Results for
GRONBACH
Germany
In the fluid dynamics laboratory of our Wasserburg competence centre, we design new fan wheels and turbines and optimise existing systems for performance, energy efficiency and noise emissions. We also develop complete systems of wheels with power units. Our range of tests includes suction operation, pressure operation and also unpressurised measurements. Revolutions up to 40,000 r/min and diameters of up to 250mm are possible. In our prototype department, we are able to simulate or modify the environmental circumstances of the fan wheels or turbines, thus achieving optimal operational conditions. Furthermore, we carry out mould-flow analysis, use ANSYS from external partners for the flow simulation and establish the fault probability and fault effect with FPFEs. New: Development of blower systems and optimization of ventilation systems.
Request for a quoteGRONBACH
Germany
We develop and manufacture blower components such as fans, motors, duct guides, electronics and housings and, if desired, integrate them into assemblies and devices. In addition, we develop entire blowers as well as the required equipment. Furthermore, we are your contact for fan optimisation with regard to improved volume flow, more efficient volume pressure and noise reduction.
Request for a quoteMETMANN
Spain
High-reach diffusers with 3-way air outlet. - Admissible flows from 5,500 m3/h to 63,000 m3/h. - Made of galvanized steel painted in oven-dried polyester powder paint in RAL 7035 gray. - Simple deflection grilles with slats made of polyamide. - Opening regulation from 0º to 90º. - Possibility of supply with double deflection grids. - 30mm METU clamping frame.
Request for a quoteMETMANN
Spain
AD BIGGER PREMIUM evaporative air conditioners for evaporative air conditioning in industrial, commercial, agricultural or livestock premises Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people. The AD BIGGER PREMIUM evaporative air conditioners, develop an air flow from 46,922 m3/h to 60,644 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 750m2 to 1,100m2. For larger surfaces more units can be installed.
Request for a quoteMETMANN
Spain
Air long throw nozzle - Admissible flow rates from 50 m3/h to 1,750 m3/h. - Made of polyamide. - Maximum working temperature of 70 ºC. - 45º inclination and 360º rotation. - Supply in boxes of 10 units with all the fixing elements.
Request for a quoteBIOSYS GMBH
Germany
Biyovent, the intensive care type mechanical ventilator device, has been designed for patients who cannot breathe by themselves or who have di culty in breathing. Biyovent, which was actualized for the purpose of o ering products with a high technological threshold value, fully meets the needs with its new generation technology. It o ers high-quality for both technology and health thanks to its characteristics that cover all the deficits that the ventilators used so far cannot o er and cannot meet the demands of doctors. Integrated Nebulizer High Flow Oxygen Therapy and N-CPAP (nasal C-PAP) Suitable for Pediatric, Adult and Newborn (Optional) Patients Smart Ventilation Modes
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the parts used in ventilation system.Used for urban building ventilation, household product ventilation and other products.
Request for a quotePLUS SAFETY
Turkey
With the AIR Free Coniotomy application, the patient's airway is opened in as little as 22 seconds. Due to the obstruction of the upper respiratory tract, very serious life risks occur. The Air-Free Coniotomy Set is currently available in 2 sizes, Child and Adult. Contents of the Air Fre set 1 Trocar with Scalpel Fixed 1 Standard Adapter 1 Piece Artificial Respiration Apparatus 1 Piece Manual Aspiration Catheter 1 Piece Neck Fixation Tape It provides the opportunity to apply Coniotomy in a very short time (approximately 22 seconds). It provides risk-free and easy use.
Request for a quoteYALCIN GROUP
Turkey
DETAILS General Features: We provide ventilation with our own production snail fans using polypropylene material . Technical Specifications: Areas of Use:
Request for a quoteMETMANN
Spain
High flow industrial roof extractor for the extraction of stale air HELIX BOX MANN industrial roof extractors have an extraction capacity from 21,000 m3/ h to 39,800 m3 / h and are the perfect solution for the extraction of stale air in industrial buildings, warehouses, farms, greenhouses, etc. Main features - Air flow from 21,000 m3/h to 39,800 m3/h - External structure made of galvanized steel. - Overpressure shutter made of galvanized steel. - Propellers made of AISI 430 BA stainless steel. - High quality bearings. - IP-55 three-phase electric motor - V-belts. - Transmission pulleys made of magnesium aluminum. - Engine support with tensioner. - Roof supports. - Air inlet with protection grid. - Anti rain visor.
Request for a quoteMETMANN
Spain
VIS MANN industrial air curtains are the perfect solution to prevent cold air in winter and hot air in summer. In addition, they provide an invisible barrier that prevents insects from entering the premises. VIS MANN A - Air only curtains VIS MANN E - Air curtains with electric resistances VIS MANN BAR - Air curtains with water coil
Request for a quoteMETMANN
Spain
High-reach diffusers with 6-way air outlet. - Admissible flows from 5,500 m3/h to 63,000 m3/h. - Made of galvanized steel painted in oven-dried polyester powder paint in RAL 7035 gray. - Simple deflection grilles with slats made of polyamide. - Opening regulation from 0º to 90º. - Possibility of supply with double deflection grids. - 30mm METU clamping frame.
Request for a quoteMETMANN
Spain
Portable evaporative cooler 10,080 m3/h with 16-speed - ECO FRESC The ECO FRESC portable evaporative coolers are ideal for cooling in a completely natural way and with low local energy consumption of up to 150 m2. To cool the air, evaporative cooling technology is used, which consists of passing the outside air through panels moistened with water. As the air passes through this area, it cools and increases its humidity. The treated air is driven by a fan inside the room and by renewing the indoor air comfort temperatures are reached. The necessary electrical power is 80% less than traditional air conditioning systems and by using water as a cooling element it avoids the emission of harmful gases into the environment. The ECO FRESC evaporative air conditioners have a 16-speed axial fan to adjust the necessary air flow at all times, they also have an electronic control in charge of performing all the equipment′s functions.
Request for a quoteVITAL PARTS LTD
United Kingdom
At Vital Parts we now stock a large range of advanced Vent Plug solutions, including Liquid Tight, Snap In and Threaded versions. Designed to provide ventilation towards internal components, these are a highly sought after product for use within hydraulic and pneumatic applications to prevent overheating or the entry of harmful cotaminants. Please check out our website to view all available sizes, styles and solutions we offer for these Vent Plugs, including Plastic Vent Plugs For Panel Holes and Nylon Ventilation Plugs.
Request for a quoteALNOR VENTILATION SYSTEMS LTD
Poland
EPP manifold boxes are used for heat recovery ventilation (MVHR). Due to EPP's insulating properties, MVHR manifolds do not need to be insulated. Manifold boxes are intended to distribute 75mm ducting around the house. The number of connectors varies based on the specifications of the user: 4-18 spigots.
Request for a quoteMETMANN
Spain
FRESC MANN PREMIUM portable industrial evaporative air cooolers from 5,760 to 13,511 m3/h The FRESC MANN portable industrial evaporative air cooler are ideal for cooling naturally and with low energy consumption in all kinds of work areas, event tents, heat sources, etc ... Its basic operating principle is to suck in the outside air and pass it through some panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. By carrying out this process, the air is propelled inside the premises to be air-conditioned, reaching pleasant comfort temperatures and adequate indoor air quality for people. FRESC MANN PREMIUM portable evaporative air coolers develop an air bed from 5,760 m3/h to 13,511 m3/h with an available pressure at a maximum flow rate of 100 Pa.
Request for a quoteMETMANN
Spain
AD BIG PREMIUM evaporative air conditioners for evaporative air conditioning in industrial, commercial, agricultural or livestock premises Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people. AD BIG PREMIUM evaporative air conditioners, develop an air flow from 18,140 m3/h to 36,678 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 300m2 to 615m2. For larger surfaces more units can be installed.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
METMANN
Spain
Industrial evaporative air conditioners with axial fan from 10,080 to 19,080 m3/h ECO COOLER evaporative coolers are a natural cooling system that provide cool, humid air in the room to be heated. To cool the air, evaporative cooling technology is used, which consists of passing the outside air through panels moistened with water. As the air passes through this area, it cools and increases its humidity. The treated air is driven by a fan inside the room and by renewing the indoor air comfort temperatures are reached. The necessary electrical power is 80% less than traditional air conditioning systems and by using water as a cooling element it avoids the emission of harmful gases into the environment. ECO COOLER evaporative air conditioners have a 16-speed axial fan to adjust the necessary air flow at all times, they also have an electronic control in charge of performing all the equipment′s functions.
Request for a quoteMETMANN
Spain
AD SMALL PREMIUM evaporative air conditioners for evaporative air conditioning in industrial, commercial, agricultural or livestock premises Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people. AD SMALL PREMIUM evaporative air conditioners, develop an air flow from 5,760 m3/h to 17,145 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 67m2 to 255m2
Request for a quoteASP GERMANY
Germany
The fan provides a permanent air circulation that keeps the robot dry. The volume of air is renewed preventing moisture from condensing inside the cover.
Request for a quoteCARBOMECH SP. Z O.O.
Poland
We offer comprehensive services in the design, construction, and installation of biofilters and ventilation systems, including: - Container Biofilter with Ventilation System Upgrade: Modernization of existing ventilation systems to optimize the performance of container biofilters. - Chimney Installation Over Container Biofilter: Installation of a chimney with the capability of extending the container for loading, ensuring ease of use and maintenance. - Biofilter Enclosure with Automated Ventilation System: Comprehensive enclosure of biofilters with an automated ventilation system, guaranteeing optimal working conditions. - Mechanical Exhaust Installation with Fan Connected to Biofilter: Implementation of mechanical exhaust systems with fans, enhancing the efficiency of the filtration process. Our solutions are designed for maximum efficiency, reliability, and ease of operation, while ensuring the highest level of operational safety.
Request for a quoteLMT SRL LUX
Italy
Serie LEVANTE WALL EXHAUST AXIAL FANS Wall-mounted exhaust fan with axial aspiration. Supplied with dowels for wall installation. Anti-static finish that provides protection from dust and dirt. The kit is available for installation on windows.
Request for a quoteLMT SRL LUX
Italy
Serie LPE HELICAL FANS FOR WALL The LPE serie’s fans, present constructive characteristics that allow both the utilization in the industrial applications and the installations in the tertiary environments (workshops, stores, breedings, glasshouses) where there is the real necessity of the employment of a fan with easy installation, low consumptions, and reduced noise pressure levels.
Request for a quoteLMT SRL LUX
Italy
DiAm line is ideal to intake or exhaust air through circular ducting in: public locals, offices, shops, bars, pools, laboratories, kitchens, toilets, workshops, restaurants etc. its compact steel structure, external rotor motor and centrifugal backward bladed impeller ensure: • easy installation; • flexible working by adjusting the rpm; • high efficiency; • sturdiness and reliability. rANGE This line consists of 6 models with diameters from 100 up to 315mm. cONSTrUcTiON • casing in weather proof steel sheet. • Steel sheet motor supports with airflow straighteners. • External rotor motor iP44 protection iSO B, speed adjustable by electronic speed regulator. • High efficiency backward blade impeller. • Terminal box in techno-polymer. TEcHNicAlSPEciFicATiONS • conveyed air: clean. • Temperature air: -20°c/ +50°c. • Voltage and frequency: mono phase 230V-50 Hz.
Request for a quoteLMT SRL LUX
Italy
Serie Etesi- wall exhaust fan. Built in axial fan with expulsion.
Request for a quoteLMT SRL LUX
Italy
Wall-mounted exhaust fan with axial aspiration. Supplied with dowels for wall installation. The kit is available for installation on windows AUTOMATIC OPENING/CLOSURE IN MYLAR
Request for a quoteLMT SRL LUX
Italy
DIRECT DRIVEN CENTRIFUGAL FANS EMPLOYMENT •Single inlet centrifugal fans. •Suitable for clean air and temperatures up to 60°C on machines and process-units. •10 models with air flow up to 4.000 m3/h and stastic pressure up to 180 mm H2O (1.800 Pa). •Steel housing painted impeller with forward curved blades wire mesh guard on inlet, outlet flange. • Enclosed and ventilated motor, three phase or single phase, IP55 protection, class F. BY REQUEST •Inlet spigot. •Model LCB AT. •Construction for air temperature up to 200° C.
Request for a quoteLMT SRL LUX
Italy
Thermal aerator for windows in translucent thermoplastic material with manual opening and closure system, with anti-insect net. It can be installed both on single and double glazing by simply turning the ring.
Request for a quoteLMT SRL LUX
Italy
Centrifugal wall-mounted exhaust fan. For holes of ø 100 mm. By removing the rubber ring the fan becomes suitable for holes of ø 80 mm or ø 90 mm. Supplied with dowels for wall installation. Brushless engine 70% energy saving. Threefold life. Anti-static finish that provides protection from dust and dirt. On request it is possible to have 12 Volt SELV exhaust fan that can be installed in ZONE 1
Request for a quoteResults for
Air conditioning- aeration- ventilation - Import exportNumber of results
66 ProductsCountries
Company type