Results for
FRIEDRICH AUGUST PICARD GMBH & CO. KG
Germany
We offer a wide variety of grades with various dimensions and grain sizes of abrasive belts that are perfectly suited to your application and processes. We will be happy to advise you to find the right sanding belts for you.
Request for a quoteRHODIUS ABRASIVES GMBH
Germany
Flexible continuous-feed belt for hand-guided belt grinders. • Closed coating for high material abrasion • Tear-resistant X-cloth for long lifetime coupled with flexibility • Safe through three full-face fabric layers
RHODIUS ABRASIVES GMBH
Germany
Special technologies: High-performance ceramic grain tools. For industrial high-throughput grinding applications. Continuous-feed belt with ceramic grain for stationary belt grinders. • Bond from synthetic resin with abrasive grain fillers for cooler grinding • Closed coating for high stock removal performance on steel and stainless steel • Tear-resistant X-polyester fabric, waterproof for a long lifetime
RHODIUS ABRASIVES GMBH
Germany
Continuous-feed belt with zirconium for stationary belt grinders. • Zirconium closed coating for high material abrasion on steel and stainless steel • Tear-resistant Y-polyester fabric, waterproof for long lifetime • Safe through three full-face fabric layers
RHODIUS ABRASIVES GMBH
Germany
Special technologies: High-performance ceramic grain tools. For industrial high-throughput grinding applications. Flexible continuous-feed belt with ceramic grain for hand-guided belt grinders. • Bond made from synthetic resin enriched with abrasive grains for a cooler cut • Closed coating for high stock removal performance on steel and stainless steel • Flexible, tear-resistant cotton T-fabric for a long lifetime
RHODIUS ABRASIVES GMBH
Germany
Non-woven continuous-feed belt for hand-guided belt grinders. • X-Flex, very flexible • No delamination • Uniform surface finish
RHODIUS ABRASIVES GMBH
Germany
Continuous-feed belt for belt grinders. • Aluminium oxide closed coating for high material abrasion on steel and wood • Tear-resistant X-cloth for long lifetime • Safe through three full-face fabric layers
RHODIUS ABRASIVES GMBH
Germany
Continuous-feed belt with standard aluminium oxide for stationary belt grinders. • Aluminium oxide closed coating for high material abrasion on steel • Tear-resistant Y-polyester fabric, waterproof for long lifetime • Safe through three full-face fabric layers
FTK FÖRDERBAND TECHNIK KILIAN GMBH
Germany
FTK Förderband Technik Kilian GmbH has a wide range of elevator belts for all applications. The range includes the following belt types anti static, abrasion resistant, high temperature, oil resistant and flame retardant, and steel mesh belts for the harshest environments. The belts are made to customer requirements.
Request for a quoteIMM MASCHINENBAU GMBH
Germany
Heavy duty belt sanding and polishing jack for industrial applications. Compact double ended design. Floor standing pedestal. Rapid belt tensioning and tracking. Also for alumimun polishing.
Request for a quoteIMM MASCHINENBAU GMBH
Germany
With frequency converter for variabel cutting speed setting. For belt sanding steel, titanium and other metals.
Request for a quoteIMM MASCHINENBAU GMBH
Germany
Rigid machine for heavy duty belt grinding. The machine can be adjusted for horizontal or vertical position. Various options include: Dust extraction, chamfering device, angle guide roller, longitudinal stop.
Request for a quoteIMM MASCHINENBAU GMBH
Germany
The 72711 belt sander offers all benefits of the 72780 series but with only one side. It is made for heavy duty applications. For sitting or standing operation. Variable cutting speeds from 900 to 2,800 Rpm. Optionally with frequency converter.
Request for a quoteTYROLIT - SCHLEIFMITTELWERKE SWAROVSKI AG & CO K.G
Austria
Tyrolit's specialists continuously develop and improve the abrasive belt assortment for both hand-held machines and stationary belt grinders. Each belt is perfectly matched to the machine and task, considering the material, workpiece shape, and application. Tyrolit offers individual advice, especially in the industrial sector. Optimizing the grinding process for sustainable success is crucial, whether for metalworking companies, workshops, or construction sites. Every Tyrolit abrasive belt excels with specific properties. Zirconium belts are ideal for machining steel and stainless steel, featuring hard-wearing fabric and an active coolant that reduces heat generation. CERABOND technology belts boast a self-sharpening effect, ensuring a uniform surface finish throughout their lifetime and reducing operator workload due to less required pressure.
Request for a quoteFRIEDRICH AUGUST PICARD GMBH & CO. KG
Germany
The contact wheel FAPI-PUS OPEN is a further development of the dense design. Here the aluminium core is coated alternately with a long and short polyurethane foam lamella. The overall height of the coating is also adaptable to the respective application and is therefore variable (standard: 35 mm). Because of the variant of the open design, the abrasive belt can better cool because the heat from the belt sanding process is better dissipated. Through the precise adaptation of the extremely soft running cushion to the workpiece that shoud be found it is possible to achieve high-performance results when finish grinding. Advantages The contact wheels of the FAPI-PUS – series are coated only with polyurethane foam lamellae. Benefits of contact wheels with polyurethane foam lamellae: Highly elastic (adaptable) Wear-resistance Oil-resistance Grease-resistance We will be happy to advise you in order to find a suitable contact wheel for you.
Request for a quoteFRIEDRICH AUGUST PICARD GMBH & CO. KG
Germany
With the contact wheel FAPI-PUS DENSE, the aluminium hub is coated with dense adjoining polyurethane foam lamellae. The height of the coating resp. the length of the polyurethane foam lamellae can be varied depending on the application (standard: 20 and 35 mm). The polyurethane foam lamellae provide the contact wheel with a “running cushion” with which a fine finish is possible especially when working on (strongly) cambered and profiled parts. The coating adapts to every workpiece to be found. In addition, the contact wheel FAPI-PUS dense contributes in large measure to abrasive belt cooling because the spaces between the lamellae dissipate the heat generated during belt grinding. Benefits of contact wheels with polyurethane foam lamellae: Highly elastic (adaptable) Wear-resistance Oil-resistance Grease-resistance We will be happy to advise you in order to find a suitable contact wheel for you.
Request for a quoteFRIEDRICH AUGUST PICARD GMBH & CO. KG
Germany
As the name indicates, the aluminium hub of the contact wheel FAPI-VUS DENSE is coated with dense adjoining lamellae of foamed up Vulkollan®. The length of the lamellae of foamed up Vulkollan® can be varied depending on the application (standard: 20 and 35 mm). The lamellae of foamed up Vulkollan® provide the contact wheel with a “running cushion” with which a fine finish is possible especially when working on (strongly) cambered and profiled pieces. The coating adapts to every workpiece to be found. In addition, the contact wheel FAPI-VUS dense contributes in large measure to abrasive belt cooling because the spaces between the lamellae dissipate the heat. Benefits of contact wheels with lamellae of foamed up Vulkollan® : Highly elastic (adaptable) Wear-resistance Oil-resistance Grease-resistance We will be happy to advise you in order to find a suitable contact wheel for you.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
KEIPER has an extensive range of flat belts, including high-performance flat belts, power transmission belts, folder-gluer belts, machine belts, tangential belts and conveying belts. For the perfect power transmission, conveying or control solution in any industrial sector. Keiper flat belts are designed to meet your specific requirements and applications, and, accordingly, they are made to size. Our flat belts are made of different traction layers and composite structures with different coatings such as nitrile-butadiene rubber, leather and surface structures. FLEXA With a polyamide or polyester reinforcement With a one-sided or two-sided coating of nitrile-butadiene rubber, highly resistant to abrasion and wear Different surface structures CROMA With a polyamide reinforcement With a one-sided or two-sided coating of chrome-split leather, highly resistant to abrasion and wear Butt leather belts Made of pure prestretched butt leather Rubber-and-fabric belts
Request for a quoteWIRE BELT COMPANY OSTERLOH GMBH
Germany
Wire Belt introduces our line of PEEK drive components. PEEK is an abbreviation for PolyEtherEther-Ketone, a high performance engineering thermoplastic that can operate at high temperatures and is less abrasive on your stainless steel belts than metal drive components. PEEK can be used continuously to 250°C and in hot water or steam without permanent loss in physical properties. Our PEEK line is available for all drive components including: sprockets, blanks and end rollers.
Request for a quoteWIRE BELT COMPANY LTD
United Kingdom
Wire Belt introduces our line of PEEK drive components. PEEK is an abbreviation for PolyEtherEther-Ketone, a high performance engineering thermoplastic that can operate at high temperatures and is less abrasive on your stainless steel belts than metal drive components. PEEK can be used continuously to 240°C and in hot water or steam without permanent loss in physical properties. Our PEEK line is available for all Flat-Flex®, Versa-Link™, and Compact-Grid™ drive components including: sprockets, blanks and end rollers.
Request for a quotePOLIBRAS S.A.
Portugal
Various Materials and Grains Widths: 3mm to 1600mm Lenghts: from 260mm
Request for a quotePOLIBRAS S.A.
Portugal
Belts and Rolls: various backings and abrasives Wide Belts: various backings ( Cloth, Paper ) Widths: 3mm to 1600mm Lenghts: from 260mm Materials and Grits: on customer request
Request for a quoteSPARX MACHINE TOOLS
United Kingdom
Abrasive belt grinder for the cleaning of corner welds and for the creation of spokes on rectangular pieces such as boxes, at double speed it allows to work angles of maximum height 145 mm on a support surface adjustable in height and inclination. Spoking system with two-roller fork on which abrasive belt slides, the adjustable oscillation of the rollers both in the angle and in the fulcrum allow to obtain the desired radius from R = 1 to R = 10 or cleaning with a sharp edge. The adjustment of the plane by means of a handwheel guarantees the best exploitation and correct bending of the belts of adequate width for the height of the piece.
Request for a quoteFTK FÖRDERBAND TECHNIK KILIAN GMBH
Germany
The FTK curved scraper is for use on light to heavy conveyor belt systems. The curved solid carbide bar of Curved standard stripper has particularly in the center of the conveyor belt a high wiping effect and relieves the pressure on the outer edges. belt speeds up to 2 m/s with the mini model. belt speeds from 2 m/s upwards with the reinforced model. specially for use with extremely adhering and abrasive materials and damaged belts and having only a minimal installation height. Areas of use various plants, e.g. for sand, gravel, recycling, compost, clay, brick, asphalt mixing plants and in the gypsum, cement and glass industries etc. Any products adhering to the belt reduce the life expectancy of the conveyor due to the heavy soiling The consequences are usually expensive maintenance measures and production down times. The FTK Förderband Technik Kilian belt conveyor scrapers represent a cost effective development in the field of belt cleaning.
Request for a quoteFTK FÖRDERBAND TECHNIK KILIAN GMBH
Germany
The FTK HM inner belt scraper is for use on light to heavy conveyor belt systems. High tech hard metal enables a particularly high time of exposure. The HM inner belt scraper prevents the material from settling in the inner belt between the belt and the drum and so damaging the drum. Belt speeds of up to 2 m/s with the mini model. Belt speeds from 2 m/s with the reinforced model. specially for use with extremely adhering and abrasive materials and damaged belts and having only a minimal installation height. Areas of use various plants, e.g. for sand, gravel, recycling, compost, clay, brick, asphalt mixing plants and in the gypsum, cement and glass industries etc. Any products adhering to the belt reduce the life expectancy of the conveyor due to the heavy soiling. The consequences are usually expensive maintenance measures and production down times.
Request for a quoteFTK FÖRDERBAND TECHNIK KILIAN GMBH
Germany
The FTK master cleaner scraper is for use on light to heavy conveyor belt systems. belt speeds up to 2 m/s with the mini model. belt speeds from 2 m/s upwards with the reinforced model. specially for use with extremely adhering and abrasive materials and damaged belts and having only a minimal installation height. Areas of use various plants, e.g. for sand, gravel, recycling, compost, clay, brick, asphalt mixing plants and in the gypsum, cement and glass industries etc. Any products adhering to the belt reduce the life expectancy of the conveyor due to the heavy soiling. The consequences are usually expensive maintenance measures and production down times. The FTK Förderband Technik Kilian belt conveyor scrapers represent a cost effective development in the field of belt cleaning. Due to the flexible mounting arrangements and the gentle but thorough cleaning, the FTK Förderband Technik Kilian belt conveyor scrapers lead
Request for a quotePOUGET
France
USE : - Descaling rails (Stepping-up, Preparing Connection Welds, Laying Silencers in the rail Web). - Grinding Rail Corrugation with Abrasive Belt (for NB-15 Rail Grinding and Scrubber) - Cleaning of Bolts and Coachscrews on Tracks. ADVANTAGES : High Effetctive and Quality Results. * Descaling Brushes with hardened Steel Wires External Ø (mm) Reference 60 1097-R 80 1097-M 100 1097-P 120 1097 * Lamella Brushes with Ø 8 mm Rod - Width 30 m m. External Ø (mm) Reference 60 1039-P 80 1039-Q 100 1039-R * Metallic Cup-Brush Ø 230 mm To clean Bolts and Coachscrews - Ref. B-230 (Suitable of J.10, T-11, and J-12 Machines) * Ceramic Abrasive Belts (for NB-15 Grinding and Scrubber Machine) - Rail Corrugation Grinding. - Width = 60 mm : * Heavy-Grain ( Rough) - Ref. BAC-24 * Fine-Grain ( Finish) - Ref. BAZ-36 These Belts allow to grind about 1000 meters of rail.
Request for a quotePOUGET
France
USE : - Grinding of Rail Corrugation - Descaling rails before stepping-up (Scale Acts as an insulator) KEY POINT : This Machine is equipped with a Plated Jewellery of pressure on ceramic abrasive Belt for more efficient Grinding of the Running Rail-Surface. CHARACTERISTICS : - HONDA 4-Stroke petrol engine - 9 HP - 1 Adjusting inclination Device - 1 Jewellery of pressure on abrasive Belt - 1 Endless Ceramic Abrasive Belt, Width 60 mm. - 2 Rolls on opposite rails - 2 Transport Wheels on side path (Carried by 1 Single Operating Agent) Net Weights : Machine 98 Kg / Transport Trolley 12 Kg OPTIONS : - Triphase 220/380 V Electric Motor- Ref. E - Guiding Ramps of 20 Rolls (for grinding Rail Corrugation) - Ref. N-16 - Lighting for Night Works - Ref. PE - Guiding Rolls Tramway - Ref. GT - Hand Extinguisher - Ref. EXT - Spart Parts : Ceramic Abrasives Belt - Ref. BAC-24
Request for a quoteOSMAK RULO MAKINA SAN. VE LTD.STI
Turkey
Hot Vulcanized Drive Pulley: The pulley that drives the belt. Prevents abrasion. Coated with rubber to enable the pulley to grip the body of the pipe tightly. With detachable shaft and is connected to the pulley pipe by a clamp system.
Request for a quoteResults for
Abrasive belts - Import exportNumber of results
39 ProductsCompany type
Category