleaning. Depending on requirements, appropriate filter and air injection sections are connected together in series. The capacity range extends from approx. 20,000–300,000 m³/h. RS / RX filters are suitable only for vacuum and positive pressure operation. The housing parts are usually made of 2 mm thick galvanised sheet steel. A thicker material in a painted execution as well as in stainless steel is also optionally available. The RS / RX series is 2.85 m wide. Filter hose lengths of 3 m (standard) and 4 m are available for this. The RSEC series has been designed for smaller air quantities and for above-roof installation. This series has a housing width of 2.4 m and 2 m-long filter hoses. The filter hoses are manufactured from polyester needle felt; the filtering direction is from the outside inwards. Filter cartridges and filter tubes are alternatively possible. The filter hoses are cleaned off using the material-preserving low-pressure purge-air system. The purging trolley inside the clean air compartment drives over the hose openings either continuously or controlled by pressure. In the direction of movement the first filter hose row is neutralised, while the second row is flushed from the clean air side. The third row is likewise neutralised. This results in a draught delay, which is necessary in order to allow the dislodged dust to fall into the discharge. The dust is discharged by a tried-and-tested drag conveyor with a downstream cellular wheel sluice. The return air pipes are provided with fire protection flaps and switching devices for exhaust air operation. The filter housing has been tested for resistance to pressure surges. Standard safety devices include likewise tested explosion pressure relief devices, fire extinguishing systems, mechanical and thermal monitoring systems as well as pressure-surge-resistant and flameproof cellular wheel sluices. The transport fan is arranged on the clean air side and is not exposed to swarf and dust. Hence, the conditions of a dust explosion zone do not prevail in the transport fan. RSV/RXV filter This series essentially differs from the RS/RX series in that its fans are arranged on the clean air side. RSV/RXV filters are suitable only for vacuum pressure operation. The capacity range extends from approx. 20,000 - 300,000 m³/h. The filter hoses are likewise cleaned off using the material-preserving low-pressure purge-air system.

The SANHA®-Therm installation system consists of tried and trusted SANHA®-Therm press fittings from carbon steel (c-steel) with a black sealing ring from EPDM (ethylene propylene dien rubber monomere) and SANHA®-Therm carbon steel pipes according to EN 10305-3. The carefully manufactured installation systen and its components offer an economically attractive solution for closed heating installations. At the same time, SANHA®-Therm ist especially well suited for pressurised air and fire extinguishing systems according to EN 10346 (DZ version). The variant "Contiflo" also offers galvanized system pipes which are characterized by being easy to bend. Our C-steel system is furthermore available as a LABS*-free version (series 27000).

The ISOG 24 is breaking new ground here: For the first time, the airflow is directed downwards – physically convincing, as gravity goes in the same direction. Thanks to the controlled airflow, there is less fogging, which gives the operator a much better view of the grinding process. The supply air flows into the machine through a long opening at the top of the cabin. The airflows are smooth and straight, with low flow velocity. The airflow and the extraction are continuously monitored in real time and the real values are displayed in the machine data. These are compared with the minimum and maximum specifications of ISOG and displayed to the operator on the screen via a message as soon as the limit range has been reached. In addition, the exhaust air system has a fire protection flap as standard.

AJS supply a large range of dampers differing in style which provide varying safety features in ductwork systems which are connected to heating, ventilation and air conditioning systems from fire safety to regulating the air flow. There are various different styles of damper which can be used for different styles of application dampers include butterfly, non return, fire, smoke, constant and blast gate plus many more. Dampers are available with various different safety features.