Ac motors - Import export

Application Motors in explosion-proof design as drive for shearer loaders in coal mines.

This is a plastic cavity for CNC milling.

These parts were made by stainless steel and brass. The parts as the covers used for the machine.

2-phase stepper motors Our 2-phase stepper motors are reliable and low-cost drives with a long service life. They are available in different sizes and types of power output, are continuously developed and are thus suitable for a variety of applications. AC servo motors The AC servo motors meet the highest demands regarding dynamics and accuracy and are used if dynamic, exact positioning or smooth running characteristics are required. The different types of power output and sizes cover the most diverse requirements. The benefits at a glance Highly dynamic High efficiency Long service life

High feeding accuracy, quick cycles and simple operation Servo feeding in compact design with maintenancefree AC servo motor Fits just about any press +/ 0,025 mm feeding accuracy through incremental servo encoder Lightweight rollers with special hard chrome layer Mechanical pilot release Sturdy steel plate bolton design Height adjustment via threaded spindle Catenary rolls and edge guides at machine entrance Stock guides at exit Highperformance control with good functionality; with remote control for setup on 3,5 m cablel 24 V DC proximity switch adjustable piloting lever to be mounted to press pneumatic pilot release

The robot stretch wrapping machine model. FP EASY ECO, battery-powered and automatic steering with overrunning side wheel (CE). Turning around the pallet automatically performs the film wrapping or network. Equipped with manual steering for driving forward and backward buttons, traction batteries maintenance-free gel, current transformer 24 V DC - 220 V AC, built-in charger, electric motors, three-phase inverter driving wheel height adjustment, front bumper security.Place the machine near the load to be wrapped Hook the film or the net to the load Select the wrapping program Press the start button The machine rotating around the load makes the winding and stops at end of cycle Cut the film manually Please note that the machine has a driving wheel side wheel to be placed in contact with the load, if the load surface or irregular shape must assess the suitability.

AViTEQ Unbalance motors can be used as drives for almost each case of application in the vibration feeder technology and over all industries. Unbalanced motors are the prefered drive system, in particular if it depends on high throughput of bulk material. Advantages and benefits available as standard for explosion proofed ATEX zones 21+22 available as standard for CSA-apllication "Class 1 + 2" available as standard with thermistor operationally safe in continuous employment high level of performance with compact dimensions efficiency latest state-of-the-art of technology and production conformity with all EC Guidelines which affect the drives available for 60 Hz power systems and other mains voltages Construction and operation mode The AViTEQ unbalance motor is a three-phase ac induction motor, on which weights are eccentrically attached at the ends of the running shaft; so-called eccentric weights (flyweights). Centrifugal forces are generated with rotating waves. The value of these

Our small and industrial carbon brushes are used in many different power- and signal-transmission applications. How can we help you? The range of different dimensions and versions of small and industrial brushes is enormous: It's no wonder the quality products from MACK are used in many electrical tools, small motors, AC and DC motors, in the automotive field, and many other applications. With higher currents, such as in wind turbines and grounding systems, our metal graphite grades ensure optimum transmission. Our silver graphite carbon brushes are also used in marine shaft grounding and in signal- and data-transmission systems, for example, in tachogenerators. Do you want to make ordering small and industrial carbon brushes as fast and uncomplicated as possible? Then use our online MACK carbon brush configurator. With just a few clicks, your enquiry or order reaches us – and then is quickly sent on the way to you.

The Swing Carousel consists of a rotating structure rising along a central column and supporting three rows of swinging chairs; 12 double seat chairs are located on the inner row for accommodation of one adult and one child. All decorative panels are made out of fibreglass with galvanized-steel frame. All decoration are hand made and all painting one by one hand-brush executed. Lighting is permanently mounted on fibreglass elements. The swinging chairs and their supporting chains are made by stainless steel and fibreglass shells. The covering roof is made up by a flame-retardant canvas with decorative fibreglass “flat”cover. The rotation is made by one self-braking AC motors on top and one AC motor at bottom of central column. All motors are controlled by frequency drives and the whole system is operated by PLC’s.

The Swing Carousel consists of a rotating structure rising along a central column and supporting three rows of swinging chairs; 16 double seat chairs are located on the inner row for accommodation of one adult and one child. The whole structure is hot-dip galvanised, with exception of the central column and is covered by hand painted decorative fibreglass panels on which lighting is fixed. The swinging chairs and their supporting chains are made by stainless steel. The covering roof is made up by a flame-retardant canvas. The rotation is made by two self-braking AC motors on top and one AC motor at bottom of central column. All motors are controlled by frequency drives and the whole system is operated by PLCs.

The Swing Carousel consists of a rotating structure supporting one row of swinging chairs. The whole structure is hot-dip galvanised, with exception of the central column and is covered by hand painted decorative fibreglass panels on which lighting is fixed. The swinging chairs and their supporting chains are made by stainless steel while the seat is made out of fiberglass. The covering roof is made up by a flame-retardant canvas. The rotation is made by one self-braking AC motor.

The Musik-Express ride consists of a circular development track with depressions and three cat backs. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twenty cars run along the rail and are connected to a central rotor by radial sweeps. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. All decorative panels are coated with aluminium sheet. Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The cars are moved by 5 self-braking AC motors fixed on the ends of the radial sweeps and controlled by Frequency Drive.

The Musik-Express ride consists of a circular development track with depressions and three cat backs. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twelve cars run along the rail and are connected to a central rotor by radial sweeps. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. All decorative panels are coated with aluminium sheet. Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The cars are moved by 3 self-braking AC motors fixed on the ends of the radial sweeps and controlled by Frequency Drive.

The Swing Carousel consists of a rotating structure rising along a central column and supporting two rows of swinging chairs for accommodation of 1 passenger each. Double seats is also possible, to accommodate one adult and one child. All decorative panels are made out of fibreglass/alluminium with galvanized-steel frame. All decoration are hand made and all painting one by one hand-brush executed. Lighting is permanently mounted on decorative elements. The swinging chairs and their supporting chains are made by stainless steel and fibreglass shells. The covering roof consist of decorative fiberglass globe. The rotation is made by one self-braking AC motors and lifting by two hydraulic pistons.

The Swing Carousel consists of a rotating structure rising along a central column and supporting two rows of swinging chairs; 10 single adult chairs are located on the outer row for accommodation of one adult. Double seats can also be installed on place of one adult and one child seats. The whole structure is hot-dip galvanised, with exception of the central column and is covered by hand painted decorative fibreglass panels on which lighting is fixed. The swinging chairs and their supporting chains are made by stainless steel while the seat is made out of fiberglass. The covering roof is made up by a flame-retardant canvas. The rotation is made by one self-braking AC motor for a maximum rotation speed of 8 rpm, which is controlled by frequency drive.

The dark-ride consist of enclosed pavilion where automatically operated vehicles (multi-passengers) runs along apposite rail across "scaring" scene with animations and sound effects. Each car have a capacity of 4 passengers and is equipped with restraint lap-bars to hold passengers inside vehicles during operation. This Dark-Ride vehicle ìs designed to be operated on a single-level ride with flat surface.The vehicle consist of a painted steel chassis, surrounded by bumper profile, and painted fiberglass body. The driving unit consist of AC gear-motor connected to driving wheels "cllmbing" along the track. The electric motor is controlled by Frequency Drive programmed with pre-set operational speeds. The vehicle is supported by fours swivel castor wheels.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round, Liberty style. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Double Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The two overlapped floors structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The second floor is accessible through two staircases. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

The right drive solution for every challenge: The SN3B gear series is one of the most flexible and universally usable gear series form Ruhrgetriebe. The single stage gearboxes are available with a solid or hollow shaft - with or without flange. Available are different gear- and shaft positions and a large number of different motors. SN3B-Gear types: SN3B / SN3B4 / SN3BFH / SN3BH / SN3BHFL — Motor types: AC (230/400V) and DC (180/200V) — Shaft design: Solid (SN3B /SN3B4) or hollow shaft (SN3BFH /SN3BH / SN3BHFL) — Ratios: 5; 7; 11; 12; 15; 17; 20; 24; 30; 32; 38; 50; 56; 75 — Power: 120-250W — permissible torques: 11-17 Nm — effectiv torques: 3,2-23 Nm — Additional options: brake motors, UL/CSA-certification, thermal protection, encoder Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

The right drive solution for every challenge: The SN3F gear series impresses with its compact dimensions and flexible application range. The flange-gear is available with solid shaft as well as with hollow shaft. The geared motors are available as three-phase or direct current versions and can be equipped with brakes or pulse generators (on request). SN3F-Gear types: SN3F / SN3FH / SN3FL / SN3FLH — Motor types: AC (230/400V) and DC (180/200V) — Shaft design: Solid (SN3F / SN3FL) or hollow shaft (SN3FH / SN3FLH) — Ratios: 5; 7; 11; 12; 15; 17; 20; 24; 30; 32; 38; 50; 56; 75 — Power: 120-250W — permissible torques: 11-17 Nm — effectiv torques: 3,2-23 Nm — Additional options: brake motors, UL/CSA-certification, thermal protection, encoder Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

The right drive solution for every challenge: The SN3VH-gearmotors impresses with its compact dimensions and flexible application range. The geared motors are available as three-phase or direct current versions and can be equipped with brakes or pulse generators (on request). SN3VH-gear types: SN3VH — Motor types: AC (230/400V) and DC (180/200V) — Shaft design: Ø14 Hollow shaft — Ratios: 5; 7; 11; 15; 17; 20; 24; 30; 32; 38; 56; 75 — Power: 120-250W — permissible torques: 11-17 Nm — effectiv torques: 3,2-23 Nm — Additional options: brake motors, UL/CSA-certification, thermal protection, encoder Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

— Feeder ideal for difficult flowing, sticky or floodable bulk ingredients at low feed rates — Separate screw and agitator motors (3 phase AC gear motors), except models MT and DDSR20 — Interchangeable screws and screw tubes allowing quick adjustment to changing ingredients and feed rates Power range 1-489 dm³/h

— Stainless steel hopper with stirring — agitator for consistent screw filling and mass flow of ingredient — Separate screw and agitator motors (3 phase AC gear motors), — except model DSR28 — Interchangeable screws and screw tubes allowing quick adjustment to changing ingredients and feed rates Power range 50-7088 dm³/h