Adaptor - Import export

Adaptor or Breakout for use with CableJoG 128,256,512 & 1024 and RibbonJoG cabel testers.Standard Female 'd' type connectors in sizes 9,15,25,37 and 50 ways.Requires standard 64way ribbon cable for connection to CableJoG or RibbonJoG testers.

Used to join delivery tubes together. Thread 1/8” BSP Female/Female Part No. S22

Adaptor Couplings, sometimes referred to as reducer couplings, are designed to connect unadopted drainage pipes with different outside diameters – connecting larger drainage pipes to smaller drainage pipes and vice versa.

4 port USB adapter 5V 4900mA EU plug

Adapters and adapter tools in various sizes and designs. A surface design with corrugation or protruding points is possible. We make the corresponding design in accordance with your drawing.

With the thread adapter made of high-quality stainless steel 1.4301 (304) a pump, a drain cock or any other connection with thread G 2" (Whitworth pipe thread) can be screwed onto a container with G 1 1/2" thread. The thread adapter adapts and thus compensates for different thread shapes. The drum adapter ensures that decanting is liquid-tight; a seal made of ePTFE reliably seals the connection. The thread adapter made of stainless steel is electrically conductive and highly chemically resistant. It can therefore be used for filling solvents and other flammable liquids (e.g. alcohols, petrol, diesel etc.) as well as for weak alkalis and acids.

Pin for attaching display panels to holders with punched strips. • Pin for attaching display panels to holders with punched strip • Suitable for use with SHERPA and FUNCTION display panels

Pressure containing equipment Capacity : up to 21"3/4 API certifications Lainé Mécanique designs and manufactures with a high reactivity. Short production deadline

Enlarger made of polyamide for the enlargement of threaded or clearance holes to larger thread sizes. Features: — Temperature range -30 °C / + 100 °C — Protection grade dependent on the combination with other components

Enlarger made of nickel-plated brass for the enlargement of threaded or clearance holes to larger thread sizes. Features: — Temperature range -60 °C / + 200 °C — Protection grade dependent on the combination with other components

Reduction made of polyamide for the reduction of threaded or clearance holes to smaller thread sizes. Features: — Temperature range -40 °C / + 100 °C — Protection grade dependent on the combination with other components

Reduction made of nickel-plated brass for the reduction of threaded or clearance holes to smaller thread sizes. Features: — Temperature range -60 °C / + 200 °C — Protection grade dependent on the combination with other components

Product Name: Hydraulic adpater /Tube connector Material: carbon steel/Stainless steel/ brass Size: different size available Packing: Carton+Wooden case suit for sea shipping. Load port: Ningbo/Shanghai/Shenzhen.

Product Name: Hydraulic adpater /Tube connector Material: carbon steel/Stainless steel/ brass Size: different size available Packing: Carton+Wooden case suit for sea shipping. Load port: Ningbo/Shanghai/Shenzhen

Product Name: Hydraulic adpater /Tube connector Material: carbon steel/Stainless steel/ brass Size: different size available Packing: Carton+Wooden case suit for sea shipping. Load port: Ningbo/Shanghai/Shenzhen.

With the Lascar PSU USB-EU Adapter you are assured of a stable 5V DC to 1A via a USB cable (not included). This adapter is specially designed for use with various Lascar products. For the EL-GFX data logger, you can connect the PSU USB-EU via the supplied USB A to Micro B cable (USB A-MICRO B Cable) to power the logger. With the EL-WiFi and EL-BT data loggers you can also connect the PSU USB-EU via the supplied USB A to Micro B cable (USB A-MICRO B Cable) to fully charge or connect the battery of the device. close to the current.

Discover our range of Saws and adaptators for combine harvester and many other combine harvester parts on www.landa-partscenter.com. Landa offers a range of agricultural parts for forage harvesters, combine harvesters, balers, mower-conditioners, windrowers and tedders. We develop wear parts for harvesting machines that are equivalent to original manufacturer parts, in partnership with industrial companies specialising in the fields of metallurgy (assembly, machining, forming). Our range of spare parts is multi-brand: CLAAS, JOHN DEERE, NEW HOLLAND, KHUN, KRONE, FENDT etc. We work with well-known brands such as: GATES, OPTIBELT, NSK, NTN, TIMKEN, SCHAEFFLER, IWIS, DIAMOND, DONALSON, FLEETGUARD, MANN FILTER, SCHUMACHER, etc.

This mounting adapter from Therma was developed to match the friction thermocouple MST-20347. Mounting helps conduct the friction sensor securely and with uniform pressure on the brake disc, facilitating the most precise measurement results. The mounting adapter for MST-20347 is M12x1 and becomes delivered with locknut.

Universal thread adapter for nearly all drums and other containers with opening of 48–75 mm in diameter, regardless of the respective thread. The thread adapter can be mounted quickly and easily with clamping screws and can be used for different container openings. With G2" connector thread for Bürkle drum screw connections and pumps with immersion tube diameter up to 32 mm. The container connectors make decanting even easier and safer with their more secure connection to barrels. The connectors secure the pump in the barrel, enable a vertical position change and allow the required air exchange.

Wireless, multifunctional and multi-output travel adapter with integrated powerbank of 10,000 mAh charging capacity. Elegant white design with large branding surface. Wireless charging function with magsafe technology, with dual Type C input/output, and USB outputs. Two integrated output cables with Type C and 2-in-1 connectors (Micro USB and Lightning). Simultaneous use for all functions, with wall plug adapters for USA, Europe, Asia, UK and Australia. Presented in an attractive kraft design box. Instruction manual available in English and Spanish. The capacities shown in all our external auxiliary batteries are real, all of them incorporating non-recycled, grade A batteries, with a service life of at least 500 charging cycles, and complying with CE regulations. In addition, they are manufactured according RoHS standards, and in compliance with the following safety requirements: Power bank overcharge protection system.

The camera mounting adapter can be used on all Rolatube masts and tripods. It provides a 100mm (4”) spigot and incorporates a standard 6mm (0.25″) Whitworth screw for direct interface with a camera. System 100 masts System 75 masts System 50 masts System 50 tripods

Available for single and double tube masts Easy & quick attachment to the tripod head Secure clamp for the mast The Mast Support Adapter enables a Rolatube System 50 tripod to be used as a support for either a System 75 or 100 mast where conditions allow. This is useful if ground pegs cannot be used. Quick and secure attachment to the tripod head is provided via a strong clamp to support the mast. Removes the need for guy ropes where conditions allow; Provides additional support during mast deployment, thereby reducing the number of personnel required. System 75 single tube mast, System 75 double tube mast, System 100 mast.

The CN-8032-L Profinet network adapter supports standard Profinet IO Device Communication. The adapter supports no MRP redundancy, and no ring network redundancy. And it supports RT real-time communication mode, with its RT real-time communication minimum period of 3ms. The adapter supports a maximum input of 1440 bytes, a maximum output of 1440 bytes, and the number of the extended IO modules it supports is 32.

plastic spring adapter part material: black delrin POM size: diameter 100 mm, height 24.50 mm tolerance according to ISO 2768-m manufactured by CNC lath turning Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

The CN-8034 Ethernet/IP I/O module supports standard Ethernet/IP protocol access. The adapter supports a Max. input of 504 bytes and a Max. output of 504 bytes. It supports 32 pcs of extended IO modules. It has been tested successfully with PLC such as AB(1769-L16ER-BB1B), Delta (AS228T-A), Omron (NX1P2-9024DT) and other controllers.

PARTS FOR MOUNTING AND SERVICING HYDRAULIC SYSTEMS Locked flange adapter for PE pipes and hoses BMAIN CHARACTERISTICS - Made of ductile cast iron EN-GJS 400 - Blue epoxy anti-corrosion coating - Pressure rating: 10 or 16 bar - For PE pipes - ISO PN10 and PN16 drilled flanges up to DN150, from DN200, ISO PN10 or PN16 drilling to be specified. or PN16 drilling to be specified - Complies with EN 545 - A.C.S. certified product

Aluminum Thread Adapters are precision-crafted components made from high-quality aluminum alloys. The adapters are processed using CNC Lathe Machining, ensuring accurate and reliable performance. Common aluminum alloys used for this product include 6061-T6 and 7075-T6, which offer excellent strength and corrosion resistance. The Aluminum Thread Adapters are finished with a tough, matte-textured anodized layer, providing a durable and aesthetically pleasing appearance. The anodized finish also enhances the overall durability of the adapters, protecting them from wear and tear while in use. These adapters are designed for a wide range of applications, including but not limited to piping systems, fluid handling equipment, and machinery components. Their threaded connections allow for secure and reliable fastening between various components, ensuring smooth operation and efficient performance. Ming Xiao Mfg., based in China, is a trusted supplier of customized aluminum components.

China Source CNC Turned Stainless Steel Parts Customize Services. Ming Xiao Manufacturing Co., Ltd engaged in Turning Parts manufacturing more than 20 years,after years of upgrading, it has now been equipped more than 100 sets various processing machines, some are advanced precision processing equipment. As a professional turning parts supplier from China,we can custom producing all kinds Carbon & Stainless steel turning parts,Copper & Brass turning parts,Aluminum Turning Parts & Machined parts. Such as tube coupling, hose coupling, shaft,Axis,pipe joint parts,hose connectors & transition connectors,copper machined tube, flange,bushing, Sleeve,knighthead,pedestal,Piston Rod,insert long pin, Dowel Pin,Drive Pin & Rod,ball head bolt,long rod machined parts,long thread tube parts,nonstandard thread bolt & nut,Extension Rod, etc. We custom metal turning Parts for all industries,welcome contact us to discuss about your projects. sales@mxmparts.com

Adaptor or Breakout for use with CableJoG 256,512 & 1024 and Limited use with CableJoG 128 & RibbonJoG cabel testers (68way cant be tested).Standard 1.27mm x 1.27mm pitch connectors in sizes 6,8,10,12,14,16,20,24,26,30,36,40,50,60 and 68 ways.Requires standard 64way ribbon cable for connection to CableJoG or RibbonJoG testers and standard 34way ribbon cable for testing the 68way connector.