Air cleaning systems - Import export

The Air Channel is used for cleaning wheat, barley, legumes and soybeans. The machine removes all kinds of light materials different from cereal grains in terms of aerodynamic properties: garbage, straw and spike fractures, various seeds, peeled shell and dust from the product by means of air flow. While the grain products are distributed homogeneously in the width of the Air Channel with the feeding table of the machine or a vibrating feeder, the light particles in it are conveyed to the upper outlet channel with the air flow coming from the bottom, and the cleaned product falls down and transferred into the system. ◾ The lighting created by the window enables the separation to be seen clearly and thus all kinds of air adjustments can be made. ◾ Manufactured in two types, this machine with vibro motor is usually used with a Peeler machine, the non-motorized one is used with a Garbage Purifier machine.

It performs the task of separating the light grains and shells of the unwanted foreign substances from the grain with the air flow. The grain is spread over the bottom by a vibrating feeder and conveyed towards the air duct. It is washed by the air flow opposite the movement of the grain, which enters the air channel with a homogeneous distribution. In the meantime, unwanted light grains are separated from the grain by moving with the air. Applications Fields ◾ Food Industry ◾ Flour Mills ◾ Semolina Mills ◾ Feed Mills ◾ Grain Cleaning Plants ◾ Corn Processing Plants ◾ Oil Factories ◾ Plywood Factories ◾ Grain Storage Silos ◾ Corn Mills ◾ Corn, barley, rye, oats, and so on grain processing plants

International patent registered for the CLEAN ROOM SYSTEM line (DIN EN ISO 14644-1) The CLEAN ROOM SYSTEM units are linear actuators with belt driven transmission and are specifically designed for Clean Room applications They are supplied with a certificate issued by the IPA Fraunhofer Institute in Stuttgard, which certifies compliance with class ISO 3 (DIN EN ISO 14644-1), or with class Fed Std 0.01 (FED 209 E). The system prevents particles from being discharged in the environment where the linear unit is located. This has been achieved by using a special straight seal that closes the horizontal opening where the slider moves, as well as by the operation of a 0.8 vacuum pump connected to 2 vacuum pipes located inside the drive head and the idle head. The system allows vacuum to be generated inside the unit so that any particles released when the system is operating are sucked towards the air filtration areas. Clean Room System linear actuators components are all made of...

With more than 35 years of air filtration experience, Mia Air offers you the latest filtration technology. Mia Air has been designed to provide fresh clean air by trapping 99.999 % of ultra-fine particles in the air. It has 11 m2 filtration area and 100 m2 effective room coverage. By using HEPA filtration, which traps extremely small particles, Mia Air can transform polluted air into clean air in seconds.

The OBC-25SC grain cleaner cleans any grain using 8 sieves and an aspiration system with a built-in cyclone. The installation of a cyclone at OBC-25SC made it possible to solve the problem of cleaning the air emitted by the OBC-25SC fan from dust and light impurities (small parts of leaves, grains, insects, sand, etc.). Previously, this was solved by installing a separate cyclone near the OBC-25S, conducting an air duct from the OBC-25S fan to it, and installing a clean air exhaust system from the cyclone. This led to significant additional costs and required a large free space. Now OBC-25SC with an integrated cyclone that successfully copes with cleaning a heap of grain, saves space and money. Additional advantages of the grain cleaning machine OBC-25SC: - high productivity with small sizes; - simple, durable design; - quick sieve change; - automatic cleaning of sieves with built-in brushes; - can be equipped with lifts, cyclone pipe and wheels.

The dust filter is located at the front of the blower, which allows efficient filtration of the air emitted. The filter is equipped with an air purge system that automatically cleans and keeps the filter screen unclogged. The filter area can be manufactured according to customer requirements and is equipped with different types of filters, suitable for different industries and conditions. A manual butterfly valve and a dust container are located under the machine to facilitate cleaning. It is suitable for food, chemical and plastic powders.

Breathing means life. The optrel swiss air breathing protection system brings clean breathing air into your environment and lets you breathe as freely as you can otherwise only enjoy outdoors in nature. Made of high-tech fabric, the half-mask is designed to provide excellent individual fit thanks to a freely adjustable headband. This concept eliminates the need for time-consuming fit tests, which are common with conventional halfmasks. The clean air is delivered via a Y-hose from a miniaturized blower system, which is conveniently attached to a carrying unit worn on the back. In this way, the user is supplied permanently via an "overpressure air system", which permanently protects the respiratory tract against contaminated air.

The AirExchange® 1500-T is one of the most powerful air cleaning systems on the market and has a timeless design. The device is equipped with a touch-control operating panel and a clear display that shows real-time measurements such as the CO2-level, Particulate matter (PM2.5), humidity and temperature. In addition, you can control the device from a distance with our convenient application, Equipped with an arsenal of defense mechanisms, the AirExchange® 1500-T air purifier eliminates viruses, bacteria, pollen, dust, pathogens, allergens and chemical compounds from the polluted ambient air with an effectiveness of more than 99.995%. The AirExchange® 1500-T has a cleaning capacity (Clean Air Delivery Rate - CADR) of up to 1500m³/ hour and is suitable for room sizes up to 200m². The system uses a double filter with a washable mesh filter,antibacterial filter, microbiological HEPA H14 filter, carbon filter and a photocatalytic TiO₂ (Titanium Dioxide) filter as natural ionizer.

The AirExchange 600-T is a powerful air cleaning system with a timeless design. The device is equipped with a clear, touch-control operating panel, where real-time measurements such as particle matter (PM 2.5), humidity and temperature are shown. In addition, you can control the device from a distance with the remote control or with the convenient phone-application. Equipped with an arsenal of defense mechanisms and our unique VORTEX-technology, the AirExchange 600-T air purifier eliminates viruses, bacteria, pollen, dust, pathogens, allergens and chemical compounds from the polluted ambient air with an effectiveness of more than 99.995%. The AirExchange® 600-T has a cleaning capacity (Clean Air Delivery Rate - CADR) of up to 600m³/hour and is suitable for room sizes up to 100m². The system uses a combined meshed, antibacterial pre-filter, microbiological HEPA H14 filter, carbon filter with activated carbon and a photocatalytic TiO₂ (Titanium Dioxide) filter as natural ionizer.

The AirExchange 750-T is a powerful air cleaning system with a timeless design. The device is equipped with a clear, touch-control operating panel, where real-time measurements such as particle matter (PM 2.5), humidity and temperature are shown. In addition, you can control the device from a distance with the remote control or with the convenient phone-application. Equipped with an arsenal of defense mechanisms and our unique VORTEX-technology, the AirExchange 750-T air purifier eliminates viruses, bacteria, pollen, dust, pathogens, allergens and chemical compounds from the polluted ambient air with an effectiveness of more than 99.995%. The AirExchange® 750-T has a cleaning capacity (Clean Air Delivery Rate - CADR) of up to 750m³/hour and is suitable for room sizes up to 120m². The system uses a combined meshed, antibacterial pre-filter, microbiological HEPA H14 filter, carbon filter with activated carbon and a photocatalytic TiO₂ (Titanium Dioxide) filter as natural ionizer.

The AirExchange® 150-T is an air cleaning system with a stylish design, specially designed for smaller offices, treatment rooms or bedrooms. The device is equipped with a bright, touch-control panel, with which you can easily operate the device. Due to its unique filter combination, the AirExchange® 150-T eliminates viruses, bacteria, pollen, dust, pathogens, allergens and chemical compounds from the polluted ambient air with an effectiveness of more than 99.99%. The AirExchange® 150-T has a cleaning capacity (Clean Air Delivery Rate - CADR) of up to 150m³/ hour and is suitable for room sizes up to 40m². The system uses a a combined meshed, antibacterial pre-filter, microbiological HEPA H13 filter and a carbon filter with activated carbon. The operating lifetime of the filter is around 4300 hours (depending on the amount of environmental pollution).

ceiling filtration at spray booth, standard industrial spraying system, air clean system pre-filtration, flow decentralization at ventilation system. Filter material and features: Elevated density polyester fiber with combed mesh via hot wind, counter flow side reinfored by net or cloth, full glued. Certified EN779 Anti-humidity: 100% r.F. Temperature resistance: 80℃/176℉ Non-flammablility, self-extinguishing conform to DIN53438 F1 Filter particles: ≥1μm Served in roll or piece Options available: Filter Media F5/M5, 20m x 1.6m x 20mm Filter Media F5/M5, 14m x 1.6m x 20mm

The AirExchange® 150-T is an air cleaning system with a stylish design, specially designed for smaller offices, treatment rooms or bedrooms. The device is equipped with a bright, touch-control panel, with which you can easily operate the device. Due to its unique filter combination, the AirExchange® 150-T eliminates viruses, bacteria, pollen, dust, pathogens, allergens and chemical compounds from the polluted ambient air with an effectiveness of more than 99.99%. The AirExchange® 150-T has a cleaning capacity (Clean Air Delivery Rate - CADR) of up to 150m³/ hour and is suitable for room sizes up to 40m². The system uses a a combined meshed, antibacterial pre-filter, microbiological HEPA H13 filter and a carbon filter with activated carbon. The operating lifetime of the filter is around 4300 hours (depending on the amount of environmental pollution).

The AirExchange 600-T is a powerful air cleaning system with a timeless design. The device is equipped with a clear, touch-control operating panel, where real-time measurements such as particle matter (PM 2.5), humidity and temperature are shown. In addition, you can control the device from a distance with the remote control or with the convenient phone-application. Equipped with an arsenal of defense mechanisms and our unique VORTEX-technology, the AirExchange 600-T air purifier eliminates viruses, bacteria, pollen, dust, pathogens, allergens and chemical compounds from the polluted ambient air with an effectiveness of more than 99.995%. The AirExchange® 600-T has a cleaning capacity (Clean Air Delivery Rate - CADR) of up to 600m³/hour and is suitable for room sizes up to 100m². The system uses a combined meshed, antibacterial pre-filter, microbiological HEPA H14 filter, carbon filter with activated carbon and a photocatalytic TiO₂ (Titanium Dioxide) filter as natural ionizer.

The AirExchange 750-T is a powerful air cleaning system with a timeless design. The device is equipped with a clear, touch-control operating panel, where real-time measurements such as particle matter (PM 2.5), humidity and temperature are shown. In addition, you can control the device from a distance with the remote control or with the convenient phone-application. Equipped with an arsenal of defense mechanisms and our unique VORTEX-technology, the AirExchange 750-T air purifier eliminates viruses, bacteria, pollen, dust, pathogens, allergens and chemical compounds from the polluted ambient air with an effectiveness of more than 99.995%. The AirExchange® 750-T has a cleaning capacity (Clean Air Delivery Rate - CADR) of up to 750m³/hour and is suitable for room sizes up to 120m². The system uses a combined meshed, antibacterial pre-filter, microbiological HEPA H14 filter, carbon filter with activated carbon and a photocatalytic TiO₂ (Titanium Dioxide) filter as natural ionizer.

In many incineration and industrial plants in various industries as well as in the municipal sector, dust emissions are produced during production processes. These emissions must be purified before they are released into the atmosphere. The dusts can be sticky, greasy, wet, dry or combustible and have different particle sizes. In general, they are between 0,1 and 1000 μm in size. Dust collection systems physically filter these dusts out of the exhaust air. WesselUmwelttechnik specialises in various methods of exhaust air cleaning, including industrial dust collector systems, to safely comply with legal requirements, e.g. the German TA Luft. In addition to dry filtering, the product range includes wet separators. This way, even humid and hot exhaust air as well as agglomerating dusts can be treated by the Wessel systems. The various exhaust air purification technologies allow the use of dust collecting systems in a wide variety of industries.

Biological exhaust air cleaning is always required if exhaust air needs to be purified of volatile organic components the socalled VOCs or odorous substances. The demand for biological procedures has increased in recent years. On the one hand, biological exhaust air cleaning does not generate any climaterelevant greenhouse gases. On the other hand, it meets all legal requirements for clean gas values. With over 200 biological exhaust air cleaning processes installed, Wessel has comprehensive practical knowhow and is the technology leader in the field of biological exhaust air cleaning. The biological exhaust air cleaning systems have been continuously optimised and further developed by WesselUmwelttechnik for decades. The modern cleaning systems from WesselUmwelttechnik work efficiently. Thanks to the continuous monitoring of the plant parameters, they require only a minimum of operating effort.

For its exhaust gas purification systems, Venjakob Umwelttechnik offers heat exchanger systems for utilizing the waste heat. These are characterized by: We build complete heat exchanger systems for heating water, steam, air, and gas or heat transfer fluid. The residual or excess energy contained in the clean gases of the Venjakob exhaust air cleaning systems often has sufficient potential to effectively support the actual production process, the building heater or other energy consumers. Whether as an individual system for heat transfer fluid, warm and hot water, hot air, and vapor, or combined as a downstream system solution for an exhaust air purification system - the planning, construction and production of the plant are done on an individual basis.

Details wall-mounted extraction with deflector profiles to increase filtering efficiency; easily removable for fast maintenance inside machine main structure formed by self-supporting galvanized panels with non-cutting edges lv control panel wired with flame-retardant cable atex lighting extractor with belt traction system high efficiency, antistatic, aluminum coated polyester filtering cartridges automatic compressed air filter cleaning system by detecting clogging of cartridges compressed air storage tank inside machine internal dust collection drawers deflectors inside machine to facilitate air conveying and dust collection in drawers Optional: dust extraction station with insulated paneling and, if necessary, wall-mounted filtration for air introduction

Details extraction using horizontal work surface, scratchproof thanks to felt cladding main structure formed by self-supporting galvanized panels with non-cutting edges low control panel wired with flame-retardant cable extractor with belt traction system high efficiency, antistatic, aluminum coated polyester filtering cartridge compressed air filter cleaning system with manual operation compressed air storage tank inside machine internal dust collection drawers deflectors inside machine to facilitate air conveying and dust collection in drawers rear vertical walls Optional: vertical wall behind extractor and/or which can be tilted rubber wheels for easy movement

The adsorption system (AD) from Venjakob Umwelttechnik serves to concentrate exhaust air flows containing low concentrations of pollutants, and is particularly suitable for removing extremely low to medium concentrations of solvent-based pollutants (VOCs). This machine is characterized by: During the adsorption process, the pollutants are physically retained on the surface of a solid material (e.g. activated carbon, zeolite). The pollutants are then removed /desorbed from the zeolite by means of a small, hot stream of air. Afterwards, the flow of exhaust air from the desorption process is cleaned by means of an exhaust air cleaning system (TI, RTO, CTO). By reducing the volume and by increasing the concentration, the operating costs of the downstream exhaust gas purification system can be kept very low and make autothermal operation possible among other things The rotor is mounted vertically on a shaft with bearing and rotated slowly in the air flow. During rotation, the adsorption and desorption take place simultaneously in separate chambers with cooling on a hydrophobic (water-repellent) incombustible zeolite material. For tough applications, versions can be provided with a removable wear layer and / or higher temperatures of up to 300 ° C for desorption. Two containers are operated alternately. While one of the containers is adsorbing, the other container can be desorbed The adsorption process can be used for smoothing pollutant concentration peaks. If pollutant peaks occur during a process that could lead to a potentially explosive mixture (> 25% lower explosion limit), they cannot be introduced into an incinerator. However, the pollutants may be temporarily stored in an adsorber and then be released during the desorption phase. In certain situations, the installation of an additional fixed bed adsorber (molecular sieve) may further enhance the process (safety, operating costs).

In order to achieve the desired quality in wet paint application, the main standards that must be fulfilled in the facilities are appropriate filtering and clean air system, suitable air conditioning and appropriate lighting. The electrical equipment in the painting facility must be suitable for the explosion document. Filtration systems must comply with the regulations of the Ministry of Environment waste gas emission values.

Our cleaning solutions respond to the needs of packaging lines, especially in demanding environments where hygiene requirements are high. The air rinsers and bottle cleaning systems present the following benefits: - Low cost: as a result of its simplicity of operation and efficiency, presenting virtually no maintenance. - Compact: it takes little extra space thanks to its small dimensions as it can be assembled with the bottle unscrambler keeping a unique monobloc for sorting and cleaning the bottles. - Ergonomic: simple and intuitive operation. - Versatile: adaptable to a wide range of geometries and materials. - Effective: proven effectiveness with a great variety of bottles thanks to a simple but infallible turning and blowing system. - Configurable: accessories available to achieve the level of hygiene required.

This product is designed to perform fitness activities. You can develop your leg muscles by using this product. At the same time, you can improve blood circulation, maintain a healthy cardiovascular condition, and increase overall body flexibility by exercising with this product. With this product, you can produce an organic solution for outdoor sports fields. Along with other RobiFit products you can create customized assemblies to your expectations.

High-quality compressed air is very important for many industries, it has a vital role in breathing air applications. Mikropor breathing air purifiers are designed to eliminate hazardous substances in the air conforming to related standards. (Mikropor breathing air purifiers are designed to protection against a range of contaminants that may be present in a compressed air fed breathing air system.) The atmospheric air that we breathe is composed of approximately 78 percent nitrogen, 21 percent oxygen, 1 percent argon, and many other trace components. Standards including the allowable limits of the specification for each component for breathing air. Mikropor production breathing air purifiers comply with international standards.

1200i PRO is a Medical Grade Air Purifier with a Clean Air Delivery Rate of 1200 m3/h. 1200i PRO combines the most advanced 4-stage filtration technology currently available on the market. Medical-grade H13 HEPA NANO filters remove 99.97% of malicious particles from the air providing safe environments for both business and leisure. High efficiency in killing viruses (ie. Coronavirus) and bacteria, effective in removing unpleasant odours are ensured by the implementation of multiple filtering systems. 1200i PRO is an outstanding air purifier designed entirely for the comfort and health of you, your customers, your patients and your employees.

Exhaust air purification and heat recovery systems are generally not standard applications, even if individual assemblies are now modular. We have made it our goal to offer our customers the best solution for their task. To do this, we take a step back with our customers in order to gain an overview of the whole. Together we look at how the exhaust air is generated and try to start our concepts right at the point of origin. Only then can we decide which exhaust air system is the most economical when considering the total cost of ownership and compliance with the limit values. Should an extended consideration be necessary, we can accompany you from basic to authority to detail engineering. In addition, it is not uncommon for pilot tests to be offered, which lead to the later real scale of the systems by means of scaleup. With these consulting and engineering services, we offer you a manufacturerindependent package with which you can make the right decision for your company.

Biological exhaust air cleaning is used whenever exhaust air has to be cleaned from volatile organic compounds (VOCs) and odours. Biofilters play a major role in this process. The polluted exhaust air is passed through a filter medium where the VOCs and odours are separated. Normally, this medium is an organic carrier material where microorganisms are grown on. They convert the VOCs and odours into noncritical components by means of their metabolism. Especially regarding the removal of odorous substances, biofilters are a very efficient and comparatively inexpensive way of biofiltration with an efficiency of up to 99 %. BIOCATbiofilters have a high degree of efficiency in a wide range of applications, even for exhaust air components that are difficult to dissolve in water.

The Potok® air purifiers work on the basis of ultraviolet technologies which disinfect air by 99.9%. Recommended room size up to 185 m2, room height - 2.4 m. Protects against viruses: makes the air in your home and office safe. The air is disinfected inside the device using ultraviolet lamp radiation. Our antibacterial UV lamps' special glass and design features provide zero ozone emission, making it safe to use the air purifiers for people, animals, and plants. Filter of a F5-Class: captures particles from 1 micron, including allergens, pollen, spores of fungi and mold, bacteria, dust and animal hair We are a member of the International Ultraviolet Association (IUVA) and actively participate in its activities, research and developments. The production capacity ensures a daily production rate of 3000 air purifiers.