Abrasion materials - Import export

It is an abrasive made from natural minerals, resistant, reusable and iron-free. Hardness: 9-10 mohs Shape: angular Density: 3.2 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

UĞURMAK CDK Series Primary Impact Crushers have a design that allows the rotor, two pendulum systems and wear plates to work in harmony. Thanks to this compatibility, it offers high performance and low operating costs. It can provide very high size reduction ratios in breaking not very hard and non-abrasive materials. Thanks to these advantages, they are preferred in primary crushing stage in crushing and screening plants. According to the design of the facility, they can be manufactured as mobile, with fixed steel legs, with fixed concrete legs, with fixed skid chassis.

While the grain is carried upwards with the anchors made of hard material resistant to abrasion formed in appropriate dimensions on the rotor in an angled semi-cylindrical body made of stainless steel, the water is absorbed by the grain by subjecting it to intensive mixing at a measured speed. It is used in grain processing plants to ensure that the desired moisture content of the grains penetrate and feed the grain sufficiently. It brings the grain to be annealed with water and provides a homogeneous mixture. At the same time, a significant amount of peeling is ensured in the grain shell as a result of friction caused by the rotor rotating at high speed. Application Fields ◾ At food industry ◾ At the dry cleaning units of the flour and semolina mills ◾ At the grain processing plants where moistening process is required

iglidur® clip bearing, metric d1 [mm]: iglidur® clip bearing, inch d1 [inch]: iglidur® clip bearings are especially intended for the shaft bushing through plates. For this reason the bearing has a flange on each of the two front sides. After the clip-on the bearings are secured on both sides in the plate. The clip bearings have chamfered slot on the side that enables the mounting of the bearing on one side. After the mounting the bearing straddles and lines the bore in the plate. The shaft prevents the clip bearing from slipping out of the bore. The bearing cannot slip out of the bore even in axial movements. Extremely simple mounting through lateral slot Maintenance-free and self-lubricating Good flexibility in punch hole Good abrasion resistance Quiet operation Suitable for rotary and linear movements Extendibility through the slot Undetachable through double flange Special dimensions possible Plate thicknesses from 3 mm to 4 mm available from stock Material: iglidur® M250 Special properties of the iglidur® clip bearings iglidur® clip bearings are made from the most abrasion-resistant material, iglidur® M250. iglidur® M250 is a bearing material for rugged, wear-resistant bearing systems for medium loads. The bearings are self-lubricating and can be used dry. If required the bearings can also be lubricated. The material iglidur® M250 is resistant to all common lubricants. The iglidur® clip bearings are the ideal solution for bearing functions with low loads. The easy mounting makes it ideal for applications with difficult bearing locations. Compressive strength The permitted static surface pressure of iglidur® M250 amounts to 20 MPa at room temperature. Due to the good adaptability to uneven surfaces of the bearing housing, a high pressure load capacity of the clip bearings persists even in punched holes. For the most small bearing surfaces, the good vibration dampening properties and the insensitivity to misalignment are of primary importance. Surface speeds Clip bearings are particularly wear resistant in slow rotating, oscillating and axial motions. You can find the maximum gliding speeds for the various motions for the iglidur® M250 material under the materials data link shown below. A lubrication at installation or continuous lubrication raises the permitted surface speeds. Clip bearings are available from stock in dimensions of 3 to 25 mm. Fixation Triflex RS For mounting, the bearings are laterally pressed together with the large flange. The chamfered slot makes the bearing spiral-shaped, whereby it can be easily inserted in the plate. The remaining slot in the attached clip bearing can compensate for linear expansions of the circumference. Thus narrow bearing clearances are possible with clip bearings. The bearing clearance is dimensioned in such a way that in a housing bore with a nominal diameter, a shaft made with the same nominal diameter turns easily. The clip bearing can be used in H-tolerance housings up to H13. The turning of the clip bearing in the bore is also permitted. Operating temperatures The wear resistance of the iglidur® clip bearings are excellent with operating temperatures till 80°C. Even at low temperature the bearings remain elastic and abrasion resistant. When to use it? When a sheet metal feedthrough is required When the bearing should be captively clipped on in a drill hole with rough tolerance For rotating, linear and pivoting movements When a quick-mounting bearing solution is sought Clip bearings application examples When not to use it? When constant temperatures of more than +80°C occur iglidur® G When a high-precision bearing is needed iglidur® J When the housing bore is more than 4 mm long iglidur® Clips 2 iglidur® MKM When very high surface pressures occur iglidur® G iglidur® clip bearing, metric d1 [mm]: iglidur® clip bearing, inch d1 [inch]:

Product name: Silicon Carbide SIC Nanopowder 90% Place of Origin: China Application: refractory materials Shape: Powder Material: silicon carbide Chemical Composition: Si2O3 Color: Black SiO2: 90%min Usage: Metallurgy Deoxidizer Package: 1 Ton/bag Payment: L/C T/T Supply Ability: 1000 Ton/Tons per Week Lead Time:15-30days Port of shipment:Xiamen,China Applications 1.metallurgical deoxidizer 2.high temperature resistant materials 3.as abrasive,abrasive tools can be used to such as grinding wheels,whetstones,grinding head, sand tile etc Advantages 1.corrosion resistance,high strength,high hardness, 2.good wear-resisting performance,resist to shock 3.stable chemical performance,high thermal conductivity,high resistant temperature

Belt width: 500-1800 mm Recommended speed: max. 3.0 m/s Quick and simple exchange of wear parts Blade material: polyurethane + hard metal / stainless steel / ceramic

Belt width: 1400-2200 mm Recommended speed: max. 3.8 m/s Quick and simple exchange of wear parts Blade material: hard metal

Belt width: 500-1400 mm Recommended speed: max. 3.5 m/s Quick and simple exchange of wear parts Blade material: hard metal

Belt width: 1200-2400 mm Pulley diameter: 800-1500 mm Recommended speed: max. 4.5 m/s Blade material: polyurethane (optional + aluminum oxide granulate)

Belt width: 1000-1800 mm Pulley diameter: 630-1000 mm Recommended speed: max. 3.5 m/s Blade material: polyurethane

Belt width: 1200-2200 mm Pulley diameter: 630-1250 mm Recommended speed: max. 4.0 m/s Blade material: hard metal

Belt width: 500-1400 mm Pulley diameter: 320-800 mm Recommended speed: max. 3.6 m/s Blade material: hard metal

Belt width: 500-1800 mm Pulley diameter: 320-630 mm Recommended speed: max. 3.5 m/s Quick and simple exchange of wear parts Blade material: polyurethane (optional + aluminum oxide granulate)

Belt width: 500-1400 mm Pulley diameter: 320-630 mm Recommended speed: max. 3.0 m/s Blade material: polyurethane (optional + aluminum oxide granulate)

The compact 3VPHD12 Pharma Dispenser enables precise and reliable dosing of a wide variety of materials. Thanks to the special rotor-stator geometry, no valve is required to prevent the medium from flowing out independently. Alternating opening chambers ensure gentle product transport and pulsation-free output. The VPHD series was specially developed for applications in the pharmaceutical, biotechnology, medical and food industries. Your advantages: - Interior with optimised dead space - Design according to EHEDG guidelines - FDA-compliant design/development - hygienic and pharmaceutical design - Works certificate 3.1 (DIN EN 10204) - all surfaces for pharmaceutical applications Ra ≤ 0.8 μm - retraction option (no dripping or thread pulling) - absolutely linear relationship between rotor speed and spread rate - long service life due to media-specific component selection

Using fleece rolls or pre-cut fleece sheets from Tyrolit provides an excellent tool for hand sanding and orbital sanders, perfectly adapting to surfaces. These materials consist of abrasive grains bonded to a three-dimensional nylon filament support, ideal for cleaning and machining surfaces like stainless steel, aluminum, brass, copper, plastics, and titanium. Our fleece rolls come in various specifications for different applications, from cleaning welding seams to superfine polishing for satin finishes on metals and stainless steel. Benefits include consistent finishing, long lifetime, flexibility, tear resistance, and cool grinding without clogging. They are also waterproof and washable, leaving no rust. Conclusion: Tyrolit's fleece rolls and sheets offer easy-to-handle tools for various surface machining tasks, ensuring clean, residue-free, and finished surfaces.

Short description: Rubber spiral hose Water hose for suction and discharge purposes in tough applications such as in industry, agriculture and construction. The tube is suited for water, sewage, liquid manure, drilling mud and low abrasive materials. The cover is abrasion and weather resistant.

Short description: Rubber spiral hose, 5 m length Water hose for suction and delivery purposes in tough applications in industry, agriculture, and construction. The tube is suited for water, sewage, liquid manure, drilling mud and low abrasive materials. The cover is abrasion and weather resistant. With spiral free cuffs.

Activeabsorption impact protection If secutex Soft is coated by a Powerflex surface, dirt particles and liquids are prevented from penetrating the foam. Additionally, openpore material protects against abrasion, without losing its elastic properties.

Applications at high speed and low pressure. With O‑ring as secondary seal for sealing in the groove base. Hygienic design without undercuts. No sump formation in front of the seal. Reduced heat buildup due to special lip design. Pressureactivated seal energization. The integrated wedge prevents the sealing lip turning inside out. Very long seal life due to high abrasion resistance. Material only generates low frictional force. Sealing lip does not stick to the mating surface even after prolonged shutdown

▪ Automated emptying system for containers up to approx. 30 liters ▪ Volumetric conveying progressive cavity pump based on the endless piston principle ▪ Pulsation-free and precise emptying and material supply to 1C and 2C dispensing systems ▪ In redundant dosing systems applicable ▪ For medium to high viscosity materials ▪ For structure sensitive, filled, abrasive materials ▪ Application for cylindrical or slightly conical metal and plastic containers ▪ Housing for machine safety and protection against dirt contamination ▪ Automatic retraction and venting the container as well as detection of media surface ▪ 4“-Touch panel with function keys for comfortable setting and parametrization of the system ▪ Externally controllable via Profinet interface ▪ Continuous determination of the position of the follower plate and level monitoring ▪ Adjustable pressure reduction for longer pauses

For use in peristaltic pumps to transport aggressive media, abrasive materials, highly viscous liquids and foodstuffs in practically all industrial fields. Construction: Tube in light or dark special qualities for abrasive media, liquids to max. 80°C (NR) for drinking water (IIR) for oils, petrol, fuels to max. 80°C (NBR) for aggressive media to max. 120°C (CSM) for chemical media (EPDM) FDA-approved food quality Special fabric inlays Interior smooth, exterior smooth polished SIMON – peristaltic pump hoses are manufactured with special fabric inlays developed specifically for the application. This guarantees harmonious flexing with permanently stable cross-sections. With the dynamically adjusted elastomers mixtures the result is lower overpressing with perfect tightness and low working temperatures. This achieves exceptionally long service life. These hoses are polished with abrasive tools in special alloys. This method guarantees a homogenous surface microstructure of the...

Clothing instead of landfill PET must beone of the most interesting recycling materials of recent years as, during this time, not only new bottles, but also clothing and much more have been produced from recycled bottles. In Germany alone, each year the volume of PET bottles discarded when empty has exceeded 400,000 [tonnes], 96% of which is taken to professional recycling. An additional 60,000 tonnes arises annually as packaging material. However, PET is an extremely abrasive material, which exacts enormous demands on the tools used in recycling. Our knives have been proven by their high resistance to wear, and we also supply, in addition to our proven quality standards, extremely hardwearing special qualities.

Precise atomisation and spraying can be continuous or selective. The revolutionary combination of continuous flask and low-flow spray chamber guarantees perfect spraying of low to highly viscous media with high edge sharpness and minimum overspray. Fields of activity: - Dosing - Coating - Microsputtering - Lubrication - Marking and much more. Materials: - Fats/oils - Colours - Activators/primers - Abrasive materials - Adhesives - Silicones - Solid-laden materials and much more. Advantages: - Constant quantity/area - Uniform spray pattern - Uniform coating - Little overspray/high edge sharpness - Defined volume per revolution - High chemical resistance - High spread - Adjustable round jet - From dot spraying to continuous spraying - Low-maintenance system - flow rate of the medium and atomising air can be regulated independently - High application efficiency

Sharpener SSG is suitable for gentle processing of all Durablade® involute blades with low material abrasion. The compact unit for various sharpening angles ensures constant sharpening of the cutting edge thanks to the rotating contour tracking. A counter is integrated for individual specification of sharpening cycles. A water bath improves the sharpening result. Advantages Gentle blade processing Low level of material removal Non-actively driven sharpening discs Compact device for different sharpening angles Constant sharpening of cutting edge thanks to all-round contour tracing Counter for the individual specification of sharpening cycles Water bath for improved sharpening Simple operation Very quiet running Long blade service life

ViscoTec 1C dispenser vipro-PUMP ▪ Volumetric dispensing, regardless of viscosity ▪ For low to high viscosity materials ▪ Particularly suitable for highly abrasive, filled or shear sensitive materials ▪ Modular scalability of volume flow within the model range ▪ Programmable suck-back prevents dripping or stringing of product ▪ Material entry with Tri-Clamp DN 20 connection for optimized material flow and fast coupling of material supply ▪ Locking ring for easy and fast disassembling of drive unit ▪ Drive unit connection with optimized power transmission free from clearance ▪ Optimized dispenser bracket for easy adjustable mounting ▪ Long lifetime due to low wear ▪ Different rotor and stator materials available ▪ Continuous dosing, pulsation free ▪ Interior non-stick coated ▪ Dividable rotor assembly for easy & fast replacement and low spare part costs ▪ Easy cleaning and maintenance due to quick assembly and disassembly options

The B80 KME series was developed as a wet-installed centrifugal immersion pump for stationary use in tanks and basins. The direct-coupled pump with plain bearings is suitable for pumping and circulating neutral and chemically aggressive liquids in the chemical industry and process engineering, in electroplating and surface technology, in washing systems and water treatment plants, for sump drainage in industrial and municipal waste disposal plants or as a circulation pump in gas scrubbers and heat exchangers. * with various plain bearing designs * available in immersion depths from 600 - 1500 mm Features & Advantages * Compact dimensions * Abrasion resistant material combinations possible * Extremely low-vibration and low-wear operation * All wetted parts made of corrosion resistant plastic * Self-centering alignment in the bearing shell

The ViscoMT-XM barrel emptying system with volumetric pump based on the endless piston principle. Your advantages: - for medium to high viscosity products (up to 7,000,000 mPas) - suitable for abrasive, shear-sensitive or lumpy materials loaded with fillers - clean wiping of the inside wall of the barrel due to follower plate with special sealing lip - suitable for cylindrical, ribbed or slightly conical barrels, plastic containers or containers with inliners - no lateral squeezing of the medium, as the follower plate is guided almost without pressure - discharge speed electronically adjustable - easy handling - pulsation-free conveyance/discharge - Residual quantity in the barrel: < 1% - compact design Application: Withdrawal of products directly from the delivery or storage container, e.g.: Tomato paste, honey, fats, icing, mascara and much more. pressure-controlled or level-controlled feeding of the products to filling machines or mixing processes.

▪ Hygienic design for food, cosmetic and pharmaceutical applications ▪ Easy integration into automated processes due to compact design ▪ Length and weight savings compared to existing pumps ▪ Short cycle times ▪ Non-destructive dosing of solid containing materials with diameter of up to 20 mm ▪ Volumetric dosing and filling, regardless of viscosity ▪ For low to high viscosity materials ▪ Long service life even with abrasive and shear sensitive materials ▪ Continuous dosing, pulsation free ▪ Precise filling with high repeatability ▪ Linear relation between dosing volume and rotational speed ▪ Programmable suck-back prevents dripping or stringing of product ▪ FDA compliant elastomers ▪ Wetted components are autoclavable ▪ Stainless steel ▪ Optional flushing connection for optimum results with CIP ▪ Easy cleaning and maintenance due to quick assembly and disassembly options